Load data for .30-30 Win. + .308 | 156gr | Reichenbeg HDB Ogival

Recommended Powder(s): Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 156gr \| Reichenbeg HDB Ogival
Manufacturer SKU:	30815612
Bullet Weight:	156gr \| 10.1g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.252" \| 31.8mm
Caliber:	.30-30 Win. load data
Case Length (l3):	2.039" \| 51.8mm
Cartridge Length (C.O.L.):	2.512" \| 63.8mm
Seated Depth:	0.779" \| 19.8mm
Shank Seated Depth:	0.602" \| 15.3mm
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B10475_C328
Last updated:	2025-01-01
Recommended Twist Rate:	1:12 - 1:10

Load data for 70 loads in caliber .30-30 Win. with .308 | 156gr | Reichenbeg HDB Ogival bullet and 35 powders such as Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	89%	41031	88%	**92	100%
ADI AR 2219	<<locked>>	92%	41046	88%	**18	96%
Accurate 2015	<<locked>>	97%	38450	83%	**69	98%
[Accurate 2460]*	<<locked>>	96%	39784	86%	**85	93%
Accurate 2495	<<locked>>	96%	29008	63%	**90	95%
Alliant AR-Comp	<<locked>>	97%	34345	74%	**52	99%
Alliant Reloder-10x 👍	<<locked>>	96%	41669	90%	**28	99%
Alliant Reloder-7 👍	<<locked>>	88%	41379	89%	**65	99%
Baschieri & Pellagri 106	<<locked>>	91%	40509	87%	**23	97%
[Hodgdon Benchmark]*	<<locked>>	96%	40089	86%	**33	92%
[Hodgdon CFE BLK]*	<<locked>>	87%	41017	88%	**06	92%
Hodgdon H322	<<locked>>	97%	38943	84%	**85	96%
Hodgdon H335	<<locked>>	93%	40596	87%	**15	95%
Hodgdon H4198	<<locked>>	89%	41408	89%	**26	96%
[IMR 3031]*	<<locked>>	96%	29138	63%	**37	93%
IMR 4198 👍	<<locked>>	93%	41176	89%	**69	100%
[Lovex D073.4]*	<<locked>>	95%	40727	88%	**85	93%
[Lovex D073.5]*	<<locked>>	97%	40785	88%	**01	93%
Lovex S053	<<locked>>	83%	41539	90%	**06	100%
Norma 200 👍	<<locked>>	91%	40350	87%	**95	99%
[Norma 202]*	<<locked>>	96%	32503	70%	**77	92%
[ReloadSwiss RS 40]*	<<locked>>	96%	41684	90%	**08	94%
[Rottweil R 901]*	<<locked>>	97%	36724	79%	**26	94%
SNPE Vectan BA6 1/2	<<locked>>	85%	40553	87%	**75	100%
SNPE Vectan SP 10	<<locked>>	92%	40698	88%	**15	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	36825	79%	**77	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	29776	64%	**46	92%
[Somchem S321]*	<<locked>>	96%	38508	83%	**78	92%
Somchem S335	<<locked>>	96%	34780	75%	**64	95%
Vihtavuori N120	<<locked>>	92%	41727	90%	**59	100%
Vihtavuori N130	<<locked>>	96%	39784	86%	**46	99%
Vihtavuori N133	<<locked>>	96%	33069	71%	**34	96%
[Vihtavuori N140]*	<<locked>>	97%	31256	67%	**24	92%
[Vihtavuori N530]*	<<locked>>	97%	39392	85%	**78	92%
[Winchester 748]*	<<locked>>	96%	38087	82%	**78	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	31879	69%	**41	100%
[ADI AR 2219]*	<<locked>>	81%	28108	61%	**65	91%
[Accurate 2015]*	<<locked>>	81%	23467	51%	**60	92%
[Accurate 2460]*	<<locked>>	90%	32155	69%	**54	90%
[Accurate 2495]*	<<locked>>	86%	20653	45%	**77	90%
[Alliant AR-Comp]*	<<locked>>	81%	21495	46%	**24	92%
Alliant Reloder-10x	<<locked>>	81%	26324	57%	**39	95%
Alliant Reloder-7	<<locked>>	81%	33808	73%	**37	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	29385	63%	**23	93%
[Hodgdon Benchmark]*	<<locked>>	91%	33910	73%	**28	90%
[Hodgdon CFE BLK]*	<<locked>>	84%	37086	80%	**41	90%
[Hodgdon H322]*	<<locked>>	84%	26919	58%	**32	90%
[Hodgdon H335]*	<<locked>>	83%	29283	63%	**95	90%
[Hodgdon H4198]*	<<locked>>	81%	32372	70%	**65	93%
[IMR 3031]*	<<locked>>	92%	25469	55%	**42	90%
IMR 4198	<<locked>>	81%	29138	63%	**46	97%
[Lovex D073.4]*	<<locked>>	89%	32996	71%	**51	90%
[Lovex D073.5]*	<<locked>>	91%	32779	71%	**64	90%
Lovex S053	<<locked>>	81%	38522	83%	**64	100%
Norma 200	<<locked>>	81%	29443	63%	**01	97%
[Norma 202]*	<<locked>>	92%	28601	62%	**91	90%
[ReloadSwiss RS 40]*	<<locked>>	88%	31676	68%	**28	90%
[Rottweil R 901]*	<<locked>>	88%	28137	61%	**55	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	36376	78%	**19	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	28355	61%	**75	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	89%	28616	62%	**19	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	93%	26934	58%	**80	90%
[Somchem S321]*	<<locked>>	93%	34795	75%	**10	90%
[Somchem S335]*	<<locked>>	86%	25469	55%	**73	90%
Vihtavuori N120	<<locked>>	81%	30298	65%	**75	100%
[Vihtavuori N130]*	<<locked>>	81%	25483	55%	**67	94%
[Vihtavuori N133]*	<<locked>>	83%	22974	50%	**95	91%
[Vihtavuori N140]*	<<locked>>	93%	28413	61%	**59	90%
[Vihtavuori N530]*	<<locked>>	94%	35447	76%	**10	90%
[Winchester 748]*	<<locked>>	93%	34780	75%	**16	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.