Load data for .30-40 Krag + .311 | 150gr | Lehigh Defense Match Solid

.30-40 Krag cartridge drawing
Lehigh Defense logo

Load Specifications

Bullet Manufacturer:Lehigh Defense
Bullet Weight:150 gr
Bullet Diameter:0.311"
Bullet Length:<<locked>>
Case Length (l3):2.314"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:58 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:47,137 psi
Recommended Twist Rate:1:9.5

Load data in caliber .30-40 Krag with .311 | 150gr | Lehigh Defense Match Solid bullet and 45 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are IMR 3031, Winchester 748 and Accurate 2495.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>88%40,161 psi85%2510 fps99.8%
Accurate 2460<<locked>>86%40,712 psi86%2543 fps98.2%
Accurate 2495<<locked>>96%40,118 psi85%2575 fps99.9%
Accurate 2520<<locked>>90%40,973 psi87%2585 fps97.9%
Accurate 4064<<locked>>98%40,205 psi85%2602 fps98.8%
ADI AR 2219<<locked>>82%40,509 psi86%2556 fps99.1%
ADI Benchmark 8208<<locked>>90%41,974 psi89%2562 fps96.3%
Alliant AR-Comp<<locked>>92%42,351 psi90%2628 fps100%
Alliant Reloder-10x<<locked>>84%40,611 psi86%2526 fps100%
Baschieri & Pellagri 106<<locked>>82%40,872 psi87%2464 fps99.4%
Bofors RP3ᴾ<<locked>>100%42,569 psi90%2644 fps96.3%
Hodgdon Benchmark<<locked>>88%41,989 psi89%2520 fps96.9%
Hodgdon BL-C2<<locked>>92%41,974 psi89%2625 fps97%
Hodgdon H322<<locked>>86%42,105 psi89%2589 fps99.3%
Hodgdon H335<<locked>>84%39,987 psi85%2552 fps98.2%
Hodgdon TrailBossᴾ<<locked>>100%32,779 psi70%1624 fps100%
IMR 3031<<locked>>92%40,030 psi85%2612 fps99.6%
IMR 4198<<locked>>84%42,308 psi90%2510 fps100%
IMR 8208 XBR<<locked>>90%41,974 psi89%2562 fps96.3%
Lovex D073.5<<locked>>86%40,669 psi86%2543 fps97%
Lovex D073.6<<locked>>94%41,989 psi89%2618 fps98.1%
Lovex S062<<locked>>96%41,191 psi87%2569 fps96.2%
Norma 201<<locked>>92%40,799 psi87%2543 fps96.1%
Norma 202<<locked>>92%40,727 psi86%2566 fps98.4%
ReloadSwiss RS 14ᴾ<<locked>>100%32,779 psi70%1663 fps100%
ReloadSwiss RS 40<<locked>>86%41,858 psi89%2562 fps97.7%
ReloadSwiss RS 60ᴾ<<locked>>100%41,814 psi89%2674 fps97.2%
Rottweil R 901<<locked>>90%41,858 psi89%2552 fps98.4%
Rottweil R 902<<locked>>94%41,089 psi87%2543 fps96.1%
Shooters World Match Rifle<<locked>>94%41,989 psi89%2618 fps98.1%
Shooters World Precision<<locked>>96%41,191 psi87%2569 fps96.2%
SNPE Vectan SP 10<<locked>>82%41,046 psi87%2562 fps98.3%
SNPE Vectan SP 3<<locked>>84%41,553 psi88%2539 fps99.6%
SNPE Vectan Tubal 3000<<locked>>90%41,220 psi87%2487 fps98.4%
SNPE Vectan Tubal 5000<<locked>>98%42,598 psi90%2523 fps99.3%
Somchem S321<<locked>>88%42,293 psi90%2595 fps96.7%
Somchem S335<<locked>>92%42,438 psi90%2530 fps99.2%
Vihtavuori N130<<locked>>86%41,205 psi87%2484 fps100%
Vihtavuori N133<<locked>>90%40,901 psi87%2493 fps99.8%
Vihtavuori N135<<locked>>96%41,495 psi88%2585 fps99.9%
Vihtavuori N140<<locked>>94%41,162 psi87%2549 fps98.7%
Vihtavuori N150ᴾ<<locked>>100%39,740 psi84%2536 fps96.3%
Vihtavuori N530<<locked>>90%41,901 psi89%2559 fps96.3%
Vihtavuori N540<<locked>>96%42,163 psi89%2585 fps98.5%
Winchester 748<<locked>>90%40,147 psi85%2589 fps96.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>80%30,893 psi66%2316 fps98.3%
Accurate 2460<<locked>>80%33,185 psi70%2388 fps96.1%
Accurate 249534.2 gr80%23,163 psi49%2182 fps95.7%
Accurate 2520<<locked>>84%33,257 psi71%2428 fps95.7%
Accurate 4064<<locked>>88%28,790 psi61%2349 fps95.4%
ADI AR 2219<<locked>>80%37,797 psi80%2503 fps98.6%
ADI Benchmark 8208<<locked>>88%39,262 psi83%2510 fps95.5%
Alliant AR-Comp<<locked>>80%28,398 psi60%2336 fps99.5%
Alliant Reloder-10x<<locked>>80%35,897 psi76%2434 fps99.8%
Baschieri & Pellagri 106<<locked>>80%38,348 psi81%2415 fps99%
Bofors RP3<<locked>>98%39,987 psi85%2595 fps95.5%
Hodgdon Benchmark<<locked>>84%37,173 psi79%2421 fps95.5%
Hodgdon BL-C2<<locked>>88%36,361 psi77%2513 fps95.4%
Hodgdon H322<<locked>>80%34,461 psi73%2434 fps97.8%
Hodgdon H335<<locked>>80%34,722 psi74%2441 fps96.9%
Hodgdon TrailBoss<<locked>>80%24,236 psi51%1453 fps100%
IMR 303133.8 gr80%27,224 psi58%2306 fps96%
IMR 4198<<locked>>80%37,405 psi79%2421 fps100%
IMR 8208 XBR<<locked>>88%39,262 psi83%2510 fps95.5%
Lovex D073.5<<locked>>82%35,230 psi75%2434 fps95.4%
Lovex D073.6<<locked>>86%31,720 psi67%2405 fps95.1%
Lovex S062<<locked>>94%38,537 psi82%2516 fps95.5%
Norma 201<<locked>>90%38,421 psi82%2497 fps95.4%
Norma 202<<locked>>84%31,502 psi67%2369 fps95.8%
ReloadSwiss RS 14<<locked>>80%24,091 psi51%1486 fps100%
ReloadSwiss RS 40<<locked>>80%34,243 psi73%2405 fps95.5%
ReloadSwiss RS 60<<locked>>96%36,709 psi78%2559 fps95.3%
Rottweil R 901<<locked>>80%30,908 psi66%2316 fps95.2%
Rottweil R 902<<locked>>92%38,464 psi82%2490 fps95.3%
Shooters World Match Rifle<<locked>>86%31,720 psi67%2405 fps95.1%
Shooters World Precision<<locked>>94%38,537 psi82%2516 fps95.5%
SNPE Vectan SP 10<<locked>>80%38,159 psi81%2507 fps97.7%
SNPE Vectan SP 3<<locked>>80%36,376 psi77%2441 fps98.9%
SNPE Vectan Tubal 3000<<locked>>80%29,863 psi63%2244 fps95%
SNPE Vectan Tubal 5000<<locked>>84%27,398 psi58%2201 fps95.2%
Somchem S321<<locked>>84%36,753 psi78%2484 fps95.1%
Somchem S335<<locked>>80%29,211 psi62%2251 fps95.8%
Vihtavuori N130<<locked>>80%34,127 psi72%2349 fps99.5%
Vihtavuori N133<<locked>>80%29,675 psi63%2260 fps97.8%
Vihtavuori N135<<locked>>80%24,671 psi52%2205 fps96.1%
Vihtavuori N140<<locked>>84%29,820 psi63%2306 fps95.5%
Vihtavuori N150<<locked>>98%37,130 psi79%2484 fps95.5%
Vihtavuori N530<<locked>>88%39,436 psi84%2510 fps95.6%
Vihtavuori N540<<locked>>86%30,530 psi65%2339 fps95.1%
Winchester 74839.3 gr86%35,201 psi75%2484 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 45 powders for .30-40 Krag loaded with the .311 | 150gr | Lehigh Defense Match Solid. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,674 fps; across all powders the maximum-charge window runs from 1,624 fps to 2,674 fps. Bofors RP3 gives the best case fill at 100 %, and 45 of the 45 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (325 MPa), the top charges use 70–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.311" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. Bofors RP3, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. IMR 3031, Winchester 748, Accurate 2495 rank at the top here: for .30-40 Krag with the .311 | 150gr | Lehigh Defense Match Solid they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data