Load data for .260 Picra + .264 | 140gr | Winchester Powerpoint

.260 Picra cartridge drawing
Winchester logo

Load Specifications

Bullet Manufacturer:Winchester
Bullet Weight:140 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):1.515"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:38.6 Grains of Water
Primer Size:Large Pistol (LP)
Barrel Length:5"
Max. allowed Pressure:56,565 psi
Recommended Twist Rate:1:14.0

Load data in caliber .260 Picra with .264 | 140gr | Winchester Powerpoint bullet and 24 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N32C Tin Star, ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 60% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Accurate No. 11 FS²<<locked>>64%48,573 psi86%1394 fps96.6%
Accurate Solo 1000²<<locked>>64%48,878 psi86%1198 fps100%
ADI AP 100²<<locked>>64%47,587 psi84%1289 fps100%
ADI APS 350²<<locked>>72%48,791 psi86%1168 fps100%
ADI APS 450²<<locked>>72%49,501 psi88%1181 fps100%
ADI AS 30²<<locked>>68%50,111 psi89%1201 fps100%
Alliant Green Dot²<<locked>>64%49,922 psi88%1214 fps100%
Alliant Herco²<<locked>>68%47,732 psi84%1234 fps100%
Alliant RED DOT²<<locked>>68%49,821 psi88%1204 fps100%
Baschieri & Pellagri 102 Pistol²<<locked>>76%48,820 psi86%1184 fps100%
Hodgdon Clays<<locked>>80%49,197 psi87%1175 fps100%
Hodgdon TrailBossᴾ<<locked>>100%34,737 psi61%1014 fps100%
IMR 4227*²<<locked>>72%48,414 psi86%1398 fps94.9%
Maxam CSB 1²<<locked>>64%48,414 psi86%1204 fps100%
Maxam CSB 3²<<locked>>64%50,067 psi89%1214 fps100%
Maxam CSB 4²<<locked>>64%50,096 psi89%1211 fps100%
Maxam CSB 5²<<locked>>64%50,009 psi88%1194 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%34,983 psi62%1033 fps100%
ReloadSwiss RS 30²<<locked>>72%49,110 psi87%1398 fps99.7%
SNPE Vectan BA10²<<locked>>68%50,560 psi89%1191 fps100%
SNPE Vectan BA6 1/2²<<locked>>76%48,733 psi86%1358 fps100%
Somchem S265²<<locked>>68%46,485 psi82%1362 fps97.8%
Vihtavuori N110²<<locked>>68%48,588 psi86%1371 fps100%
Vihtavuori N32C Tin Star<<locked>>92%48,675 psi86%1152 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 5"

PowderChargeFRMaxP%V(0)z
Accurate No. 11 FS*²<<locked>>60%42,337 psi75%1312 fps94.5%
Accurate Solo 1000²<<locked>>60%45,034 psi80%1158 fps100%
ADI AP 100²<<locked>>60%42,960 psi76%1240 fps100%
ADI APS 350²<<locked>>60%38,827 psi69%1056 fps100%
ADI APS 450²<<locked>>60%39,015 psi69%1070 fps100%
ADI AS 30²<<locked>>60%42,467 psi75%1119 fps100%
Alliant Green Dot²<<locked>>60%45,513 psi80%1168 fps100%
Alliant Herco²<<locked>>60%39,624 psi70%1148 fps100%
Alliant RED DOT²<<locked>>60%42,047 psi74%1119 fps100%
Baschieri & Pellagri 102 Pistol²<<locked>>60%34,301 psi61%1027 fps100%
Hodgdon Clays²<<locked>>60%33,852 psi60%1004 fps100%
Hodgdon TrailBoss²6.8 gr60%17,811 psi31%764 fps100%
IMR 4227*²<<locked>>60%32,982 psi58%1178 fps87.6%
Maxam CSB 1²<<locked>>60%44,135 psi78%1161 fps100%
Maxam CSB 3²<<locked>>60%45,687 psi81%1171 fps100%
Maxam CSB 4²<<locked>>60%46,209 psi82%1168 fps100%
Maxam CSB 5²<<locked>>60%45,585 psi81%1145 fps100%
ReloadSwiss RS 14²7 gr60%18,144 psi32%784 fps100%
ReloadSwiss RS 30²<<locked>>60%33,939 psi60%1194 fps95.6%
SNPE Vectan BA10²<<locked>>60%42,888 psi76%1112 fps100%
SNPE Vectan BA6 1/2²<<locked>>60%31,111 psi55%1132 fps99%
Somchem S265*²<<locked>>60%36,347 psi64%1224 fps94.5%
Vihtavuori N110²<<locked>>60%38,014 psi67%1240 fps99.3%
Vihtavuori N32C Tin Star²9.3 gr60%27,485 psi49%909 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 24 powders for .260 Picra loaded with the .264 | 140gr | Winchester Powerpoint. IMR 4227 delivers the highest muzzle velocity at 1,398 fps; across all powders the maximum-charge window runs from 1,014 fps to 1,398 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 4 of the 24 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (390 MPa), the top charges use 61–89 %, leaving at least 11 % headroom. The 140.0 gr projectile in 0.264" calls for a 1:14.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N32C Tin Star, ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .260 Picra with the .264 | 140gr | Winchester Powerpoint they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, IMR 4227 burn incompletely and react more sensitively to barrel length and temperature. ADI APS 350, ADI APS 450, ADI AS 30 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data