Load data for .30-30 Ackley Improved + .308 | 123gr | Reichenberg HDB Universal

Recommended Powder(s): Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200, Vihtavuori N130

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 123gr \| Reichenberg HDB Universal
Bullet Weight:	123gr \| 8.0g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30-30 Ackley Improved load data
Case Length (l3):	2.030" \| 51.6mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	48.6 Grains of Water \| 3.16 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B10147_C326
Last updated:	2026-05-29

Load data for 74 loads in caliber .30-30 Ackley Improved with .308 | 123gr | Reichenberg HDB Universal bullet and 37 powders such as Alliant AR-Comp, Alliant Reloder-10x, IMR 4198, Norma 200, Vihtavuori N130. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	88%	41655	90%	**95	100%
ADI AR 2219	<<locked>>	91%	41060	88%	**12	96%
Accurate 1680	<<locked>>	83%	41365	89%	**07	99%
Accurate 2015	<<locked>>	97%	38653	83%	**43	98%
Accurate 2460	<<locked>>	95%	40596	87%	**85	95%
[Accurate 2495]*	<<locked>>	96%	26977	58%	**65	94%
[Accurate 2520]*	<<locked>>	97%	36970	80%	**49	93%
Alliant AR-Comp 👍	<<locked>>	97%	35723	77%	**52	99%
Alliant Reloder-10x 👍	<<locked>>	94%	41568	90%	**18	99%
Alliant Reloder-7	<<locked>>	86%	40814	88%	**43	99%
Baschieri & Pellagri 106	<<locked>>	90%	41539	89%	**10	97%
[Hodgdon Benchmark]*	<<locked>>	96%	41713	90%	**43	93%
Hodgdon H322	<<locked>>	94%	41495	89%	**18	96%
Hodgdon H335	<<locked>>	94%	41568	90%	**15	95%
Hodgdon H4198	<<locked>>	85%	41075	88%	**07	96%
Hodgdon TrailBoss	<<locked>>	96%	28747	62%	**24	100%
IMR 3031	<<locked>>	97%	34171	74%	**20	95%
IMR 4198 👍	<<locked>>	92%	41553	90%	**69	99%
[Lovex D073.4]*	<<locked>>	93%	40843	88%	**62	93%
[Lovex D073.5]*	<<locked>>	96%	41307	89%	**85	93%
Norma 200 👍	<<locked>>	90%	41481	89%	**02	99%
[Norma 202]*	<<locked>>	96%	34040	73%	**70	93%
ReloadSwiss RS 14	<<locked>>	95%	28108	61%	**57	100%
[ReloadSwiss RS 40]*	<<locked>>	94%	40857	88%	**79	94%
[Rottweil R 901]*	<<locked>>	96%	37405	81%	**13	94%
SNPE Vectan BA6 1/2	<<locked>>	84%	40640	88%	**49	100%
SNPE Vectan SP 10	<<locked>>	91%	40640	88%	**95	95%
SNPE Vectan SP 3	<<locked>>	93%	40640	88%	**82	97%
[SNPE Vectan Tubal 3000]*	<<locked>>	96%	37594	81%	**54	94%
[SNPE Vectan Tubal 5000]*	<<locked>>	96%	30313	65%	**03	92%
[Somchem S321]*	<<locked>>	97%	41582	90%	**08	92%
Somchem S335	<<locked>>	96%	36245	78%	**54	95%
Vihtavuori N120	<<locked>>	87%	40669	88%	**36	100%
Vihtavuori N130 👍	<<locked>>	95%	41466	89%	**49	99%
Vihtavuori N133	<<locked>>	96%	36970	80%	**67	97%
[Vihtavuori N135]*	<<locked>>	96%	28297	61%	**39	93%
[Vihtavuori N140]*	<<locked>>	97%	33489	72%	**21	93%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	32895	71%	**34	100%
[ADI AR 2219]*	<<locked>>	81%	29327	63%	**46	91%
Accurate 1680	<<locked>>	81%	38189	82%	**54	98%
[Accurate 2015]*	<<locked>>	81%	22843	49%	**65	90%
[Accurate 2460]*	<<locked>>	87%	29733	64%	**56	90%
[Accurate 2495]*	<<locked>>	90%	21611	47%	**11	91%
[Accurate 2520]*	<<locked>>	92%	31285	67%	**21	90%
[Alliant AR-Comp]*	<<locked>>	81%	21698	47%	**59	92%
[Alliant Reloder-10x]*	<<locked>>	81%	26803	58%	**93	94%
Alliant Reloder-7	<<locked>>	81%	34389	74%	**18	98%
[Baschieri & Pellagri 106]*	<<locked>>	81%	30356	65%	**87	93%
[Hodgdon Benchmark]*	<<locked>>	91%	35491	76%	**15	90%
[Hodgdon H322]*	<<locked>>	82%	27441	59%	**97	90%
[Hodgdon H335]*	<<locked>>	84%	30110	65%	**62	90%
[Hodgdon H4198]*	<<locked>>	81%	35824	77%	**02	94%
Hodgdon TrailBoss	<<locked>>	81%	22597	49%	**93	100%
[IMR 3031]*	<<locked>>	89%	26527	57%	**16	90%
IMR 4198	<<locked>>	81%	29805	64%	**20	97%
[Lovex D073.4]*	<<locked>>	89%	34476	74%	**38	90%
[Lovex D073.5]*	<<locked>>	90%	33823	73%	**41	90%
Norma 200	<<locked>>	81%	30458	66%	**82	97%
[Norma 202]*	<<locked>>	92%	29689	64%	**65	90%
ReloadSwiss RS 14	<<locked>>	80%	22162	48%	**22	100%
[ReloadSwiss RS 40]*	<<locked>>	88%	32721	70%	**11	90%
[Rottweil R 901]*	<<locked>>	89%	30008	65%	**46	90%
SNPE Vectan BA6 1/2	<<locked>>	81%	37260	80%	**97	100%
[SNPE Vectan SP 10]*	<<locked>>	82%	30342	65%	**75	91%
[SNPE Vectan SP 3]*	<<locked>>	81%	28253	61%	**00	92%
[SNPE Vectan Tubal 3000]*	<<locked>>	89%	29965	65%	**90	90%
[SNPE Vectan Tubal 5000]*	<<locked>>	93%	27833	60%	**38	90%
[Somchem S321]*	<<locked>>	93%	36245	78%	**00	90%
[Somchem S335]*	<<locked>>	87%	26890	58%	**38	90%
Vihtavuori N120	<<locked>>	81%	33257	72%	**05	100%
[Vihtavuori N130]*	<<locked>>	81%	26498	57%	**31	94%
[Vihtavuori N133]*	<<locked>>	82%	23931	52%	**49	90%
[Vihtavuori N135]*	<<locked>>	92%	24642	53%	**38	90%
[Vihtavuori N140]*	<<locked>>	93%	29225	63%	**20	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data