Load data for .30 BR + .308 | 125gr | Sierra Tipped MatchKing

.30 BR cartridge drawing
Sierra logo

Load Specifications

Bullet Manufacturer:Sierra
Bullet Weight:125 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):1.501"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:41 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:58,740 psi
Recommended Twist Rate:1:13.5

Load data in caliber .30 BR with .308 | 125gr | Sierra Tipped MatchKing bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 36, IMR 4227 and Lovex S053.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>96%52,591 psi90%2680 fps99%
Accurate 5744<<locked>>82%52,576 psi90%2707 fps99.6%
Accurate LT-30ᴾ<<locked>>100%49,530 psi84%2618 fps96.3%
Accurate No. 11 FS<<locked>>84%51,793 psi88%2651 fps100%
ADI AR 2205<<locked>>86%49,821 psi85%2539 fps100%
ADI AR 2207ᴾ<<locked>>100%49,545 psi84%2730 fps100%
Alliant AR-Compᴾ<<locked>>100%32,808 psi56%2474 fps96%
Alliant Reloder-10xᴾ<<locked>>100%40,770 psi69%2612 fps97.5%
Alliant Reloder-7ᴾ<<locked>>100%52,286 psi89%2726 fps99.5%
Baschieri & Pellagri 106ᴾ<<locked>>100%47,050 psi80%2605 fps96.1%
Hodgdon H4198<<locked>>98%51,764 psi88%2667 fps96.2%
Hodgdon TrailBossᴾ<<locked>>100%29,689 psi51%1598 fps100%
IMR 4198ᴾ<<locked>>100%44,411 psi76%2615 fps98.8%
IMR 4227<<locked>>94%51,996 psi89%2667 fps100%
Lovex D060<<locked>>88%53,026 psi90%2713 fps99.6%
Lovex D063<<locked>>84%52,765 psi90%2690 fps99.6%
Lovex S053<<locked>>96%52,475 psi89%2664 fps100%
Norma 200ᴾ<<locked>>100%46,282 psi79%2697 fps99.1%
ReloadSwiss RS 14ᴾ<<locked>>100%29,153 psi50%1634 fps100%
ReloadSwiss RS 36<<locked>>94%50,589 psi86%2694 fps99.9%
Shooters World Blackout<<locked>>84%52,765 psi90%2690 fps99.6%
Shooters World Buffalo Rifle<<locked>>88%53,026 psi90%2713 fps99.6%
Shooters World SOCOM<<locked>>86%50,676 psi86%2641 fps99.7%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%53,098 psi90%2523 fps100%
Vihtavuori N110<<locked>>90%52,286 psi89%2582 fps100%
Vihtavuori N120ᴾ<<locked>>100%49,690 psi85%2687 fps100%
Vihtavuori N130ᴾ<<locked>>100%39,595 psi67%2520 fps96.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%33,156 psi56%2343 fps95%
Accurate 5744<<locked>>80%49,574 psi84%2661 fps99.3%
Accurate LT-30<<locked>>96%44,092 psi75%2530 fps95.1%
Accurate No. 11 FS<<locked>>80%45,542 psi78%2559 fps100%
ADI AR 2205<<locked>>80%41,684 psi71%2418 fps100%
ADI AR 2207<<locked>>80%26,716 psi45%2280 fps97%
Alliant AR-Comp<<locked>>98%30,893 psi53%2425 fps95.1%
Alliant Reloder-10x<<locked>>94%33,591 psi57%2467 fps95.5%
Alliant Reloder-7<<locked>>84%32,285 psi55%2365 fps95.5%
Baschieri & Pellagri 106<<locked>>98%44,048 psi75%2559 fps95.4%
Hodgdon H4198<<locked>>96%48,863 psi83%2625 fps95.6%
Hodgdon TrailBoss<<locked>>80%21,553 psi37%1421 fps100%
IMR 4198<<locked>>88%31,618 psi54%2346 fps95.4%
IMR 422723.4 gr80%34,214 psi58%2359 fps98%
Lovex D060<<locked>>80%41,959 psi71%2526 fps98.2%
Lovex D063<<locked>>80%46,427 psi79%2595 fps99%
Lovex S05322.9 gr80%33,214 psi57%2339 fps99.8%
Norma 200<<locked>>86%29,805 psi51%2365 fps95%
ReloadSwiss RS 14<<locked>>80%21,292 psi36%1457 fps100%
ReloadSwiss RS 3624.9 gr80%33,054 psi56%2379 fps97.6%
Shooters World Blackout<<locked>>80%46,427 psi79%2595 fps99%
Shooters World Buffalo Rifle<<locked>>80%41,959 psi71%2526 fps98.2%
Shooters World SOCOM<<locked>>80%41,597 psi71%2497 fps98.7%
SNPE Vectan BA6 1/2<<locked>>80%31,575 psi54%2198 fps100%
Vihtavuori N110<<locked>>80%39,291 psi67%2395 fps100%
Vihtavuori N120<<locked>>80%27,093 psi46%2257 fps98.2%
Vihtavuori N130<<locked>>96%35,172 psi60%2431 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .30 BR loaded with the .308 | 125gr | Sierra Tipped MatchKing. ADI AR 2207 delivers the highest muzzle velocity at 2,730 fps; across all powders the maximum-charge window runs from 1,598 fps to 2,730 fps. Accurate LT-30 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (405 MPa), the top charges use 50–90 %, leaving at least 10 % headroom. The 125.0 gr projectile in 0.308" calls for a 1:13.5 twist; slower twists will usually not stabilise this weight. Accurate LT-30, ADI AR 2207, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 36, IMR 4227, Lovex S053 rank at the top here: for .30 BR with the .308 | 125gr | Sierra Tipped MatchKing they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data