top of page

Load data for .260 PICRA + .264 | 130gr | Berger Hybrid OTM Tactical

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.260 PICRA + .264 | 130gr | Berger Hybrid OTM Tactical

Load Specifications

Bullet:
.264 | 130gr | Berger Hybrid OTM Tactical
Manufacturer SKU:
26195
Bullet Weight:
130gr | 8.4g
Bullet Diameter:
0.264" | 6.71mm
Bullet Length:
1.295" | 32.9mm
Caliber:
.260 PICRA
Case Length (l3):
1.515" | 38.5mm
Cartridge Length (C.O.L.):
2.404" | 61.1mm
Seated Depth:
0.406" | 10.3mm
Shank Seated Depth:
0.176" | 4.5mm
Case Capacity:
38.6 Grains of Water | 2.51 cm³
Primer Size:
Large Pistol (LP)
Max. allowed Pressure:
56565 psi | 3900 bar
LID:
LID_B988_C251

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 56 loads in caliber .260 PICRA with .264 | 130gr | Berger Hybrid OTM Tactical bullet and 28 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
68%
50256
89%
**47
100%
ADI APS 350
<<locked>>
74%
50444
89%
**83
100%
ADI APS 450
<<locked>>
73%
49559
88%
**86
100%
ADI AS 30
<<locked>>
69%
49951
88%
**02
100%
ADI AS 50N
<<locked>>
62%
50894
90%
**35
100%
Accurate No. 11 FS
<<locked>>
68%
49559
88%
**72
98%
Accurate Solo 1000
<<locked>>
67%
50807
90%
**32
100%
Accurate Solo 1250
<<locked>>
64%
50676
90%
**48
100%
Alliant BLUE DOT
<<locked>>
65%
50662
90%
**29
100%
Baschieri & Pellagri 100
<<locked>>
63%
48979
87%
**96
100%
Hodgdon Clays
<<locked>>
72%
50198
89%
**93
100%
Hodgdon H110
<<locked>>
64%
50125
89%
**75
99%
Hodgdon LilGun
<<locked>>
63%
50618
89%
**78
100%
Hodgdon TrailBoss
<<locked>>
96%
32343
57%
**70
100%
Maxam CSB 1
<<locked>>
66%
49226
87%
**19
100%
Maxam CSB 2
<<locked>>
62%
50401
89%
**25
100%
Maxam CSB 3
<<locked>>
64%
48907
86%
**12
100%
Maxam CSB 4
<<locked>>
64%
49806
88%
**19
100%
Maxam CSB 5
<<locked>>
64%
49356
87%
**89
100%
ReloadSwiss RS 14
<<locked>>
96%
32271
57%
**89
100%
ReloadSwiss RS 30 👍
<<locked>>
76%
49908
88%
**91
100%
SNPE Vectan A0
<<locked>>
64%
49661
88%
**58
100%
SNPE Vectan BA10
<<locked>>
68%
49559
88%
**86
100%
SNPE Vectan BA6 1/2
<<locked>>
80%
49980
88%
**26
100%
SNPE Vectan BA7 1/2
<<locked>>
64%
49806
88%
**07
100%
Somchem S265 👍
<<locked>>
74%
50850
90%
**78
99%
Vihtavuori N110
<<locked>>
72%
49951
88%
**45
100%
Vihtavuori N32C Tin Star
<<locked>>
87%
49995
88%
**63
100%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
61%
41640
74%
**48
100%
ADI APS 350
<<locked>>
62%
39697
70%
**65
100%
ADI APS 450
<<locked>>
61%
39465
70%
**75
100%
ADI AS 30
<<locked>>
61%
42438
75%
**24
100%
ADI AS 50N
<<locked>>
61%
48892
86%
**09
100%
Accurate No. 11 FS
<<locked>>
61%
39407
70%
**24
95%
Accurate Solo 1000
<<locked>>
61%
45223
80%
**70
100%
Accurate Solo 1250
<<locked>>
61%
46804
83%
**02
100%
Alliant BLUE DOT
<<locked>>
61%
45658
81%
**73
100%
Baschieri & Pellagri 100
<<locked>>
61%
46963
83%
**73
100%
Hodgdon Clays
<<locked>>
62%
41017
73%
**81
100%
Hodgdon H110
<<locked>>
61%
45542
81%
**26
99%
Hodgdon LilGun
<<locked>>
61%
47529
84%
**39
100%
Hodgdon TrailBoss
<<locked>>
61%
17680
31%
**7
100%
Maxam CSB 1
<<locked>>
61%
43801
77%
**63
100%
Maxam CSB 2
<<locked>>
61%
48501
86%
**09
100%
Maxam CSB 3
<<locked>>
61%
45353
80%
**80
100%
Maxam CSB 4
<<locked>>
61%
46151
82%
**76
100%
Maxam CSB 5
<<locked>>
61%
45716
81%
**57
100%
ReloadSwiss RS 14
<<locked>>
61%
17854
32%
**6
100%
ReloadSwiss RS 30
<<locked>>
61%
31314
55%
**19
96%
SNPE Vectan A0
<<locked>>
61%
46093
81%
**19
100%
SNPE Vectan BA10
<<locked>>
61%
42859
76%
**14
100%
SNPE Vectan BA6 1/2
<<locked>>
61%
28935
51%
**27
99%
SNPE Vectan BA7 1/2
<<locked>>
61%
46325
82%
**68
100%
Somchem S265
<<locked>>
61%
34301
61%
**39
95%
Vihtavuori N110
<<locked>>
61%
36143
64%
**68
100%
Vihtavuori N32C Tin Star
<<locked>>
61%
30705
54%
**33
100%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page