Load data for .30-30 Win. + .308 | 150gr | Nosler Partition SP

Recommended Powder(s): Accurate 2015, Alliant Reloder-10x, IMR 4198, Norma 200, Vihtavuori N130

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Nosler Partition SP
Manufacturer SKU:	16329
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.100" \| 27.9mm
Caliber:	.30-30 Win. load data
Case Length (l3):	2.039" \| 51.8mm
Cartridge Length (C.O.L.):	2.512" \| 63.8mm
Seated Depth:	0.627" \| 15.9mm
Shank Seated Depth:	0.627" \| 15.9mm
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B4088_C328
Last updated:	2025-01-01

Load data for 76 loads in caliber .30-30 Win. with .308 | 150gr | Nosler Partition SP bullet and 38 powders such as Accurate 2015, Alliant Reloder-10x, IMR 4198, Norma 200, Vihtavuori N130. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
Muzzle velocity vs. barrel length
Every 1 inch additional barrel length increases muzzle velocity by approx. 20.1 fps
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	87%	40553	87%	**54	100%
ADI AR 2219	<<locked>>	91%	40727	88%	**90	97%
Accurate 2015 👍	<<locked>>	97%	40698	88%	**74	99%
[Accurate 2230]*	<<locked>>	95%	41597	90%	**60	92%
[Accurate 2460]*	<<locked>>	96%	41713	90%	**90	94%
Accurate 2495	<<locked>>	96%	30806	66%	**95	96%
[Accurate 2520]*	<<locked>>	96%	33982	73%	**01	92%
Alliant AR-Comp	<<locked>>	96%	35288	76%	**44	99%
Alliant Reloder-10x 👍	<<locked>>	94%	41191	89%	**93	99%
Alliant Reloder-7	<<locked>>	86%	40611	87%	**24	99%
Baschieri & Pellagri 106	<<locked>>	90%	41365	89%	**11	97%
[Hodgdon Benchmark]*	<<locked>>	96%	41727	90%	**38	93%
[Hodgdon CFE BLK]*	<<locked>>	86%	41278	89%	**88	92%
Hodgdon H322	<<locked>>	97%	40727	88%	**90	97%
Hodgdon H335	<<locked>>	92%	41191	89%	**00	96%
Hodgdon H4198	<<locked>>	88%	41060	88%	**98	96%
[IMR 3031]*	<<locked>>	96%	30472	66%	**39	94%
IMR 4198 👍	<<locked>>	92%	41684	90%	**54	100%
[Lovex D073.4]*	<<locked>>	94%	41553	90%	**70	94%
[Lovex D073.5]*	<<locked>>	96%	41060	88%	**80	94%
Norma 200 👍	<<locked>>	90%	41568	90%	**83	100%
[Norma 202]*	<<locked>>	96%	34011	73%	**82	93%
[ReloadSwiss RS 40]*	<<locked>>	95%	41669	90%	**83	94%
[Rottweil R 901]*	<<locked>>	96%	37739	81%	**15	94%
SNPE Vectan BA6 1/2	<<locked>>	85%	41394	89%	**54	100%
SNPE Vectan SP 10	<<locked>>	92%	41698	90%	**10	96%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	37521	81%	**56	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	30211	65%	**24	93%
[Somchem S321]*	<<locked>>	97%	41582	90%	**06	93%
Somchem S335	<<locked>>	96%	36245	78%	**65	95%
Vihtavuori N120	<<locked>>	90%	41017	88%	**24	100%
Vihtavuori N130 👍	<<locked>>	96%	41394	89%	**44	99%
Vihtavuori N133	<<locked>>	96%	34330	74%	**26	97%
[Vihtavuori N135]*	<<locked>>	97%	25773	56%	**95	92%
[Vihtavuori N140]*	<<locked>>	97%	32605	70%	**23	93%
[Vihtavuori N530]*	<<locked>>	96%	40176	87%	**67	92%
[Vihtavuori N540]*	<<locked>>	97%	32242	69%	**39	92%
[Winchester 748]*	<<locked>>	97%	40915	88%	**06	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	33040	71%	**29	100%
[ADI AR 2219]*	<<locked>>	81%	29501	64%	**67	92%
[Accurate 2015]*	<<locked>>	81%	24584	53%	**52	93%
[Accurate 2230]*	<<locked>>	92%	37579	81%	**92	90%
[Accurate 2460]*	<<locked>>	89%	32053	69%	**19	90%
[Accurate 2495]*	<<locked>>	84%	20262	44%	**19	90%
[Accurate 2520]*	<<locked>>	92%	29762	64%	**10	90%
[Alliant AR-Comp]*	<<locked>>	81%	21930	47%	**06	93%
Alliant Reloder-10x	<<locked>>	81%	27644	60%	**37	96%
Alliant Reloder-7	<<locked>>	81%	34577	75%	**23	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30472	66%	**14	94%
[Hodgdon Benchmark]*	<<locked>>	89%	33547	72%	**90	90%
[Hodgdon CFE BLK]*	<<locked>>	82%	35679	77%	**87	90%
[Hodgdon H322]*	<<locked>>	82%	26107	56%	**78	90%
[Hodgdon H335]*	<<locked>>	81%	28529	61%	**44	90%
[Hodgdon H4198]*	<<locked>>	81%	33852	73%	**64	94%
[IMR 3031]*	<<locked>>	90%	25092	54%	**98	90%
IMR 4198	<<locked>>	81%	30168	65%	**37	97%
[Lovex D073.4]*	<<locked>>	87%	32866	71%	**19	90%
[Lovex D073.5]*	<<locked>>	88%	31691	68%	**10	90%
Norma 200	<<locked>>	81%	30951	67%	**00	98%
[Norma 202]*	<<locked>>	89%	27528	59%	**34	90%
[ReloadSwiss RS 40]*	<<locked>>	86%	31488	68%	**93	90%
[Rottweil R 901]*	<<locked>>	86%	28311	61%	**21	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	37550	81%	**01	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	29631	64%	**70	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	86%	27673	60%	**65	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	26701	58%	**39	91%
[Somchem S321]*	<<locked>>	91%	34403	74%	**75	90%
[Somchem S335]*	<<locked>>	85%	25657	55%	**39	90%
Vihtavuori N120	<<locked>>	81%	31401	68%	**67	100%
Vihtavuori N130	<<locked>>	81%	26223	56%	**49	95%
[Vihtavuori N133]*	<<locked>>	81%	22046	48%	**31	90%
[Vihtavuori N135]*	<<locked>>	93%	23554	51%	**32	90%
[Vihtavuori N140]*	<<locked>>	92%	27978	60%	**18	90%
[Vihtavuori N530]*	<<locked>>	92%	35244	76%	**75	90%
[Vihtavuori N540]*	<<locked>>	93%	28776	62%	**54	90%
[Winchester 748]*	<<locked>>	91%	34171	74%	**75	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.