Load data for .30-30 Win. + .308 | 140gr | Hornady MonoFlex

Recommended Powder(s): Alliant Reloder-10x, IMR 4198, Norma 200, Vihtavuori N130

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 140gr \| Hornady MonoFlex
Manufacturer SKU:	30310
Bullet Weight:	140gr \| 9.1g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.040" \| 26.4mm
Caliber:	.30-30 Win. load data
Case Length (l3):	2.039" \| 51.8mm
Cartridge Length (C.O.L.):	2.512" \| 63.8mm
Seated Depth:	0.567" \| 14.4mm
Shank Seated Depth:	0.397" \| 10.1mm
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B2664_C328
Last updated:	2025-02-02
Recommended Twist Rate:	1:15 - 1:12

Load data for 70 loads in caliber .30-30 Win. with .308 | 140gr | Hornady MonoFlex bullet and 35 powders such as Alliant Reloder-10x, IMR 4198, Norma 200, Vihtavuori N130. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
Muzzle velocity vs. barrel length
Every 1 inch additional barrel length increases muzzle velocity by approx. 21.3 fps
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	88%	41176	89%	**65	100%
ADI AR 2219	<<locked>>	91%	41278	89%	**95	96%
Accurate 2015	<<locked>>	96%	39378	85%	**49	98%
[Accurate 2460]*	<<locked>>	95%	40582	87%	**62	93%
Accurate 2495	<<locked>>	96%	30530	66%	**77	96%
[Accurate 2520]*	<<locked>>	96%	33997	73%	**93	92%
Alliant AR-Comp	<<locked>>	96%	34853	75%	**29	99%
Alliant Reloder-10x 👍	<<locked>>	94%	41510	89%	**98	99%
Alliant Reloder-7	<<locked>>	86%	40683	88%	**23	99%
Baschieri & Pellagri 106	<<locked>>	91%	41684	90%	**06	97%
[Hodgdon Benchmark]*	<<locked>>	96%	40915	88%	**20	93%
[Hodgdon CFE BLK]*	<<locked>>	86%	40959	88%	**77	92%
Hodgdon H322	<<locked>>	97%	40756	88%	**88	96%
Hodgdon H335	<<locked>>	92%	41031	88%	**95	95%
Hodgdon H4198	<<locked>>	88%	41756	90%	**00	96%
[IMR 3031]*	<<locked>>	96%	30443	66%	**31	93%
IMR 4198 👍	<<locked>>	92%	41060	88%	**43	99%
[Lovex D073.4]*	<<locked>>	94%	41640	90%	**69	93%
[Lovex D073.5]*	<<locked>>	96%	41176	89%	**75	93%
Norma 200 👍	<<locked>>	90%	40437	87%	**69	99%
[Norma 202]*	<<locked>>	96%	33939	73%	**67	93%
[ReloadSwiss RS 40]*	<<locked>>	95%	41379	89%	**75	94%
[Rottweil R 901]*	<<locked>>	96%	37594	81%	**06	94%
SNPE Vectan BA6 1/2	<<locked>>	85%	40915	88%	**46	100%
SNPE Vectan SP 10	<<locked>>	91%	40799	88%	**88	95%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	37391	81%	**47	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	30298	65%	**06	92%
[Somchem S321]*	<<locked>>	97%	41524	89%	**95	92%
Somchem S335	<<locked>>	96%	35998	78%	**51	95%
Vihtavuori N120	<<locked>>	90%	40988	88%	**23	100%
Vihtavuori N130 👍	<<locked>>	96%	41582	90%	**43	99%
Vihtavuori N133	<<locked>>	97%	34809	75%	**24	96%
[Vihtavuori N140]*	<<locked>>	97%	32343	70%	**01	92%
[Vihtavuori N530]*	<<locked>>	96%	39900	86%	**56	92%
[Winchester 748]*	<<locked>>	97%	40857	88%	**98	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	32895	71%	**24	100%
[ADI AR 2219]*	<<locked>>	81%	29530	64%	**56	92%
[Accurate 2015]*	<<locked>>	81%	24468	53%	**31	93%
[Accurate 2460]*	<<locked>>	89%	32663	70%	**18	90%
[Accurate 2495]*	<<locked>>	86%	21277	46%	**31	90%
[Accurate 2520]*	<<locked>>	94%	30879	67%	**24	90%
[Alliant AR-Comp]*	<<locked>>	81%	22205	48%	**91	93%
Alliant Reloder-10x	<<locked>>	81%	27441	59%	**19	95%
Alliant Reloder-7	<<locked>>	81%	34954	75%	**21	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30269	65%	**96	93%
[Hodgdon Benchmark]*	<<locked>>	90%	34345	74%	**95	90%
[Hodgdon CFE BLK]*	<<locked>>	83%	37449	81%	**11	90%
[Hodgdon H322]*	<<locked>>	84%	27383	59%	**96	90%
[Hodgdon H335]*	<<locked>>	82%	29617	64%	**56	90%
[Hodgdon H4198]*	<<locked>>	81%	33707	73%	**56	93%
[IMR 3031]*	<<locked>>	91%	26194	56%	**13	91%
IMR 4198	<<locked>>	81%	30298	65%	**29	97%
[Lovex D073.4]*	<<locked>>	88%	33402	72%	**18	90%
[Lovex D073.5]*	<<locked>>	90%	32982	71%	**28	90%
Norma 200	<<locked>>	81%	30661	66%	**85	97%
[Norma 202]*	<<locked>>	91%	28529	61%	**42	90%
[ReloadSwiss RS 40]*	<<locked>>	87%	32547	70%	**08	90%
[Rottweil R 901]*	<<locked>>	88%	29472	64%	**39	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	37217	80%	**93	100%
[SNPE Vectan SP 10]*	<<locked>>	81%	29414	63%	**56	90%
[SNPE Vectan Tubal 3000]*	<<locked>>	88%	29138	63%	**80	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	92%	26934	58%	**28	90%
[Somchem S321]*	<<locked>>	93%	35839	77%	**93	90%
[Somchem S335]*	<<locked>>	86%	26020	56%	**31	90%
Vihtavuori N120	<<locked>>	81%	30705	66%	**42	100%
[Vihtavuori N130]*	<<locked>>	81%	26107	56%	**31	94%
[Vihtavuori N133]*	<<locked>>	82%	22858	49%	**36	90%
[Vihtavuori N140]*	<<locked>>	93%	28776	62%	**23	90%
[Vihtavuori N530]*	<<locked>>	93%	36550	79%	**93	90%
[Winchester 748]*	<<locked>>	93%	35317	76%	**87	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data