
Load Specifications
Load data in caliber .30-30 Ackley Improved with .31 | 123gr | Prvi Partizan PSP bullet and 22 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, SNPE Vectan SP 3 and Alliant AR-Comp.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 82% | 40,379 psi | 87% | 2497 fps | 98.7% |
| Accurate 2015 | <<locked>> | 98% | 41,626 psi | 90% | 2598 fps | 98.3% |
| Accurate 2495ᴾ | <<locked>> | 100% | 32,837 psi | 71% | 2507 fps | 96.7% |
| Accurate LT-30 | <<locked>> | 88% | 41,452 psi | 89% | 2503 fps | 96.7% |
| ADI AR 2207 | <<locked>> | 86% | 39,871 psi | 86% | 2566 fps | 100% |
| ADI AR 2219 | <<locked>> | 90% | 40,770 psi | 88% | 2612 fps | 96.4% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 41,321 psi | 89% | 2674 fps | 99.8% |
| Alliant Reloder-10x | <<locked>> | 92% | 39,972 psi | 86% | 2595 fps | 98.9% |
| Alliant Reloder-7 | <<locked>> | 86% | 41,901 psi | 90% | 2566 fps | 99.4% |
| Baschieri & Pellagri 106 | <<locked>> | 88% | 39,479 psi | 85% | 2484 fps | 96.6% |
| Hodgdon H322 | <<locked>> | 96% | 41,147 psi | 89% | 2618 fps | 96.4% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 30,995 psi | 67% | 1667 fps | 100% |
| IMR 4198 | <<locked>> | 90% | 40,219 psi | 87% | 2552 fps | 99.4% |
| Norma 200 | <<locked>> | 88% | 40,263 psi | 87% | 2585 fps | 99.4% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 30,545 psi | 66% | 1703 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 84% | 41,394 psi | 89% | 2362 fps | 100% |
| SNPE Vectan SP 3 | <<locked>> | 92% | 41,046 psi | 88% | 2592 fps | 97.4% |
| Somchem S335 | <<locked>> | 98% | 39,479 psi | 85% | 2523 fps | 95.9% |
| Vihtavuori N120 | <<locked>> | 88% | 39,595 psi | 85% | 2520 fps | 100% |
| Vihtavuori N130 | <<locked>> | 94% | 40,147 psi | 87% | 2533 fps | 98.6% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 39,436 psi | 85% | 2526 fps | 97.6% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 34,969 psi | 75% | 2520 fps | 96.9% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 37,724 psi | 81% | 2448 fps | 98.2% |
| Accurate 2015 | <<locked>> | 88% | 30,472 psi | 66% | 2375 fps | 95% |
| Accurate 2495 | <<locked>> | 98% | 30,429 psi | 66% | 2451 fps | 95.8% |
| Accurate LT-30 | <<locked>> | 84% | 36,492 psi | 79% | 2408 fps | 95.2% |
| ADI AR 2207 | <<locked>> | 80% | 32,909 psi | 71% | 2431 fps | 99.7% |
| ADI AR 2219 | <<locked>> | 88% | 38,435 psi | 83% | 2566 fps | 95.6% |
| Alliant AR-Comp | 31.1 gr | 86% | 26,600 psi | 57% | 2329 fps | 95.7% |
| Alliant Reloder-10x | 28.2 gr | 80% | 27,427 psi | 59% | 2313 fps | 95% |
| Alliant Reloder-7 | <<locked>> | 80% | 34,679 psi | 75% | 2428 fps | 98% |
| Baschieri & Pellagri 106 | <<locked>> | 84% | 34,679 psi | 75% | 2388 fps | 95.1% |
| Hodgdon H322 | <<locked>> | 94% | 38,725 psi | 83% | 2572 fps | 95.7% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,785 psi | 49% | 1496 fps | 100% |
| IMR 4198 | <<locked>> | 80% | 29,936 psi | 65% | 2326 fps | 96.9% |
| Norma 200 | <<locked>> | 80% | 30,980 psi | 67% | 2392 fps | 97.3% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 22,553 psi | 49% | 1529 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 36,840 psi | 79% | 2293 fps | 100% |
| SNPE Vectan SP 3 | 30.4 gr | 86% | 34,156 psi | 74% | 2454 fps | 95.3% |
| Somchem S335 | <<locked>> | 96% | 37,246 psi | 80% | 2480 fps | 95.2% |
| Vihtavuori N120 | <<locked>> | 80% | 31,009 psi | 67% | 2356 fps | 99.9% |
| Vihtavuori N130 | <<locked>> | 84% | 29,602 psi | 64% | 2316 fps | 95.6% |
| Vihtavuori N133 | <<locked>> | 92% | 31,285 psi | 67% | 2356 fps | 95% |
| Vihtavuori N135 | <<locked>> | 96% | 31,009 psi | 67% | 2428 fps | 95.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 22 powders for .30-30 Ackley Improved loaded with the .31 | 123gr | Prvi Partizan PSP. Alliant AR-Comp delivers the highest muzzle velocity at 2,674 fps; across all powders the maximum-charge window runs from 1,667 fps to 2,674 fps. Accurate 2495 gives the best case fill at 100 %, and 22 of the 22 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (320 MPa), the top charges use 66–90 %, leaving at least 10 % headroom. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, SNPE Vectan SP 3, Alliant AR-Comp rank at the top here: for .30-30 Ackley Improved with the .31 | 123gr | Prvi Partizan PSP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.