top of page

Load data for .260 PICRA + .264 | 130gr | Berger VLD Target

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.260 PICRA + .264 | 130gr | Berger VLD Target

Load Specifications

Bullet:
.264 | 130gr | Berger VLD Target
Manufacturer SKU:
26403
Bullet Weight:
130gr | 8.4g
Bullet Diameter:
0.264" | 6.71mm
Bullet Length:
1.310" | 33.3mm
Caliber:
.260 PICRA
Case Length (l3):
1.515" | 38.5mm
Cartridge Length (C.O.L.):
2.404" | 61.1mm
Seated Depth:
0.421" | 10.7mm
Shank Seated Depth:
0.198" | 5.0mm
Case Capacity:
38.6 Grains of Water | 2.51 cm³
Primer Size:
Large Pistol (LP)
Max. allowed Pressure:
56565 psi | 3900 bar
LID:
LID_B993_C251

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .260 PICRA with .264 | 130gr | Berger VLD Target bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
68%
50807
90%
**63
100%
ADI APS 350
<<locked>>
73%
49922
88%
**80
100%
ADI APS 450
<<locked>>
72%
49226
87%
**89
100%
ADI AS 30
<<locked>>
69%
50212
89%
**12
100%
Accurate No. 11 FS
<<locked>>
68%
49284
87%
**65
98%
Accurate Solo 1000
<<locked>>
66%
50256
89%
**16
100%
Accurate Solo 1250
<<locked>>
63%
49255
87%
**22
100%
Alliant BLUE DOT
<<locked>>
65%
50328
89%
**19
100%
Baschieri & Pellagri 100
<<locked>>
63%
49356
87%
**06
100%
Hodgdon Clays
<<locked>>
71%
49676
88%
**83
101%
Hodgdon H110
<<locked>>
64%
49821
88%
**68
99%
Hodgdon LilGun
<<locked>>
63%
50256
89%
**68
100%
Hodgdon TrailBoss
<<locked>>
97%
32561
58%
**79
100%
Maxam CSB 1
<<locked>>
66%
49559
88%
**29
100%
Maxam CSB 2
<<locked>>
63%
50705
90%
**35
100%
Maxam CSB 3
<<locked>>
65%
49501
88%
**22
100%
Maxam CSB 4
<<locked>>
65%
50328
89%
**25
100%
Maxam CSB 5
<<locked>>
65%
49763
88%
**96
100%
ReloadSwiss RS 14
<<locked>>
96%
32547
58%
**99
100%
ReloadSwiss RS 30 👍
<<locked>>
76%
49559
88%
**81
100%
SNPE Vectan A0
<<locked>>
64%
50241
89%
**68
100%
SNPE Vectan BA10
<<locked>>
68%
50082
89%
**96
100%
SNPE Vectan BA6 1/2
<<locked>>
81%
50459
89%
**29
100%
SNPE Vectan BA7 1/2
<<locked>>
64%
49443
87%
**98
100%
Somchem S265 👍
<<locked>>
73%
49850
88%
**58
99%
Vihtavuori N110
<<locked>>
72%
49545
88%
**55
100%
Vihtavuori N32C Tin Star
<<locked>>
88%
50633
90%
**73
100%
Winchester 296
<<locked>>
63%
50604
89%
**08
98%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
61%
41945
74%
**58
100%
ADI APS 350
<<locked>>
61%
39233
69%
**52
100%
ADI APS 450
<<locked>>
61%
39088
69%
**61
100%
ADI AS 30
<<locked>>
61%
42946
76%
**20
100%
Accurate No. 11 FS
<<locked>>
61%
39088
69%
**34
95%
Accurate Solo 1000
<<locked>>
61%
44686
79%
**57
100%
Accurate Solo 1250
<<locked>>
61%
47195
83%
**09
100%
Alliant BLUE DOT
<<locked>>
61%
45295
80%
**60
100%
Baschieri & Pellagri 100
<<locked>>
61%
47558
84%
**83
100%
Hodgdon Clays
<<locked>>
61%
40364
71%
**75
100%
Hodgdon H110
<<locked>>
61%
45368
80%
**19
99%
Hodgdon LilGun
<<locked>>
61%
47123
83%
**26
100%
Hodgdon TrailBoss
<<locked>>
61%
17854
32%
**7
100%
Maxam CSB 1
<<locked>>
61%
44106
78%
**73
100%
Maxam CSB 2
<<locked>>
61%
48863
86%
**06
100%
Maxam CSB 3
<<locked>>
61%
45672
81%
**76
100%
Maxam CSB 4
<<locked>>
61%
46543
82%
**83
100%
Maxam CSB 5
<<locked>>
61%
45963
81%
**53
100%
ReloadSwiss RS 14
<<locked>>
61%
18014
32%
**0
100%
ReloadSwiss RS 30
<<locked>>
61%
31111
55%
**06
96%
SNPE Vectan A0
<<locked>>
61%
46485
82%
**29
100%
SNPE Vectan BA10
<<locked>>
61%
43134
76%
**20
100%
SNPE Vectan BA6 1/2
<<locked>>
61%
29138
52%
**30
99%
SNPE Vectan BA7 1/2
<<locked>>
61%
45992
81%
**71
100%
Somchem S265
<<locked>>
61%
34693
61%
**45
95%
Vihtavuori N110
<<locked>>
61%
35766
63%
**55
99%
Vihtavuori N32C Tin Star
<<locked>>
61%
30908
55%
**40
100%
Winchester 296
<<locked>>
61%
47253
84%
**58
97%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page