Load data for .30-30 Win. + .308 | 150gr | Speer BT FMJ

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Speer BT FMJ
Manufacturer SKU:	2018
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.170" \| 29.7mm
Caliber:	.30-30 Win. load data
Case Length (l3):	2.039" \| 51.8mm
Cartridge Length (C.O.L.):	2.512" \| 63.8mm
Seated Depth:	0.697" \| 17.7mm
Shank Seated Depth:	0.520" \| 13.2mm
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B6146_C328
Last updated:	2025-02-02
Recommended Twist Rate:	1:13 - 1:11

Load data for 68 loads in caliber .30-30 Win. with .308 | 150gr | Speer BT FMJ bullet and 34 powders such as Alliant AR-Comp, Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	89%	41176	89%	**60	100%
ADI AR 2219	<<locked>>	92%	41466	89%	**93	97%
Accurate 2015	<<locked>>	96%	38798	84%	**34	98%
[Accurate 2460]*	<<locked>>	96%	41539	90%	**77	94%
Accurate 2495	<<locked>>	97%	30095	65%	**72	96%
[Accurate 2520]*	<<locked>>	97%	33576	72%	**85	92%
Alliant AR-Comp 👍	<<locked>>	97%	35056	76%	**31	99%
Alliant Reloder-10x 👍	<<locked>>	94%	40698	88%	**80	99%
Alliant Reloder-7 👍	<<locked>>	87%	41321	89%	**28	99%
Baschieri & Pellagri 106	<<locked>>	91%	40930	88%	**95	97%
[Hodgdon Benchmark]*	<<locked>>	97%	41089	89%	**15	93%
[Hodgdon CFE BLK]*	<<locked>>	87%	41031	88%	**75	92%
Hodgdon H322	<<locked>>	97%	40074	86%	**74	96%
Hodgdon H335	<<locked>>	92%	40944	88%	**90	95%
Hodgdon H4198	<<locked>>	88%	40495	87%	**78	96%
[IMR 3031]*	<<locked>>	96%	29849	64%	**16	93%
IMR 4198 👍	<<locked>>	92%	41089	89%	**34	100%
[Lovex D073.4]*	<<locked>>	94%	41046	88%	**57	93%
[Lovex D073.5]*	<<locked>>	96%	40596	87%	**64	93%
Norma 200 👍	<<locked>>	90%	40843	88%	**67	100%
[Norma 202]*	<<locked>>	97%	33837	73%	**65	93%
[ReloadSwiss RS 40]*	<<locked>>	95%	41278	89%	**70	94%
[Rottweil R 901]*	<<locked>>	96%	37014	80%	**95	94%
SNPE Vectan BA6 1/2	<<locked>>	85%	40422	87%	**34	100%
SNPE Vectan SP 10	<<locked>>	91%	40538	87%	**77	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	36753	79%	**36	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	29849	64%	**08	92%
[Somchem S321]*	<<locked>>	96%	40030	86%	**67	92%
Somchem S335	<<locked>>	97%	35839	77%	**46	95%
Vihtavuori N120	<<locked>>	91%	41626	90%	**24	100%
Vihtavuori N130	<<locked>>	96%	40770	88%	**21	99%
Vihtavuori N133	<<locked>>	97%	33982	73%	**10	96%
[Vihtavuori N140]*	<<locked>>	97%	32271	70%	**03	92%
[Winchester 748]*	<<locked>>	96%	39711	86%	**74	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	32242	69%	**10	100%
[ADI AR 2219]*	<<locked>>	81%	29095	63%	**47	92%
[Accurate 2015]*	<<locked>>	81%	23989	52%	**32	93%
[Accurate 2460]*	<<locked>>	90%	32634	70%	**19	90%
[Accurate 2495]*	<<locked>>	85%	20378	44%	**23	90%
[Accurate 2520]*	<<locked>>	94%	30342	65%	**19	90%
[Alliant AR-Comp]*	<<locked>>	81%	21625	47%	**86	93%
Alliant Reloder-10x	<<locked>>	81%	26963	58%	**11	95%
Alliant Reloder-7	<<locked>>	81%	33910	73%	**00	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30153	65%	**98	93%
[Hodgdon Benchmark]*	<<locked>>	90%	34040	73%	**90	90%
[Hodgdon CFE BLK]*	<<locked>>	84%	37362	81%	**10	90%
[Hodgdon H322]*	<<locked>>	83%	26426	57%	**78	90%
[Hodgdon H335]*	<<locked>>	82%	29008	62%	**47	90%
[Hodgdon H4198]*	<<locked>>	81%	33199	72%	**44	93%
[IMR 3031]*	<<locked>>	91%	25628	55%	**01	90%
IMR 4198	<<locked>>	81%	29472	64%	**14	97%
[Lovex D073.4]*	<<locked>>	89%	33402	72%	**23	90%
[Lovex D073.5]*	<<locked>>	90%	32256	69%	**16	90%
Norma 200	<<locked>>	81%	30284	65%	**77	97%
[Norma 202]*	<<locked>>	91%	28631	62%	**54	90%
[ReloadSwiss RS 40]*	<<locked>>	87%	31807	69%	**93	90%
[Rottweil R 901]*	<<locked>>	88%	28529	61%	**21	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	36521	79%	**82	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	28819	62%	**44	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	28239	61%	**65	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	26295	57%	**23	90%
[Somchem S321]*	<<locked>>	93%	35389	76%	**82	90%
[Somchem S335]*	<<locked>>	86%	26063	56%	**42	90%
Vihtavuori N120	<<locked>>	81%	30603	66%	**44	100%
[Vihtavuori N130]*	<<locked>>	81%	25599	55%	**26	94%
[Vihtavuori N133]*	<<locked>>	82%	22394	48%	**34	90%
[Vihtavuori N140]*	<<locked>>	93%	28326	61%	**18	90%
[Winchester 748]*	<<locked>>	93%	34911	75%	**82	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data