Load data for .30-30 Ackley Improved + .308 | 90gr | Impala LWHV LS

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 90gr \| Impala LWHV LS
Bullet Weight:	90gr \| 5.8g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30-30 Ackley Improved load data
Case Length (l3):	2.030" \| 51.6mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	48.6 Grains of Water \| 3.16 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B2984_C326
Last updated:	2026-05-29

Load data for 42 loads in caliber .30-30 Ackley Improved with .308 | 90gr | Impala LWHV LS bullet and 21 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207 👍	<<locked>>	90%	41611	90%	**69	99%
[ADI AR 2219]*	<<locked>>	93%	41727	90%	**43	92%
Accurate 1680	<<locked>>	85%	40901	88%	**38	96%
[Accurate 2015]*	<<locked>>	96%	36376	78%	**18	93%
Alliant AR-Comp	<<locked>>	97%	34751	75%	**41	95%
Alliant Reloder-10x	<<locked>>	96%	40915	88%	**53	96%
Alliant Reloder-7	<<locked>>	88%	41466	89%	**04	97%
[Baschieri & Pellagri 106]*	<<locked>>	92%	41524	89%	**35	94%
[Hodgdon H322]*	<<locked>>	96%	41104	89%	**33	92%
[Hodgdon H4198]*	<<locked>>	87%	40944	88%	**31	92%
Hodgdon TrailBoss	<<locked>>	95%	28703	62%	**09	100%
IMR 4198	<<locked>>	93%	40930	88%	**04	97%
Lovex S053	<<locked>>	84%	41394	89%	**71	100%
Norma 200	<<locked>>	92%	41539	90%	**49	97%
ReloadSwiss RS 14	<<locked>>	97%	29022	63%	**65	100%
ReloadSwiss RS 36	<<locked>>	84%	41176	89%	**04	98%
SNPE Vectan BA6 1/2	<<locked>>	87%	41713	90%	**43	100%
[SNPE Vectan SP 3]*	<<locked>>	95%	41263	89%	**27	94%
Vihtavuori N120 👍	<<locked>>	90%	41655	90%	**30	100%
Vihtavuori N130	<<locked>>	97%	41162	89%	**87	96%
[Vihtavuori N133]*	<<locked>>	97%	36100	78%	**56	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	31575	68%	**43	97%
[ADI AR 2219]*	<<locked>>	89%	36840	79%	**31	90%
Accurate 1680	<<locked>>	81%	36347	78%	**40	95%
[Accurate 2015]*	<<locked>>	90%	30226	65%	**64	90%
[Alliant AR-Comp]*	<<locked>>	88%	26977	58%	**98	90%
[Alliant Reloder-10x]*	<<locked>>	82%	27006	58%	**98	90%
[Alliant Reloder-7]*	<<locked>>	81%	33330	72%	**17	94%
[Baschieri & Pellagri 106]*	<<locked>>	85%	33808	73%	**61	90%
[Hodgdon H322]*	<<locked>>	92%	36593	79%	**25	90%
[Hodgdon H4198]*	<<locked>>	84%	37260	80%	**49	90%
Hodgdon TrailBoss	<<locked>>	81%	23206	50%	**68	100%
[IMR 4198]*	<<locked>>	81%	29414	63%	**08	92%
Lovex S053	<<locked>>	81%	38348	83%	**12	100%
[Norma 200]*	<<locked>>	81%	30647	66%	**90	93%
ReloadSwiss RS 14	<<locked>>	81%	22829	49%	**04	100%
ReloadSwiss RS 36	<<locked>>	81%	38334	83%	**48	98%
SNPE Vectan BA6 1/2	<<locked>>	81%	35694	77%	**41	100%
[SNPE Vectan SP 3]*	<<locked>>	88%	33344	72%	**33	90%
Vihtavuori N120	<<locked>>	81%	31850	69%	**13	98%
[Vihtavuori N130]*	<<locked>>	83%	27543	59%	**46	90%
[Vihtavuori N133]*	<<locked>>	92%	31343	68%	**38	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data