Load data for .30-30 Ackley Improved + .308 | 110gr | Barnes TAC-TX

Recommended Powder(s): ADI AR 2207, Alliant Reloder-7, ReloadSwiss RS 36, Vihtavuori N120

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 110gr \| Barnes TAC-TX
Manufacturer SKU:	30358
Bullet Weight:	110gr \| 7.1g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	<<locked>>
Caliber:	.30-30 Ackley Improved load data
Case Length (l3):	2.030" \| 51.6mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	48.6 Grains of Water \| 3.16 cm³
Primer Size:	Large Rifle (LR)
Max. allowed Pressure:	46412 psi \| 3200 bar
LID:	LID_B590_C326
Last updated:	2026-02-11

Load data for 44 loads in caliber .30-30 Ackley Improved with .308 | 110gr | Barnes TAC-TX bullet and 22 powders such as ADI AR 2207, Alliant Reloder-7, ReloadSwiss RS 36, Vihtavuori N120. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207 👍	<<locked>>	92%	41539	90%	**00	100%
[ADI AR 2219]*	<<locked>>	94%	41263	89%	**84	94%
Accurate 2015	<<locked>>	96%	35172	76%	**62	95%
Alliant AR-Comp	<<locked>>	96%	31647	68%	**26	95%
Alliant Reloder-10x	<<locked>>	97%	39813	86%	**77	97%
Alliant Reloder-7 👍	<<locked>>	90%	41249	89%	**38	98%
Baschieri & Pellagri 106	<<locked>>	94%	41640	90%	**95	95%
[Hodgdon H322]*	<<locked>>	96%	36216	78%	**82	92%
[Hodgdon H335]*	<<locked>>	95%	41655	90%	**90	93%
[Hodgdon H4198]*	<<locked>>	91%	41452	89%	**89	93%
Hodgdon TrailBoss	<<locked>>	97%	28543	61%	**90	100%
IMR 4198	<<locked>>	95%	40712	88%	**41	98%
IMR 4227	<<locked>>	84%	40698	88%	**89	99%
Lovex S053	<<locked>>	85%	40857	88%	**92	100%
Norma 200	<<locked>>	94%	41524	89%	**97	98%
ReloadSwiss RS 14	<<locked>>	96%	27905	60%	**22	100%
ReloadSwiss RS 36 👍	<<locked>>	85%	41191	89%	**41	99%
SNPE Vectan BA6 1/2	<<locked>>	89%	41698	90%	**74	100%
[SNPE Vectan SP 10]*	<<locked>>	95%	41713	90%	**90	93%
Vihtavuori N120 👍	<<locked>>	94%	40756	88%	**41	100%
Vihtavuori N130	<<locked>>	97%	37942	82%	**72	96%
[Vihtavuori N133]*	<<locked>>	96%	30893	67%	**08	92%

Max Load - Barrel Length: 23.60''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AR 2207	<<locked>>	81%	28877	62%	**31	98%
[ADI AR 2219]*	<<locked>>	88%	32750	71%	**00	90%
[Accurate 2015]*	<<locked>>	87%	25947	56%	**43	90%
[Alliant AR-Comp]*	<<locked>>	88%	24511	53%	**06	91%
[Alliant Reloder-10x]*	<<locked>>	81%	24163	52%	**97	90%
Alliant Reloder-7	<<locked>>	81%	30821	66%	**18	95%
[Baschieri & Pellagri 106]*	<<locked>>	84%	30516	66%	**56	90%
[Hodgdon H322]*	<<locked>>	94%	33315	72%	**16	90%
[Hodgdon H335]*	<<locked>>	91%	36390	78%	**79	90%
[Hodgdon H4198]*	<<locked>>	84%	33083	71%	**11	90%
Hodgdon TrailBoss	<<locked>>	92%	26353	57%	**44	100%
[IMR 4198]*	<<locked>>	81%	27441	59%	**26	93%
IMR 4227	<<locked>>	81%	37072	80%	**20	98%
Lovex S053	<<locked>>	81%	36187	78%	**07	100%
[Norma 200]*	<<locked>>	81%	26832	58%	**72	93%
ReloadSwiss RS 14	<<locked>>	89%	24772	53%	**54	100%
ReloadSwiss RS 36	<<locked>>	81%	35665	77%	**33	98%
SNPE Vectan BA6 1/2	<<locked>>	81%	34011	73%	**49	100%
[SNPE Vectan SP 10]*	<<locked>>	90%	35447	76%	**66	90%
Vihtavuori N120	<<locked>>	81%	27876	60%	**65	98%
[Vihtavuori N130]*	<<locked>>	83%	24482	53%	**51	90%
[Vihtavuori N133]*	<<locked>>	94%	28442	61%	**43	90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data