Load data for .30-30 Win. + .308 | 136gr | Geco ZERO

Recommended Powder(s): ADI AR 2207, Alliant Reloder-7, IMR 4198, Norma 200, Vihtavuori N120

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 136gr \| Geco ZERO
Manufacturer SKU:	2416070
Bullet Weight:	136gr \| 8.8g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	1.177" \| 29.9mm
Caliber:	.30-30 Win. load data
Case Length (l3):	2.039" \| 51.8mm
Cartridge Length (C.O.L.):	2.512" \| 63.8mm
Seated Depth:	0.704" \| 17.9mm
Shank Seated Depth:	0.704" \| 17.9mm
Case Capacity:	45.0 Grains of Water \| 2.92 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B9032_C328
Last updated:	2025-01-01

Load data for 42 loads in caliber .30-30 Win. with .308 | 136gr | Geco ZERO bullet and 21 powders such as ADI AR 2207, Alliant Reloder-7, IMR 4198, Norma 200, Vihtavuori N120. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207 👍	<<locked>>	92%	41220	89%	**62	100%
ADI AR 2219	<<locked>>	94%	40408	87%	**56	95%
Accurate 1680	<<locked>>	83%	41046	88%	**97	96%
Accurate 2015	<<locked>>	96%	34447	74%	**51	96%
Alliant AR-Comp	<<locked>>	96%	30980	67%	**18	96%
Alliant Reloder-10x	<<locked>>	97%	38696	83%	**43	98%
Alliant Reloder-7 👍	<<locked>>	91%	41756	90%	**33	99%
Baschieri & Pellagri 106	<<locked>>	95%	41524	89%	**83	96%
[Hodgdon H322]*	<<locked>>	96%	35317	76%	**60	93%
[Hodgdon H335]*	<<locked>>	96%	41089	89%	**65	93%
[Hodgdon H4198]*	<<locked>>	91%	40944	88%	**60	94%
IMR 4198 👍	<<locked>>	95%	40611	87%	**13	99%
IMR 4227	<<locked>>	85%	41104	89%	**74	100%
Lovex S053	<<locked>>	86%	41089	89%	**64	100%
Norma 200 👍	<<locked>>	95%	41669	90%	**75	99%
ReloadSwiss RS 36	<<locked>>	86%	41727	90%	**23	100%
SNPE Vectan BA6 1/2	<<locked>>	89%	41437	89%	**49	100%
[SNPE Vectan SP 10]*	<<locked>>	95%	40393	87%	**59	93%
Vihtavuori N120 👍	<<locked>>	95%	41176	89%	**23	100%
Vihtavuori N130	<<locked>>	97%	37202	80%	**54	97%
[Vihtavuori N133]*	<<locked>>	96%	30226	65%	**10	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	29153	63%	**39	98%
[ADI AR 2219]*	<<locked>>	86%	31053	67%	**62	90%
Accurate 1680	<<locked>>	81%	38189	82%	**47	95%
[Accurate 2015]*	<<locked>>	84%	23569	51%	**91	90%
[Alliant AR-Comp]*	<<locked>>	86%	22466	48%	**72	90%
[Alliant Reloder-10x]*	<<locked>>	81%	23728	51%	**11	92%
Alliant Reloder-7	<<locked>>	81%	31053	67%	**29	96%
[Baschieri & Pellagri 106]*	<<locked>>	83%	28935	62%	**37	91%
[Hodgdon H322]*	<<locked>>	92%	31053	67%	**62	90%
[Hodgdon H335]*	<<locked>>	90%	33924	73%	**31	90%
[Hodgdon H4198]*	<<locked>>	82%	31169	67%	**73	90%
[IMR 4198]*	<<locked>>	81%	27267	59%	**34	94%
IMR 4227	<<locked>>	81%	36912	80%	**01	99%
Lovex S053	<<locked>>	81%	35940	77%	**82	100%
[Norma 200]*	<<locked>>	81%	26600	57%	**80	94%
ReloadSwiss RS 36	<<locked>>	81%	35259	76%	**08	99%
SNPE Vectan BA6 1/2	<<locked>>	81%	33605	72%	**34	100%
[SNPE Vectan SP 10]*	<<locked>>	89%	33272	72%	**21	90%
Vihtavuori N120	<<locked>>	81%	27224	59%	**60	99%
[Vihtavuori N130]*	<<locked>>	81%	23177	50%	**42	91%
[Vihtavuori N133]*	<<locked>>	90%	25773	56%	**95	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.