Load data for .30-30 Ackley Improved + .308 | 100gr | Lapua OT Cutting Edge

.30-30 Ackley Improved cartridge drawing
Lapua logo

Load Specifications

Bullet Manufacturer:Lapua
Bullet Weight:100 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.03"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:48.6 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:46,412 psi

Load data in caliber .30-30 Ackley Improved with .308 | 100gr | Lapua OT Cutting Edge bullet and 15 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, Norma 200 and IMR 4198.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%39,682 psi86%2703 fps96.6%
ADI AR 2207<<locked>>92%40,582 psi87%2831 fps99.7%
Alliant AR-Compᴾ<<locked>>100%34,650 psi75%2740 fps96.4%
Alliant Reloder-10x<<locked>>98%40,277 psi87%2835 fps97.1%
Alliant Reloder-7<<locked>>90%40,393 psi87%2772 fps97.4%
Hodgdon TrailBossᴾ<<locked>>100%29,559 psi64%1827 fps100%
IMR 4198<<locked>>96%40,959 psi88%2792 fps97.9%
IMR 4227<<locked>>84%39,755 psi86%2723 fps98.7%
Lovex S053<<locked>>86%40,959 psi88%2743 fps100%
Norma 200<<locked>>94%40,364 psi87%2822 fps97.8%
ReloadSwiss RS 14ᴾ<<locked>>100%28,935 psi62%1867 fps100%
ReloadSwiss RS 36<<locked>>86%41,234 psi89%2789 fps98.9%
SNPE Vectan BA6 1/2<<locked>>88%40,234 psi87%2602 fps100%
Vihtavuori N120<<locked>>94%40,379 psi87%2782 fps100%
Vihtavuori N130ᴾ<<locked>>100%40,828 psi88%2772 fps96.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%34,882 psi75%2605 fps95.1%
ADI AR 220727.9 gr80%27,630 psi60%2533 fps96.7%
Alliant AR-Comp<<locked>>98%32,561 psi70%2687 fps95.4%
Alliant Reloder-10x<<locked>>94%35,578 psi77%2736 fps95.7%
Alliant Reloder-7<<locked>>84%33,402 psi72%2621 fps95.3%
Hodgdon TrailBoss<<locked>>80%21,611 psi47%1640 fps100%
IMR 419829.5 gr88%32,808 psi71%2608 fps95.3%
IMR 4227<<locked>>80%35,012 psi75%2625 fps97.7%
Lovex S053<<locked>>80%34,258 psi74%2608 fps99.7%
Norma 20031.4 gr86%31,256 psi67%2621 fps95%
ReloadSwiss RS 14<<locked>>80%21,263 psi46%1680 fps100%
ReloadSwiss RS 36<<locked>>80%34,272 psi74%2641 fps97.4%
SNPE Vectan BA6 1/2<<locked>>80%32,184 psi69%2454 fps100%
Vihtavuori N120<<locked>>80%26,252 psi57%2457 fps97.3%
Vihtavuori N130<<locked>>96%36,129 psi78%2677 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 15 powders for .30-30 Ackley Improved loaded with the .308 | 100gr | Lapua OT Cutting Edge. Alliant Reloder-10x delivers the highest muzzle velocity at 2,835 fps; across all powders the maximum-charge window runs from 1,827 fps to 2,835 fps. Alliant AR-Comp gives the best case fill at 100 %, and 15 of the 15 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 62–89 %, leaving at least 11 % headroom. Alliant AR-Comp, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, Norma 200, IMR 4198 rank at the top here: for .30-30 Ackley Improved with the .308 | 100gr | Lapua OT Cutting Edge they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data