Load data for .30 BR + .308 | 115gr | Berger Target FB

.30 BR cartridge drawing
Berger logo

Load Specifications

Bullet Manufacturer:Berger
Bullet Weight:115 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):1.501"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:41 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:58,740 psi
Recommended Twist Rate:1:16.0

Load data in caliber .30 BR with .308 | 115gr | Berger Target FB bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 36, ADI AR 2207 and Alliant Reloder-7.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>94%50,183 psi85%2802 fps98.6%
Accurate 5744<<locked>>82%53,127 psi90%2877 fps99.5%
Accurate LT-30ᴾ<<locked>>100%50,328 psi86%2782 fps96.3%
Accurate No. 11 FS<<locked>>84%52,344 psi89%2818 fps100%
ADI AR 2205<<locked>>86%50,386 psi86%2703 fps100%
ADI AR 2207ᴾ<<locked>>100%50,328 psi86%2900 fps100%
Alliant Reloder-10xᴾ<<locked>>100%41,336 psi70%2772 fps97.4%
Alliant Reloder-7ᴾ<<locked>>100%53,156 psi90%2900 fps99.4%
Baschieri & Pellagri 106ᴾ<<locked>>100%47,877 psi82%2766 fps96.1%
Hodgdon H4198<<locked>>98%52,359 psi89%2835 fps96%
Hodgdon TrailBossᴾ<<locked>>100%29,573 psi50%1706 fps100%
IMR 4198ᴾ<<locked>>100%44,976 psi77%2779 fps98.7%
IMR 4227<<locked>>94%52,663 psi90%2838 fps100%
Lovex D060<<locked>>86%50,343 psi86%2835 fps99.3%
Lovex D063<<locked>>82%49,922 psi85%2808 fps99.3%
Lovex S053<<locked>>96%53,156 psi90%2831 fps100%
Norma 200ᴾ<<locked>>100%47,007 psi80%2861 fps99%
ReloadSwiss RS 14ᴾ<<locked>>100%29,008 psi49%1742 fps100%
ReloadSwiss RS 36<<locked>>94%51,619 psi88%2867 fps99.9%
Shooters World Blackout<<locked>>82%49,922 psi85%2808 fps99.3%
Shooters World Buffalo Rifle<<locked>>86%50,343 psi86%2835 fps99.3%
Shooters World SOCOM<<locked>>86%51,314 psi87%2808 fps99.7%
SNPE Vectan BA6 1/2<<locked>>98%51,488 psi88%2657 fps100%
Vihtavuori N110<<locked>>90%53,127 psi90%2753 fps100%
Vihtavuori N120ᴾ<<locked>>100%50,502 psi86%2854 fps100%
Vihtavuori N130ᴾ<<locked>>100%40,509 psi69%2684 fps96.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%36,216 psi62%2546 fps95.7%
Accurate 5744<<locked>>80%49,966 psi85%2828 fps99.2%
Accurate LT-30<<locked>>98%47,224 psi80%2733 fps95.6%
Accurate No. 11 FS<<locked>>80%46,093 psi78%2723 fps100%
ADI AR 2205<<locked>>80%42,018 psi72%2572 fps100%
ADI AR 220726 gr80%27,137 psi46%2425 fps96.8%
Alliant Reloder-10x<<locked>>94%34,301 psi58%2621 fps95.4%
Alliant Reloder-728.2 gr84%32,561 psi55%2510 fps95.3%
Baschieri & Pellagri 106<<locked>>98%45,063 psi77%2720 fps95.4%
Hodgdon H4198<<locked>>96%49,153 psi84%2782 fps95.4%
Hodgdon TrailBoss<<locked>>80%21,741 psi37%1526 fps100%
IMR 4198<<locked>>88%31,995 psi54%2493 fps95.2%
IMR 4227<<locked>>80%34,403 psi59%2507 fps97.8%
Lovex D060<<locked>>80%42,438 psi72%2687 fps98.1%
Lovex D063<<locked>>80%46,847 psi80%2756 fps98.9%
Lovex S053<<locked>>80%33,591 psi57%2490 fps99.7%
Norma 200<<locked>>88%32,198 psi55%2562 fps95.6%
ReloadSwiss RS 14<<locked>>80%21,132 psi36%1555 fps100%
ReloadSwiss RS 3627 gr80%33,257 psi57%2523 fps97.3%
Shooters World Blackout<<locked>>80%46,847 psi80%2756 fps98.9%
Shooters World Buffalo Rifle<<locked>>80%42,438 psi72%2687 fps98.1%
Shooters World SOCOM<<locked>>80%42,032 psi72%2651 fps98.6%
SNPE Vectan BA6 1/2<<locked>>80%31,807 psi54%2336 fps100%
Vihtavuori N110<<locked>>80%39,711 psi68%2552 fps100%
Vihtavuori N120<<locked>>80%27,499 psi47%2402 fps98.1%
Vihtavuori N130<<locked>>96%35,998 psi61%2589 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .30 BR loaded with the .308 | 115gr | Berger Target FB. ADI AR 2207 delivers the highest muzzle velocity at 2,900 fps; across all powders the maximum-charge window runs from 1,706 fps to 2,900 fps. Accurate LT-30 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (405 MPa), the top charges use 49–90 %, leaving at least 10 % headroom. The 115.0 gr projectile in 0.308" calls for a 1:16.0 twist; slower twists will usually not stabilise this weight. Accurate LT-30, ADI AR 2207, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 36, ADI AR 2207, Alliant Reloder-7 rank at the top here: for .30 BR with the .308 | 115gr | Berger Target FB they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data