
Load Specifications
Load data in caliber .277 Fury Commercial with .277 | 85gr | Nosler Expansion Tip bullet and 48 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, SNPE Vectan SP 10 and Hodgdon H335.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 20"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 86% | 54,650 psi | 87% | 3153 fps | 100% |
| Accurate 2015ᴾ | <<locked>> | 100% | 55,506 psi | 88% | 3245 fps | 99.8% |
| Accurate 2460 | <<locked>> | 96% | 54,607 psi | 87% | 3245 fps | 97.8% |
| Accurate 2495ᴾ | <<locked>> | 100% | 43,308 psi | 69% | 3081 fps | 98.5% |
| Accurate 2520ᴾ | <<locked>> | 100% | 55,608 psi | 88% | 3294 fps | 97.6% |
| Accurate LT-30 | <<locked>> | 92% | 55,245 psi | 88% | 3166 fps | 99.1% |
| Accurate LT-32 | <<locked>> | 92% | 55,724 psi | 88% | 3179 fps | 97.6% |
| ADI AR 2207 | <<locked>> | 90% | 55,013 psi | 87% | 3222 fps | 100% |
| ADI AR 2219 | <<locked>> | 92% | 54,027 psi | 86% | 3271 fps | 98.7% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 51,924 psi | 82% | 3278 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 96% | 55,869 psi | 89% | 3281 fps | 100% |
| Alliant Reloder-7 | <<locked>> | 90% | 56,637 psi | 90% | 3228 fps | 100% |
| Baschieri & Pellagri 106 | <<locked>> | 92% | 54,201 psi | 86% | 3150 fps | 99.1% |
| Hodgdon Benchmark | <<locked>> | 98% | 54,694 psi | 87% | 3202 fps | 96.3% |
| Hodgdon H322 | <<locked>> | 96% | 55,695 psi | 88% | 3301 fps | 99% |
| Hodgdon H335 | <<locked>> | 94% | 53,447 psi | 85% | 3255 fps | 97.9% |
| Hodgdon H4198 | <<locked>> | 88% | 53,983 psi | 86% | 3169 fps | 98.5% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 32,010 psi | 51% | 2005 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 49,023 psi | 78% | 3245 fps | 98.7% |
| IMR 4198 | <<locked>> | 94% | 53,896 psi | 85% | 3209 fps | 100% |
| IMR 4227 | <<locked>> | 84% | 53,954 psi | 86% | 3146 fps | 100% |
| Lovex D073.4 | <<locked>> | 90% | 55,709 psi | 88% | 3281 fps | 97.4% |
| Lovex D073.5 | <<locked>> | 96% | 55,042 psi | 87% | 3245 fps | 96.6% |
| Lovex D073.6ᴾ | <<locked>> | 100% | 48,834 psi | 77% | 3186 fps | 96.2% |
| Lovex S053 | <<locked>> | 86% | 55,492 psi | 88% | 3133 fps | 100% |
| Norma 200 | <<locked>> | 92% | 55,709 psi | 88% | 3255 fps | 100% |
| Norma 202ᴾ | <<locked>> | 100% | 49,951 psi | 79% | 3189 fps | 97.2% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 31,879 psi | 51% | 2047 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 84% | 53,766 psi | 85% | 3173 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 96% | 55,245 psi | 88% | 3264 fps | 97.2% |
| Rottweil R 901ᴾ | <<locked>> | 100% | 53,838 psi | 85% | 3235 fps | 97.7% |
| Shooters World AR Plus | <<locked>> | 90% | 55,709 psi | 88% | 3281 fps | 97.4% |
| Shooters World Match Rifleᴾ | <<locked>> | 100% | 48,834 psi | 77% | 3186 fps | 96.2% |
| SNPE Vectan BA6 1/2 | <<locked>> | 90% | 55,753 psi | 88% | 2969 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 92% | 54,636 psi | 87% | 3271 fps | 98% |
| SNPE Vectan SP 3 | <<locked>> | 94% | 53,911 psi | 85% | 3241 fps | 99.3% |
| SNPE Vectan Tubal 3000ᴾ | <<locked>> | 100% | 53,577 psi | 85% | 3163 fps | 97.8% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 42,902 psi | 68% | 2969 fps | 96.6% |
| Somchem S321 | <<locked>> | 98% | 56,753 psi | 90% | 3301 fps | 96.3% |
| Somchem S335ᴾ | <<locked>> | 100% | 51,837 psi | 82% | 3153 fps | 98.3% |
| Vihtavuori N120 | <<locked>> | 90% | 55,027 psi | 87% | 3169 fps | 100% |
| Vihtavuori N130 | <<locked>> | 98% | 56,797 psi | 90% | 3225 fps | 100% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 52,678 psi | 83% | 3163 fps | 99.5% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 44,498 psi | 71% | 3100 fps | 98.7% |
| Vihtavuori N140ᴾ | <<locked>> | 100% | 47,485 psi | 75% | 3114 fps | 97% |
| Vihtavuori N530ᴾ | <<locked>> | 100% | 55,782 psi | 88% | 3258 fps | 95.8% |
| Vihtavuori N540ᴾ | <<locked>> | 100% | 45,788 psi | 73% | 3087 fps | 96% |
| Winchester 748ᴾ | <<locked>> | 100% | 53,563 psi | 85% | 3291 fps | 96.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 20"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 44,657 psi | 71% | 2976 fps | 99.2% |
| Accurate 2015 | <<locked>> | 84% | 32,895 psi | 52% | 2772 fps | 95.1% |
| Accurate 2460 | <<locked>> | 90% | 44,295 psi | 70% | 3051 fps | 95.5% |
| Accurate 2495 | <<locked>> | 92% | 32,314 psi | 51% | 2818 fps | 95.2% |
| Accurate 2520 | <<locked>> | 94% | 44,425 psi | 70% | 3091 fps | 95% |
| Accurate LT-30 | <<locked>> | 80% | 37,884 psi | 60% | 2822 fps | 95.4% |
| Accurate LT-32 | <<locked>> | 86% | 46,209 psi | 73% | 3002 fps | 95.6% |
| ADI AR 2207 | <<locked>> | 80% | 40,016 psi | 63% | 2949 fps | 100% |
| ADI AR 2219 | 38.1 gr | 82% | 38,145 psi | 60% | 2943 fps | 95% |
| Alliant AR-Comp | <<locked>> | 82% | 28,413 psi | 45% | 2723 fps | 95.8% |
| Alliant Reloder-10x | <<locked>> | 80% | 33,388 psi | 53% | 2805 fps | 96.5% |
| Alliant Reloder-7 | <<locked>> | 80% | 41,394 psi | 66% | 2949 fps | 99% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 36,405 psi | 58% | 2792 fps | 95.2% |
| Hodgdon Benchmark | <<locked>> | 96% | 51,343 psi | 81% | 3143 fps | 95.5% |
| Hodgdon H322 | <<locked>> | 86% | 39,639 psi | 63% | 2982 fps | 95.5% |
| Hodgdon H335 | 42.3 gr | 88% | 43,526 psi | 69% | 3061 fps | 95.5% |
| Hodgdon H4198 | <<locked>> | 80% | 41,858 psi | 66% | 2930 fps | 95.9% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,511 psi | 37% | 1795 fps | 100% |
| IMR 3031 | <<locked>> | 92% | 37,739 psi | 60% | 2992 fps | 95.8% |
| IMR 4198 | <<locked>> | 80% | 35,143 psi | 56% | 2822 fps | 98.1% |
| IMR 4227 | <<locked>> | 80% | 47,471 psi | 75% | 3031 fps | 100% |
| Lovex D073.4 | <<locked>> | 86% | 47,761 psi | 76% | 3133 fps | 95.6% |
| Lovex D073.5 | <<locked>> | 94% | 51,010 psi | 81% | 3176 fps | 95.8% |
| Lovex D073.6 | <<locked>> | 98% | 45,513 psi | 72% | 3120 fps | 95.3% |
| Lovex S053 | <<locked>> | 80% | 46,238 psi | 73% | 2982 fps | 100% |
| Norma 200 | <<locked>> | 80% | 37,869 psi | 60% | 2907 fps | 98.5% |
| Norma 202 | <<locked>> | 96% | 43,685 psi | 69% | 3064 fps | 95.7% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,279 psi | 37% | 1831 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 47,485 psi | 75% | 3064 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 92% | 48,457 psi | 77% | 3140 fps | 95.7% |
| Rottweil R 901 | <<locked>> | 94% | 44,628 psi | 71% | 3054 fps | 95.6% |
| Shooters World AR Plus | <<locked>> | 86% | 47,761 psi | 76% | 3133 fps | 95.6% |
| Shooters World Match Rifle | <<locked>> | 98% | 45,513 psi | 72% | 3120 fps | 95.3% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 42,569 psi | 67% | 2766 fps | 100% |
| SNPE Vectan SP 10 | 41.3 gr | 86% | 44,353 psi | 70% | 3074 fps | 95.7% |
| SNPE Vectan SP 3 | <<locked>> | 82% | 36,564 psi | 58% | 2884 fps | 95.5% |
| SNPE Vectan Tubal 3000 | <<locked>> | 94% | 44,338 psi | 70% | 2989 fps | 95.7% |
| SNPE Vectan Tubal 5000 | <<locked>> | 98% | 40,364 psi | 64% | 2913 fps | 95.9% |
| Somchem S321 | <<locked>> | 96% | 52,707 psi | 84% | 3228 fps | 95.4% |
| Somchem S335 | <<locked>> | 92% | 40,030 psi | 63% | 2913 fps | 95.6% |
| Vihtavuori N120 | <<locked>> | 80% | 40,147 psi | 64% | 2910 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 32,169 psi | 51% | 2717 fps | 95.9% |
| Vihtavuori N133 | <<locked>> | 86% | 33,939 psi | 54% | 2772 fps | 95.4% |
| Vihtavuori N135 | <<locked>> | 92% | 34,098 psi | 54% | 2861 fps | 95.8% |
| Vihtavuori N140 | <<locked>> | 96% | 41,539 psi | 66% | 2989 fps | 95.4% |
| Vihtavuori N530 | <<locked>> | 98% | 52,127 psi | 83% | 3192 fps | 95% |
| Vihtavuori N540 | <<locked>> | 98% | 42,873 psi | 68% | 3028 fps | 95.2% |
| Winchester 748 | <<locked>> | 98% | 50,111 psi | 79% | 3225 fps | 95.5% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 48 powders for .277 Fury Commercial loaded with the .277 | 85gr | Nosler Expansion Tip. Hodgdon H322 delivers the highest muzzle velocity at 3,301 fps; across all powders the maximum-charge window runs from 2,005 fps to 3,301 fps. Accurate 2015 gives the best case fill at 100 %, and 48 of the 48 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (435 MPa), the top charges use 51–90 %, leaving at least 10 % headroom. The 85.0 gr projectile in 0.277" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Accurate 2520 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, SNPE Vectan SP 10, Hodgdon H335 rank at the top here: for .277 Fury Commercial with the .277 | 85gr | Nosler Expansion Tip they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.