Load data for .30-30 Ackley Improved + .308 | 130gr | Ferrobull Tripple Expand Jagd

.30-30 Ackley Improved cartridge drawing
Ferrobull Europe logo

Load Specifications

Bullet Manufacturer:Ferrobull Europe
Bullet Weight:130 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.03"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:48.6 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:15.0

Load data in caliber .30-30 Ackley Improved with .308 | 130gr | Ferrobull Tripple Expand Jagd bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, Norma 200 and ADI AR 2207.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%41,278 psi89%2434 fps99%
Accurate 2015<<locked>>98%39,624 psi85%2487 fps98%
Accurate 2495ᴾ<<locked>>100%30,066 psi65%2375 fps95.9%
Accurate LT-30<<locked>>88%39,798 psi86%2395 fps96.4%
ADI AR 2207<<locked>>88%40,611 psi88%2500 fps100%
ADI AR 2219<<locked>>92%41,814 psi90%2549 fps96.8%
Alliant AR-Compᴾ<<locked>>100%39,117 psi84%2552 fps99.7%
Alliant Reloder-10x<<locked>>94%40,625 psi88%2526 fps99.1%
Alliant Reloder-7<<locked>>86%40,190 psi87%2457 fps99.2%
Baschieri & Pellagri 106<<locked>>90%40,480 psi87%2425 fps97%
Hodgdon H322<<locked>>96%39,508 psi85%2507 fps96.1%
Hodgdon H4198<<locked>>88%41,336 psi89%2438 fps96.1%
Hodgdon TrailBossᴾ<<locked>>100%30,501 psi66%1594 fps100%
IMR 4198<<locked>>92%40,886 psi88%2480 fps99.5%
IMR 4227<<locked>>82%41,742 psi90%2438 fps100%
Lovex S053<<locked>>82%40,292 psi87%2398 fps100%
Norma 200<<locked>>90%40,625 psi88%2513 fps99.5%
ReloadSwiss RS 14ᴾ<<locked>>100%29,979 psi65%1631 fps100%
ReloadSwiss RS 36<<locked>>82%40,698 psi88%2457 fps99.9%
SNPE Vectan BA6 1/2<<locked>>84%39,726 psi86%2260 fps100%
SNPE Vectan SP 3<<locked>>92%39,392 psi85%2484 fps97.1%
Somchem S335ᴾ<<locked>>100%40,001 psi86%2457 fps96.2%
Vihtavuori N120<<locked>>90%40,451 psi87%2451 fps100%
Vihtavuori N130<<locked>>96%41,031 psi88%2470 fps98.9%
Vihtavuori N133ᴾ<<locked>>100%37,739 psi81%2418 fps97.4%
Vihtavuori N135ᴾ<<locked>>100%33,359 psi72%2411 fps96.5%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%36,303 psi78%2346 fps98%
Accurate 2015<<locked>>90%30,530 psi66%2306 fps95.3%
Accurate 2495<<locked>>98%27,920 psi60%2326 fps95%
Accurate LT-30<<locked>>86%37,347 psi80%2349 fps95.7%
ADI AR 220726.4 gr80%31,473 psi68%2329 fps99.6%
ADI AR 2219<<locked>>88%36,724 psi79%2454 fps95.2%
Alliant AR-Comp<<locked>>86%25,222 psi54%2221 fps95.2%
Alliant Reloder-10x27.3 gr82%27,586 psi59%2254 fps95.4%
Alliant Reloder-7<<locked>>80%33,011 psi71%2320 fps97.8%
Baschieri & Pellagri 106<<locked>>86%35,505 psi77%2333 fps95.6%
Hodgdon H322<<locked>>94%37,057 psi80%2461 fps95.4%
Hodgdon H4198<<locked>>86%38,798 psi84%2388 fps95.4%
Hodgdon TrailBoss<<locked>>80%22,176 psi48%1427 fps100%
IMR 4198<<locked>>80%28,645 psi62%2221 fps96.6%
IMR 4227<<locked>>80%38,957 psi84%2392 fps99.8%
Lovex S053<<locked>>80%38,072 psi82%2362 fps100%
Norma 20027.6 gr80%29,109 psi63%2280 fps96.9%
ReloadSwiss RS 14<<locked>>80%21,886 psi47%1460 fps100%
ReloadSwiss RS 36<<locked>>80%38,435 psi83%2418 fps99.8%
SNPE Vectan BA6 1/2<<locked>>80%35,752 psi77%2201 fps100%
SNPE Vectan SP 3<<locked>>88%34,838 psi75%2392 fps95.7%
Somchem S335<<locked>>98%37,536 psi81%2411 fps95.5%
Vihtavuori N120<<locked>>80%29,559 psi64%2251 fps99.8%
Vihtavuori N130<<locked>>84%28,123 psi61%2211 fps95.2%
Vihtavuori N133<<locked>>94%31,676 psi68%2293 fps95.4%
Vihtavuori N135<<locked>>98%31,241 psi67%2362 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .30-30 Ackley Improved loaded with the .308 | 130gr | Ferrobull Tripple Expand Jagd. Alliant AR-Comp delivers the highest muzzle velocity at 2,552 fps; across all powders the maximum-charge window runs from 1,594 fps to 2,552 fps. Accurate 2495 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. The 130.0 gr projectile in 0.308" calls for a 1:15.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, Norma 200, ADI AR 2207 rank at the top here: for .30-30 Ackley Improved with the .308 | 130gr | Ferrobull Tripple Expand Jagd they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data