Load data for .30-30 Win. + .308 | 150gr | Berger Target FB

Recommended Powder(s): Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200, Vihtavuori N130

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Berger Target FB
Manufacturer SKU:	30407
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.155" \| 29.3mm
Caliber:	.30-30 Win. load data
Case Length (l3):	2.039" \| 51.8mm
Cartridge Length (C.O.L.):	2.512" \| 63.8mm
Seated Depth:	0.682" \| 17.3mm
Shank Seated Depth:	0.682" \| 17.3mm
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B1058_C328
Last updated:	2025-01-01

Load data for 68 loads in caliber .30-30 Win. with .308 | 150gr | Berger Target FB bullet and 34 powders such as Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200, Vihtavuori N130. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	89%	41278	89%	**54	100%
ADI AR 2219	<<locked>>	92%	41234	89%	**80	96%
Accurate 2015	<<locked>>	96%	38218	82%	**21	98%
[Accurate 2460]*	<<locked>>	97%	40959	88%	**60	93%
Accurate 2495	<<locked>>	97%	29820	64%	**59	96%
Alliant AR-Comp	<<locked>>	96%	34272	74%	**08	99%
Alliant Reloder-10x 👍	<<locked>>	95%	41379	89%	**87	99%
Alliant Reloder-7 👍	<<locked>>	88%	41510	89%	**24	99%
Baschieri & Pellagri 106	<<locked>>	91%	40582	87%	**82	97%
[Hodgdon Benchmark]*	<<locked>>	97%	40872	88%	**08	93%
[Hodgdon CFE BLK]*	<<locked>>	87%	40785	88%	**59	92%
Hodgdon H322	<<locked>>	96%	38435	83%	**38	96%
Hodgdon H335	<<locked>>	93%	40843	88%	**77	95%
Hodgdon H4198	<<locked>>	89%	41423	89%	**82	96%
[IMR 3031]*	<<locked>>	97%	29907	64%	**10	93%
IMR 4198 👍	<<locked>>	93%	41205	89%	**31	100%
[Lovex D073.4]*	<<locked>>	95%	40915	88%	**47	93%
[Lovex D073.5]*	<<locked>>	97%	40524	87%	**57	93%
Norma 200 👍	<<locked>>	91%	41655	90%	**77	100%
[Norma 202]*	<<locked>>	97%	33228	72%	**49	93%
ReloadSwiss RS 36	<<locked>>	83%	41379	89%	**15	100%
[ReloadSwiss RS 40]*	<<locked>>	95%	40843	88%	**57	94%
[Rottweil R 901]*	<<locked>>	96%	36477	79%	**78	94%
SNPE Vectan BA6 1/2	<<locked>>	85%	40524	87%	**31	100%
SNPE Vectan SP 10	<<locked>>	93%	41713	90%	**90	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	36448	79%	**23	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	29646	64%	**95	92%
[Somchem S321]*	<<locked>>	97%	39972	86%	**57	92%
Somchem S335	<<locked>>	97%	35389	76%	**36	95%
Vihtavuori N120	<<locked>>	91%	41075	88%	**08	100%
Vihtavuori N130 👍	<<locked>>	97%	41249	89%	**24	99%
Vihtavuori N133	<<locked>>	97%	33663	73%	**96	96%
[Vihtavuori N140]*	<<locked>>	96%	30937	67%	**70	92%
[Winchester 748]*	<<locked>>	97%	39218	84%	**57	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	32416	70%	**06	100%
[ADI AR 2219]*	<<locked>>	81%	28747	62%	**34	91%
[Accurate 2015]*	<<locked>>	81%	23815	51%	**16	92%
[Accurate 2460]*	<<locked>>	90%	32430	70%	**13	90%
[Accurate 2495]*	<<locked>>	86%	20885	45%	**29	90%
[Alliant AR-Comp]*	<<locked>>	81%	21712	47%	**83	92%
Alliant Reloder-10x	<<locked>>	81%	26440	57%	**95	95%
Alliant Reloder-7	<<locked>>	81%	34156	74%	**96	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	29907	64%	**85	93%
[Hodgdon Benchmark]*	<<locked>>	91%	34780	75%	**96	90%
[Hodgdon CFE BLK]*	<<locked>>	84%	37072	80%	**00	90%
[Hodgdon H322]*	<<locked>>	84%	26992	58%	**85	90%
[Hodgdon H335]*	<<locked>>	83%	29689	64%	**57	90%
[Hodgdon H4198]*	<<locked>>	81%	32851	71%	**31	93%
[IMR 3031]*	<<locked>>	91%	25643	55%	**95	90%
IMR 4198	<<locked>>	81%	29602	64%	**11	97%
[Lovex D073.4]*	<<locked>>	89%	33185	71%	**13	90%
[Lovex D073.5]*	<<locked>>	91%	32822	71%	**19	90%
Norma 200	<<locked>>	81%	29747	64%	**60	97%
[Norma 202]*	<<locked>>	92%	28369	61%	**37	90%
ReloadSwiss RS 36	<<locked>>	81%	38653	83%	**72	100%
[ReloadSwiss RS 40]*	<<locked>>	87%	31517	68%	**80	90%
[Rottweil R 901]*	<<locked>>	89%	29022	63%	**28	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	36564	79%	**75	100%
[SNPE Vectan SP 10]*	<<locked>>	82%	29283	63%	**47	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	89%	28747	62%	**75	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	93%	26803	58%	**29	90%
[Somchem S321]*	<<locked>>	94%	36129	78%	**92	91%
[Somchem S335]*	<<locked>>	86%	25715	55%	**29	90%
Vihtavuori N120	<<locked>>	81%	30008	65%	**28	100%
[Vihtavuori N130]*	<<locked>>	81%	25614	55%	**26	94%
[Vihtavuori N133]*	<<locked>>	83%	22742	49%	**41	90%
[Vihtavuori N140]*	<<locked>>	93%	28108	61%	**05	90%
[Winchester 748]*	<<locked>>	94%	35824	77%	**92	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data