Load data for .30-30 Win. + .308 | 150gr | Woodleigh HS

.30-30 Win. cartridge drawing
Woodleigh logo

Load Specifications

Bullet Manufacturer:Woodleigh
Bullet Weight:150 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.039"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:45 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:15.5

Load data in caliber .30-30 Win. with .308 | 150gr | Woodleigh HS bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, ADI AR 2219 and Alliant Reloder-10x.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%41,959 psi90%2228 fps99.4%
Accurate 2015<<locked>>98%40,364 psi87%2280 fps98.6%
Accurate 2495ᴾ<<locked>>100%31,256 psi67%2198 fps97%
Accurate LT-30<<locked>>88%40,451 psi87%2192 fps97.1%
ADI AR 2207<<locked>>88%41,858 psi90%2290 fps100%
ADI AR 2219<<locked>>90%39,856 psi86%2297 fps96.8%
Alliant AR-Compᴾ<<locked>>100%40,045 psi86%2346 fps99.9%
Alliant Reloder-10x<<locked>>94%41,698 psi90%2320 fps99.5%
Alliant Reloder-7<<locked>>86%40,828 psi88%2247 fps99.6%
Baschieri & Pellagri 106<<locked>>90%40,886 psi88%2221 fps97.5%
Hodgdon H322<<locked>>94%41,118 psi89%2320 fps97.1%
Hodgdon H335<<locked>>94%41,582 psi90%2326 fps96.2%
Hodgdon H4198<<locked>>84%39,610 psi85%2188 fps96.2%
Hodgdon TrailBossᴾ<<locked>>100%30,792 psi66%1430 fps100%
IMR 3031ᴾ<<locked>>100%37,826 psi82%2316 fps97.2%
IMR 4198<<locked>>92%41,553 psi90%2270 fps99.8%
Lovex S053<<locked>>82%41,321 psi89%2192 fps100%
Norma 200<<locked>>90%41,858 psi90%2306 fps99.8%
ReloadSwiss RS 14ᴾ<<locked>>100%30,879 psi67%1473 fps100%
ReloadSwiss RS 36<<locked>>82%41,814 psi90%2251 fps100%
SNPE Vectan BA6 1/2<<locked>>84%40,828 psi88%2060 fps100%
SNPE Vectan SP 3<<locked>>92%40,016 psi86%2274 fps97.8%
Somchem S335ᴾ<<locked>>100%40,814 psi88%2257 fps96.9%
Vihtavuori N120<<locked>>86%39,523 psi85%2218 fps100%
Vihtavuori N130<<locked>>94%40,103 psi86%2238 fps99.1%
Vihtavuori N133ᴾ<<locked>>100%41,684 psi90%2267 fps98.6%
Vihtavuori N135ᴾ<<locked>>100%34,098 psi73%2218 fps97.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%36,796 psi79%2146 fps98.6%
Accurate 2015<<locked>>88%29,486 psi64%2080 fps95.6%
Accurate 2495<<locked>>96%27,369 psi59%2116 fps95.5%
Accurate LT-30<<locked>>82%33,750 psi73%2073 fps95.1%
ADI AR 2207<<locked>>80%32,430 psi70%2133 fps99.9%
ADI AR 221927.8 gr86%34,969 psi75%2205 fps95.3%
Alliant AR-Comp<<locked>>84%24,439 psi53%2001 fps95.5%
Alliant Reloder-10x23.6 gr80%26,861 psi58%2031 fps95.8%
Alliant Reloder-7<<locked>>80%33,997 psi73%2129 fps98.5%
Baschieri & Pellagri 106<<locked>>84%33,866 psi73%2100 fps95.6%
Hodgdon H32228.1 gr90%36,085 psi78%2228 fps95.7%
Hodgdon H335<<locked>>92%39,247 psi85%2287 fps95.5%
Hodgdon H4198<<locked>>82%37,289 psi80%2149 fps95.5%
Hodgdon TrailBoss<<locked>>80%22,597 psi49%1280 fps100%
IMR 3031<<locked>>96%33,489 psi72%2228 fps95.7%
IMR 4198<<locked>>80%29,660 psi64%2044 fps97.6%
Lovex S053<<locked>>80%39,276 psi85%2159 fps100%
Norma 200<<locked>>80%30,472 psi66%2103 fps97.9%
ReloadSwiss RS 14<<locked>>80%22,495 psi48%1312 fps100%
ReloadSwiss RS 36<<locked>>80%39,363 psi85%2211 fps99.9%
SNPE Vectan BA6 1/2<<locked>>80%36,782 psi79%2005 fps100%
SNPE Vectan SP 3<<locked>>84%31,633 psi68%2113 fps95.2%
Somchem S335<<locked>>96%36,187 psi78%2178 fps95.6%
Vihtavuori N120<<locked>>80%32,590 psi70%2106 fps100%
Vihtavuori N130<<locked>>80%26,324 psi57%1965 fps95.1%
Vihtavuori N133<<locked>>88%29,385 psi63%2037 fps95%
Vihtavuori N135<<locked>>94%28,398 psi61%2093 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .30-30 Win. loaded with the .308 | 150gr | Woodleigh HS. Alliant AR-Comp delivers the highest muzzle velocity at 2,346 fps; across all powders the maximum-charge window runs from 1,430 fps to 2,346 fps. Accurate 2495 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 66–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.308" calls for a 1:15.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, ADI AR 2219, Alliant Reloder-10x rank at the top here: for .30-30 Win. with the .308 | 150gr | Woodleigh HS they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data