top of page

Load data for .260 PICRA + .264 | 130gr | Norma VLD Diamond

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.260 PICRA + .264 | 130gr | Norma VLD Diamond

Load Specifications

Bullet:
.264 | 130gr | Norma VLD Diamond
Manufacturer SKU:
66508
Bullet Weight:
130gr | 8.4g
Bullet Diameter:
0.264" | 6.71mm
Bullet Length:
1.380" | 35.1mm
Caliber:
.260 PICRA
Case Length (l3):
1.515" | 38.5mm
Cartridge Length (C.O.L.):
2.404" | 61.1mm
Seated Depth:
0.491" | 12.5mm
Shank Seated Depth:
0.294" | 7.5mm
Case Capacity:
38.6 Grains of Water | 2.51 cm³
Primer Size:
Large Pistol (LP)
Max. allowed Pressure:
56565 psi | 3900 bar
LID:
LID_B3832_C251

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .260 PICRA with .264 | 130gr | Norma VLD Diamond bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
69%
50720
90%
**63
100%
ADI APS 350
<<locked>>
74%
50705
90%
**89
101%
ADI APS 450
<<locked>>
73%
50038
88%
**86
100%
ADI AS 30
<<locked>>
69%
49980
88%
**99
100%
Accurate No. 11 FS
<<locked>>
69%
50560
89%
**94
98%
Accurate Solo 1000
<<locked>>
65%
49052
87%
**09
100%
Accurate Solo 1250
<<locked>>
63%
48994
87%
**25
100%
Alliant BLUE DOT
<<locked>>
65%
49603
88%
**16
100%
Baschieri & Pellagri 100
<<locked>>
63%
49168
87%
**96
100%
Hodgdon Clays
<<locked>>
72%
50314
89%
**86
100%
Hodgdon H110
<<locked>>
64%
49530
88%
**75
99%
Hodgdon LilGun
<<locked>>
63%
49922
88%
**72
100%
Hodgdon TrailBoss
<<locked>>
95%
31546
56%
**56
100%
Maxam CSB 1
<<locked>>
66%
49429
87%
**22
100%
Maxam CSB 2
<<locked>>
63%
50473
89%
**25
100%
Maxam CSB 3
<<locked>>
65%
49269
87%
**22
100%
Maxam CSB 4
<<locked>>
65%
50096
89%
**16
100%
Maxam CSB 5
<<locked>>
65%
49530
88%
**96
100%
ReloadSwiss RS 14
<<locked>>
95%
31473
56%
**83
100%
ReloadSwiss RS 30 👍
<<locked>>
77%
50647
90%
**08
100%
SNPE Vectan A0
<<locked>>
64%
50125
89%
**62
100%
SNPE Vectan BA10
<<locked>>
68%
50038
88%
**86
100%
SNPE Vectan BA6 1/2
<<locked>>
81%
50125
89%
**29
100%
SNPE Vectan BA7 1/2
<<locked>>
64%
49400
87%
**98
100%
Somchem S265 👍
<<locked>>
74%
49603
88%
**65
99%
Vihtavuori N110
<<locked>>
73%
50633
90%
**58
100%
Vihtavuori N32C Tin Star
<<locked>>
88%
50676
90%
**70
100%
Winchester 296
<<locked>>
63%
50038
88%
**08
98%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
61%
41771
74%
**55
100%
ADI APS 350
<<locked>>
62%
39581
70%
**55
100%
ADI APS 450
<<locked>>
61%
39450
70%
**68
100%
ADI AS 30
<<locked>>
61%
42453
75%
**14
100%
Accurate No. 11 FS
<<locked>>
61%
38435
68%
**24
95%
Accurate Solo 1000
<<locked>>
61%
45165
80%
**63
100%
Accurate Solo 1250
<<locked>>
61%
46891
83%
**99
100%
Alliant BLUE DOT
<<locked>>
61%
44324
78%
**50
100%
Baschieri & Pellagri 100
<<locked>>
61%
47311
84%
**73
100%
Hodgdon Clays
<<locked>>
62%
40901
72%
**78
100%
Hodgdon H110
<<locked>>
61%
44788
79%
**16
99%
Hodgdon LilGun
<<locked>>
61%
46383
82%
**22
100%
Hodgdon TrailBoss
<<locked>>
61%
17782
31%
**3
100%
Maxam CSB 1
<<locked>>
61%
43801
77%
**63
100%
Maxam CSB 2
<<locked>>
61%
48617
86%
**09
100%
Maxam CSB 3
<<locked>>
61%
45324
80%
**76
100%
Maxam CSB 4
<<locked>>
61%
46180
82%
**70
100%
Maxam CSB 5
<<locked>>
61%
45687
81%
**50
100%
ReloadSwiss RS 14
<<locked>>
62%
17985
32%
**6
100%
ReloadSwiss RS 30
<<locked>>
61%
30313
54%
**02
96%
SNPE Vectan A0
<<locked>>
61%
46296
82%
**19
100%
SNPE Vectan BA10
<<locked>>
61%
42888
76%
**07
100%
SNPE Vectan BA6 1/2
<<locked>>
61%
28427
50%
**34
99%
SNPE Vectan BA7 1/2
<<locked>>
61%
45847
81%
**68
100%
Somchem S265
<<locked>>
61%
34127
60%
**45
95%
Vihtavuori N110
<<locked>>
61%
34867
62%
**62
99%
Vihtavuori N32C Tin Star
<<locked>>
61%
30560
54%
**33
100%
Winchester 296
<<locked>>
61%
46775
83%
**58
97%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page