Load data for .30-30 Win. + .308 | 140gr | Nosler Custom Competition

.30-30 Win. cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:140 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.039"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:45 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:16.5

Load data in caliber .30-30 Win. with .308 | 140gr | Nosler Custom Competition bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, SNPE Vectan SP 3 and IMR 4198.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%41,669 psi90%2320 fps99.1%
Accurate 2015<<locked>>98%40,030 psi86%2372 fps98.2%
Accurate 2495ᴾ<<locked>>100%30,719 psi66%2277 fps96.3%
Accurate LT-30<<locked>>88%40,335 psi87%2283 fps96.7%
ADI AR 2207<<locked>>88%41,002 psi88%2375 fps100%
ADI AR 2219<<locked>>90%39,291 psi85%2379 fps96.2%
Alliant AR-Compᴾ<<locked>>100%39,595 psi85%2434 fps99.8%
Alliant Reloder-10x<<locked>>94%41,292 psi89%2411 fps99.2%
Alliant Reloder-7<<locked>>86%40,785 psi88%2343 fps99.4%
Baschieri & Pellagri 106<<locked>>90%40,524 psi87%2306 fps97.1%
Hodgdon H322<<locked>>94%40,901 psi88%2408 fps96.6%
Hodgdon H4198<<locked>>86%41,713 psi90%2316 fps96.4%
Hodgdon TrailBossᴾ<<locked>>100%30,690 psi66%1503 fps100%
IMR 3031ᴾ<<locked>>100%37,768 psi81%2405 fps96.7%
IMR 4198<<locked>>92%41,162 psi89%2359 fps99.6%
Lovex S053<<locked>>82%41,060 psi88%2283 fps100%
Norma 200<<locked>>90%41,089 psi89%2392 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%30,719 psi66%1542 fps100%
ReloadSwiss RS 36<<locked>>82%41,133 psi89%2339 fps100%
SNPE Vectan BA6 1/2<<locked>>84%40,437 psi87%2149 fps100%
SNPE Vectan SP 3<<locked>>92%39,726 psi86%2362 fps97.3%
Somchem S335ᴾ<<locked>>100%40,277 psi87%2339 fps96.4%
Vihtavuori N120<<locked>>88%41,176 psi89%2339 fps100%
Vihtavuori N130<<locked>>94%39,755 psi86%2326 fps98.8%
Vihtavuori N133ᴾ<<locked>>100%41,437 psi89%2356 fps98.2%
Vihtavuori N135ᴾ<<locked>>100%33,794 psi73%2300 fps96.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%36,448 psi79%2228 fps98.2%
Accurate 2015<<locked>>88%29,341 psi63%2162 fps95%
Accurate 2495<<locked>>98%28,834 psi62%2234 fps95.6%
Accurate LT-30<<locked>>84%35,607 psi77%2198 fps95.3%
ADI AR 2207<<locked>>80%32,039 psi69%2218 fps99.7%
ADI AR 2219<<locked>>88%37,115 psi80%2339 fps95.5%
Alliant AR-Comp<<locked>>86%25,846 psi56%2126 fps95.8%
Alliant Reloder-10x24.7 gr80%26,469 psi57%2106 fps95.1%
Alliant Reloder-7<<locked>>80%33,881 psi73%2215 fps98.1%
Baschieri & Pellagri 106<<locked>>84%33,475 psi72%2178 fps95%
Hodgdon H322<<locked>>90%36,013 psi78%2316 fps95.1%
Hodgdon H4198<<locked>>82%37,115 psi80%2234 fps95%
Hodgdon TrailBoss<<locked>>80%22,510 psi49%1342 fps100%
IMR 3031<<locked>>96%33,315 psi72%2313 fps95.1%
IMR 419823.5 gr80%29,196 psi63%2119 fps97%
Lovex S053<<locked>>80%38,711 psi83%2247 fps100%
Norma 200<<locked>>80%29,965 psi65%2178 fps97.4%
ReloadSwiss RS 14<<locked>>80%22,379 psi48%1378 fps100%
ReloadSwiss RS 36<<locked>>80%38,783 psi84%2300 fps99.8%
SNPE Vectan BA6 1/2<<locked>>80%36,172 psi78%2087 fps100%
SNPE Vectan SP 326.6 gr86%32,982 psi71%2231 fps95.2%
Somchem S335<<locked>>96%35,984 psi78%2264 fps95.1%
Vihtavuori N120<<locked>>80%32,271 psi70%2192 fps100%
Vihtavuori N130<<locked>>82%27,601 psi59%2083 fps95.2%
Vihtavuori N133<<locked>>90%30,734 psi66%2152 fps95.1%
Vihtavuori N135<<locked>>96%29,776 psi64%2211 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .30-30 Win. loaded with the .308 | 140gr | Nosler Custom Competition. Alliant AR-Comp delivers the highest muzzle velocity at 2,434 fps; across all powders the maximum-charge window runs from 1,503 fps to 2,434 fps. Accurate 2495 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 66–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.308" calls for a 1:16.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, SNPE Vectan SP 3, IMR 4198 rank at the top here: for .30-30 Win. with the .308 | 140gr | Nosler Custom Competition they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data