Load data for .30-30 Win. + .308 | 155gr | Brenneke TAG

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 155gr \| Brenneke TAG
Bullet Weight:	155gr \| 10.0g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.241" \| 31.5mm
Caliber:	.30-30 Win. load data
Case Length (l3):	2.039" \| 51.8mm
Cartridge Length (C.O.L.):	2.512" \| 63.8mm
Seated Depth:	0.768" \| 19.5mm
Shank Seated Depth:	0.650" \| 16.5mm
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B1174_C328
Last updated:	2025-01-01
Recommended Twist Rate:	1:12 - 1:10

Load data for 72 loads in caliber .30-30 Win. with .308 | 155gr | Brenneke TAG bullet and 36 powders such as Alliant AR-Comp, Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	89%	41727	90%	**21	100%
ADI AR 2219	<<locked>>	91%	40466	87%	**34	97%
Accurate 2015	<<locked>>	96%	38914	84%	**92	98%
[Accurate 2460]*	<<locked>>	96%	40872	88%	**21	94%
Accurate 2495	<<locked>>	96%	30066	65%	**29	96%
[Accurate 2520]*	<<locked>>	97%	34098	73%	**52	92%
Alliant AR-Comp 👍	<<locked>>	96%	34838	75%	**82	99%
Alliant Reloder-10x 👍	<<locked>>	94%	40886	88%	**34	99%
Alliant Reloder-7 👍	<<locked>>	86%	40799	88%	**75	99%
Baschieri & Pellagri 106	<<locked>>	91%	41249	89%	**59	97%
[Hodgdon Benchmark]*	<<locked>>	96%	40959	88%	**69	93%
[Hodgdon CFE BLK]*	<<locked>>	87%	41321	89%	**36	92%
Hodgdon H322	<<locked>>	96%	39044	84%	**08	96%
Hodgdon H335	<<locked>>	93%	41669	90%	**54	96%
Hodgdon H4198	<<locked>>	88%	41162	89%	**42	96%
[IMR 3031]*	<<locked>>	97%	30530	66%	**90	94%
IMR 4198 👍	<<locked>>	93%	41597	90%	**98	100%
[Lovex D073.4]*	<<locked>>	94%	40234	87%	**98	93%
[Lovex D073.5]*	<<locked>>	97%	41336	89%	**31	94%
Norma 200 👍	<<locked>>	91%	41771	90%	**38	100%
[Norma 202]*	<<locked>>	97%	33837	73%	**26	93%
[ReloadSwiss RS 40]*	<<locked>>	95%	41611	90%	**31	94%
[Rottweil R 901]*	<<locked>>	96%	37304	80%	**59	94%
SNPE Vectan BA6 1/2	<<locked>>	85%	40698	88%	**95	100%
SNPE Vectan SP 10	<<locked>>	92%	41089	89%	**44	96%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	37884	82%	**10	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	30545	66%	**82	93%
[Somchem S321]*	<<locked>>	97%	40422	87%	**34	93%
Somchem S335	<<locked>>	96%	35650	77%	**00	95%
Vihtavuori N120	<<locked>>	90%	41060	88%	**69	100%
Vihtavuori N130	<<locked>>	96%	40335	87%	**72	99%
Vihtavuori N133	<<locked>>	96%	33373	72%	**60	96%
[Vihtavuori N140]*	<<locked>>	96%	31444	68%	**47	92%
[Vihtavuori N530]*	<<locked>>	97%	40393	87%	**15	92%
[Vihtavuori N540]*	<<locked>>	97%	31821	69%	**77	92%
[Winchester 748]*	<<locked>>	97%	40074	86%	**38	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	32634	70%	**73	100%
[ADI AR 2219]*	<<locked>>	81%	29037	63%	**08	92%
[Accurate 2015]*	<<locked>>	81%	23989	52%	**90	93%
[Accurate 2460]*	<<locked>>	89%	32140	69%	**70	90%
[Accurate 2495]*	<<locked>>	84%	19986	43%	**70	90%
[Accurate 2520]*	<<locked>>	93%	29617	64%	**64	90%
[Alliant AR-Comp]*	<<locked>>	81%	21828	47%	**57	93%
Alliant Reloder-10x	<<locked>>	81%	26934	58%	**72	96%
Alliant Reloder-7	<<locked>>	81%	34389	74%	**70	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30226	65%	**62	94%
[Hodgdon Benchmark]*	<<locked>>	90%	33649	73%	**44	90%
[Hodgdon CFE BLK]*	<<locked>>	83%	36347	78%	**47	90%
[Hodgdon H322]*	<<locked>>	83%	26252	57%	**36	90%
[Hodgdon H335]*	<<locked>>	81%	28355	61%	**91	90%
[Hodgdon H4198]*	<<locked>>	81%	33707	73%	**14	94%
[IMR 3031]*	<<locked>>	90%	24990	54%	**49	90%
IMR 4198	<<locked>>	81%	29820	64%	**78	97%
[Lovex D073.4]*	<<locked>>	88%	32619	70%	**67	90%
[Lovex D073.5]*	<<locked>>	90%	32547	70%	**80	91%
Norma 200	<<locked>>	81%	30661	66%	**44	98%
[Norma 202]*	<<locked>>	90%	27963	60%	**98	90%
[ReloadSwiss RS 40]*	<<locked>>	86%	30908	67%	**34	90%
[Rottweil R 901]*	<<locked>>	86%	27833	60%	**62	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	36666	79%	**39	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	28848	62%	**08	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	87%	27746	60%	**16	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	91%	25860	56%	**73	90%
[Somchem S321]*	<<locked>>	92%	34476	74%	**26	90%
[Somchem S335]*	<<locked>>	86%	25672	55%	**96	91%
Vihtavuori N120	<<locked>>	81%	30893	67%	**08	100%
Vihtavuori N130	<<locked>>	81%	26049	56%	**00	95%
[Vihtavuori N133]*	<<locked>>	82%	22510	48%	**01	90%
[Vihtavuori N140]*	<<locked>>	92%	27746	60%	**62	90%
[Vihtavuori N530]*	<<locked>>	93%	35143	76%	**23	90%
[Vihtavuori N540]*	<<locked>>	94%	28906	62%	**14	90%
[Winchester 748]*	<<locked>>	92%	34069	73%	**23	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data