top of page

Load data for .30 BR + .308 | 150gr Hornady ECX

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.30 BR + .308 | 150gr Hornady ECX

Load Specifications

Bullet:
.308 | 150gr Hornady ECX
Manufacturer SKU:
30372
Bullet Weight:
150gr | 9.7g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.200" | 30.5mm
Caliber:
.30 BR
Case Length (l3):
1.501" | 38.1mm
Cartridge Length (C.O.L.):
2.070" | 52.6mm
Seated Depth:
0.631" | 16.0mm
Shank Seated Depth:
0.631" | 16.0mm
Case Capacity:
41.0 Grains of Water | 2.66 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
58740 psi | 4050 bar
LID:
LID_B1382_C297

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 60 loads in caliber .30 BR with .308 | 150gr Hornady ECX bullet and 30 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
87%
51953
88%
**41
100%
ADI AR 2207 👍
<<locked>>
96%
43569
74%
**10
100%
ADI AR 2219
<<locked>>
97%
41611
71%
**90
95%
Accurate 1680 👍
<<locked>>
91%
51039
87%
**59
98%
Accurate 2015
<<locked>>
97%
32793
56%
**36
95%
Accurate 5744
<<locked>>
85%
51503
88%
**49
100%
Accurate No. 11 FS
<<locked>>
83%
51416
88%
**06
100%
Alliant AR-Comp
<<locked>>
96%
29385
50%
**00
95%
Alliant Reloder-10x
<<locked>>
97%
36956
63%
**28
97%
Alliant Reloder-7 👍
<<locked>>
96%
46891
80%
**20
99%
Baschieri & Pellagri 106
<<locked>>
96%
41655
71%
**08
95%
[Hodgdon CFE BLK]*
<<locked>>
96%
48776
83%
**80
92%
[Hodgdon H322]*
<<locked>>
96%
34127
58%
**49
92%
[Hodgdon H335]*
<<locked>>
97%
40524
69%
**77
93%
Hodgdon H4198
<<locked>>
97%
46369
79%
**60
96%
IMR 4198
<<locked>>
96%
40103
68%
**15
98%
IMR 4227 👍
<<locked>>
94%
51430
88%
**26
100%
Lovex D060
<<locked>>
87%
52286
89%
**59
100%
Lovex D063
<<locked>>
83%
51924
88%
**39
100%
Lovex S053
<<locked>>
95%
51169
87%
**10
100%
Norma 200
<<locked>>
96%
41191
70%
**87
99%
ReloadSwiss RS 36 👍
<<locked>>
95%
52547
89%
**82
100%
SNPE Vectan BA6 1/2
<<locked>>
97%
49385
84%
**56
100%
[SNPE Vectan SP 10]*
<<locked>>
96%
40190
68%
**77
93%
Shooters World Blackout
<<locked>>
83%
51924
88%
**39
100%
Shooters World Buffalo Rifle
<<locked>>
87%
52286
89%
**59
100%
Vihtavuori N110
<<locked>>
89%
52359
89%
**51
100%
Vihtavuori N120
<<locked>>
96%
41278
70%
**38
100%
Vihtavuori N130
<<locked>>
96%
34345
58%
**19
96%
[Vihtavuori N133]*
<<locked>>
96%
28979
49%
**98
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
43323
74%
**33
100%
ADI AR 2207
<<locked>>
81%
27876
47%
**24
98%
[ADI AR 2219]*
<<locked>>
88%
31140
53%
**83
90%
Accurate 1680
<<locked>>
81%
37101
63%
**39
95%
[Accurate 2015]*
<<locked>>
86%
23525
40%
**19
90%
Accurate 5744
<<locked>>
81%
46311
79%
**74
99%
Accurate No. 11 FS
<<locked>>
81%
47718
81%
**64
100%
[Alliant AR-Comp]*
<<locked>>
87%
22524
38%
**93
90%
[Alliant Reloder-10x]*
<<locked>>
81%
22887
39%
**03
91%
Alliant Reloder-7
<<locked>>
81%
29501
50%
**08
95%
[Baschieri & Pellagri 106]*
<<locked>>
84%
29341
50%
**69
91%
[Hodgdon CFE BLK]*
<<locked>>
93%
43888
75%
**08
90%
[Hodgdon H322]*
<<locked>>
93%
30792
52%
**77
90%
[Hodgdon H335]*
<<locked>>
92%
34040
58%
**52
90%
[Hodgdon H4198]*
<<locked>>
83%
31314
53%
**95
90%
[IMR 4198]*
<<locked>>
81%
26092
44%
**19
94%
IMR 4227
<<locked>>
81%
35520
60%
**87
99%
Lovex D060
<<locked>>
81%
43714
74%
**34
99%
Lovex D063
<<locked>>
81%
48312
82%
**90
99%
Lovex S053
<<locked>>
81%
34301
58%
**60
100%
[Norma 200]*
<<locked>>
81%
25744
44%
**78
94%
ReloadSwiss RS 36
<<locked>>
81%
34229
58%
**03
98%
SNPE Vectan BA6 1/2
<<locked>>
81%
32880
56%
**32
100%
[SNPE Vectan SP 10]*
<<locked>>
91%
33924
58%
**52
90%
Shooters World Blackout
<<locked>>
81%
48312
82%
**90
99%
Shooters World Buffalo Rifle
<<locked>>
81%
43714
74%
**34
99%
Vihtavuori N110
<<locked>>
81%
41321
70%
**19
100%
Vihtavuori N120
<<locked>>
81%
26571
45%
**62
99%
[Vihtavuori N130]*
<<locked>>
82%
23250
40%
**60
91%
[Vihtavuori N133]*
<<locked>>
92%
26092
44%
**26
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page