Load data for .30-30 Win. + .308 | 150gr | Nosler Expansion Tip RN

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Nosler Expansion Tip RN
Manufacturer SKU:	59451
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30-30 Win. load data
Case Length (l3):	2.039" \| 51.8mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B4086_C328
Last updated:	2026-02-03
Recommended Twist Rate:	1:13 - 1:11

Load data for 72 loads in caliber .30-30 Win. with .308 | 150gr | Nosler Expansion Tip RN bullet and 36 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	88%	40785	88%	**41	100%
ADI AR 2219	<<locked>>	91%	40654	88%	**67	96%
Accurate 2015	<<locked>>	96%	39320	85%	**34	98%
[Accurate 2460]*	<<locked>>	95%	40799	88%	**54	93%
Accurate 2495	<<locked>>	97%	31879	69%	**95	96%
[Accurate 2520]*	<<locked>>	97%	34650	75%	**95	92%
Alliant AR-Comp 👍	<<locked>>	97%	35940	77%	**38	99%
Alliant Reloder-10x 👍	<<locked>>	94%	41176	89%	**74	99%
Alliant Reloder-7 👍	<<locked>>	86%	41234	89%	**15	99%
Baschieri & Pellagri 106	<<locked>>	91%	41350	89%	**88	97%
[Hodgdon Benchmark]*	<<locked>>	96%	41147	89%	**05	93%
[Hodgdon CFE BLK]*	<<locked>>	86%	41002	88%	**59	92%
Hodgdon H322	<<locked>>	96%	40059	86%	**57	96%
Hodgdon H335	<<locked>>	92%	40886	88%	**74	95%
Hodgdon H4198	<<locked>>	88%	41379	89%	**78	96%
[IMR 3031]*	<<locked>>	96%	30966	67%	**26	94%
IMR 4198 👍	<<locked>>	91%	40582	87%	**18	99%
[Lovex D073.4]*	<<locked>>	93%	40466	87%	**31	93%
[Lovex D073.5]*	<<locked>>	96%	40799	88%	**54	93%
Norma 200 👍	<<locked>>	90%	40785	88%	**54	99%
[Norma 202]*	<<locked>>	97%	34722	75%	**72	93%
[ReloadSwiss RS 40]*	<<locked>>	95%	41698	90%	**67	94%
[Rottweil R 901]*	<<locked>>	96%	38014	82%	**98	94%
SNPE Vectan BA6 1/2	<<locked>>	85%	41249	89%	**34	100%
SNPE Vectan SP 10	<<locked>>	92%	41756	90%	**87	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	38130	82%	**46	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	30763	66%	**11	92%
[Somchem S321]*	<<locked>>	96%	40886	88%	**67	92%
Somchem S335	<<locked>>	97%	36999	80%	**56	95%
Vihtavuori N120	<<locked>>	90%	41263	89%	**08	100%
Vihtavuori N130	<<locked>>	95%	40611	88%	**11	99%
Vihtavuori N133	<<locked>>	97%	34925	75%	**16	96%
[Vihtavuori N140]*	<<locked>>	97%	32822	71%	**00	93%
[Vihtavuori N530]*	<<locked>>	96%	40524	87%	**47	92%
[Vihtavuori N540]*	<<locked>>	96%	32126	69%	**13	92%
[Winchester 748]*	<<locked>>	96%	40045	86%	**67	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	33330	72%	**16	100%
[ADI AR 2219]*	<<locked>>	81%	29544	64%	**44	92%
[Accurate 2015]*	<<locked>>	81%	24903	54%	**32	93%
[Accurate 2460]*	<<locked>>	90%	33707	73%	**29	91%
[Accurate 2495]*	<<locked>>	84%	21045	45%	**23	90%
[Accurate 2520]*	<<locked>>	93%	30632	66%	**10	90%
[Alliant AR-Comp]*	<<locked>>	81%	22626	49%	**03	93%
Alliant Reloder-10x	<<locked>>	81%	27572	59%	**14	95%
Alliant Reloder-7	<<locked>>	81%	35085	76%	**10	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30530	66%	**95	93%
[Hodgdon Benchmark]*	<<locked>>	91%	35186	76%	**00	90%
[Hodgdon CFE BLK]*	<<locked>>	83%	37246	80%	**96	90%
[Hodgdon H322]*	<<locked>>	82%	26643	57%	**69	90%
[Hodgdon H335]*	<<locked>>	81%	29095	63%	**37	90%
[Hodgdon H4198]*	<<locked>>	81%	34243	74%	**51	94%
[IMR 3031]*	<<locked>>	90%	25614	55%	**85	90%
IMR 4198	<<locked>>	81%	30371	65%	**18	97%
[Lovex D073.4]*	<<locked>>	88%	33214	72%	**06	90%
[Lovex D073.5]*	<<locked>>	90%	33707	73%	**29	91%
Norma 200	<<locked>>	81%	31502	68%	**90	98%
[Norma 202]*	<<locked>>	91%	28877	62%	**44	90%
[ReloadSwiss RS 40]*	<<locked>>	86%	31575	68%	**70	90%
[Rottweil R 901]*	<<locked>>	86%	28776	62%	**08	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	37420	81%	**82	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	29617	64%	**51	91%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	29037	63%	**72	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	27253	59%	**32	90%
[Somchem S321]*	<<locked>>	92%	35853	77%	**78	90%
[Somchem S335]*	<<locked>>	85%	26150	56%	**29	90%
Vihtavuori N120	<<locked>>	81%	31618	68%	**51	100%
Vihtavuori N130	<<locked>>	81%	26672	57%	**39	95%
[Vihtavuori N133]*	<<locked>>	82%	23206	50%	**44	90%
[Vihtavuori N140]*	<<locked>>	91%	28152	61%	**98	90%
[Vihtavuori N530]*	<<locked>>	93%	36463	79%	**75	90%
[Vihtavuori N540]*	<<locked>>	93%	29428	63%	**51	90%
[Winchester 748]*	<<locked>>	92%	35375	76%	**78	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data