Load data for .30-30 Win. + .308 | 155gr | Berger BT Target

Recommended Powder(s): Alliant Reloder-10x, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 155gr \| Berger BT Target
Manufacturer SKU:	30409
Bullet Weight:	155gr \| 10.0g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.212" \| 30.8mm
Caliber:	.30-30 Win. load data
Case Length (l3):	2.039" \| 51.8mm
Cartridge Length (C.O.L.):	2.512" \| 63.8mm
Seated Depth:	0.739" \| 18.8mm
Shank Seated Depth:	0.585" \| 14.8mm
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B1059_C328
Last updated:	2025-01-01
Recommended Twist Rate:	1:12 - 1:10

Load data for 70 loads in caliber .30-30 Win. with .308 | 155gr | Berger BT Target bullet and 35 powders such as Alliant Reloder-10x, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	89%	41713	90%	**15	100%
ADI AR 2219	<<locked>>	91%	40408	87%	**24	96%
Accurate 2015	<<locked>>	97%	39030	84%	**92	98%
[Accurate 2460]*	<<locked>>	97%	41669	90%	**28	94%
Accurate 2495	<<locked>>	96%	29254	63%	**06	96%
Alliant AR-Comp	<<locked>>	97%	34563	74%	**72	99%
Alliant Reloder-10x 👍	<<locked>>	94%	40495	87%	**28	99%
Alliant Reloder-7	<<locked>>	87%	40582	87%	**69	99%
Baschieri & Pellagri 106	<<locked>>	91%	40683	88%	**42	97%
[Hodgdon Benchmark]*	<<locked>>	97%	41495	89%	**75	93%
[Hodgdon CFE BLK]*	<<locked>>	87%	41278	89%	**29	92%
Hodgdon H322	<<locked>>	96%	39189	84%	**05	96%
Hodgdon H335	<<locked>>	93%	41423	89%	**47	96%
Hodgdon H4198	<<locked>>	88%	40350	87%	**23	96%
[IMR 3031]*	<<locked>>	96%	29588	64%	**60	93%
IMR 4198 👍	<<locked>>	93%	41582	90%	**92	100%
[Lovex D073.4]*	<<locked>>	95%	41669	90%	**15	94%
[Lovex D073.5]*	<<locked>>	97%	41669	90%	**28	94%
Norma 200 👍	<<locked>>	91%	40857	88%	**18	100%
[Norma 202]*	<<locked>>	96%	32692	70%	**00	93%
[ReloadSwiss RS 40]*	<<locked>>	96%	41568	90%	**28	94%
[Rottweil R 901]*	<<locked>>	97%	37231	80%	**56	94%
SNPE Vectan BA6 1/2	<<locked>>	85%	40509	87%	**88	100%
SNPE Vectan SP 10	<<locked>>	92%	40828	88%	**38	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	97%	36927	80%	**93	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	97%	29994	65%	**65	92%
[Somchem S321]*	<<locked>>	97%	40118	86%	**18	92%
Somchem S335	<<locked>>	96%	34809	75%	**83	95%
Vihtavuori N120	<<locked>>	91%	41495	89%	**72	100%
Vihtavuori N130	<<locked>>	96%	40422	87%	**72	99%
Vihtavuori N133	<<locked>>	96%	33431	72%	**57	96%
[Vihtavuori N140]*	<<locked>>	96%	31401	68%	**41	92%
[Vihtavuori N530]*	<<locked>>	97%	39508	85%	**95	92%
[Vihtavuori N540]*	<<locked>>	97%	31314	67%	**64	92%
[Winchester 748]*	<<locked>>	97%	39349	85%	**18	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	32518	70%	**67	100%
[ADI AR 2219]*	<<locked>>	81%	29051	63%	**05	92%
[Accurate 2015]*	<<locked>>	81%	23931	52%	**86	93%
[Accurate 2460]*	<<locked>>	90%	32503	70%	**73	90%
[Accurate 2495]*	<<locked>>	85%	20305	44%	**80	90%
[Alliant AR-Comp]*	<<locked>>	81%	21814	47%	**50	93%
Alliant Reloder-10x	<<locked>>	81%	26701	58%	**62	95%
Alliant Reloder-7	<<locked>>	81%	34330	74%	**64	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	29704	64%	**46	93%
[Hodgdon Benchmark]*	<<locked>>	91%	34084	73%	**47	90%
[Hodgdon CFE BLK]*	<<locked>>	83%	36245	78%	**44	90%
[Hodgdon H322]*	<<locked>>	83%	26237	57%	**32	90%
[Hodgdon H335]*	<<locked>>	82%	29051	63%	**05	90%
[Hodgdon H4198]*	<<locked>>	81%	32909	71%	**91	93%
[IMR 3031]*	<<locked>>	90%	25019	54%	**42	90%
IMR 4198	<<locked>>	81%	29718	64%	**72	97%
[Lovex D073.4]*	<<locked>>	88%	32561	70%	**60	90%
[Lovex D073.5]*	<<locked>>	90%	32503	70%	**73	90%
Norma 200	<<locked>>	81%	29950	65%	**24	97%
[Norma 202]*	<<locked>>	91%	27876	60%	**91	90%
[ReloadSwiss RS 40]*	<<locked>>	86%	30951	67%	**28	90%
[Rottweil R 901]*	<<locked>>	88%	28456	61%	**78	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	36448	79%	**32	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	28558	62%	**98	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	28137	61%	**23	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	26237	57%	**77	90%
[Somchem S321]*	<<locked>>	93%	35027	75%	**33	90%
[Somchem S335]*	<<locked>>	86%	26034	56%	**00	91%
Vihtavuori N120	<<locked>>	81%	30168	65%	**88	100%
[Vihtavuori N130]*	<<locked>>	81%	25831	56%	**90	94%
[Vihtavuori N133]*	<<locked>>	82%	22452	48%	**95	90%
[Vihtavuori N140]*	<<locked>>	92%	27514	59%	**52	90%
[Vihtavuori N530]*	<<locked>>	93%	35868	77%	**29	90%
[Vihtavuori N540]*	<<locked>>	93%	28572	62%	**01	90%
[Winchester 748]*	<<locked>>	93%	34592	75%	**26	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data