top of page

Load data for .260 PICRA + .264 | 130gr | Barnes Solid BT

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.260 PICRA + .264 | 130gr | Barnes Solid BT

Load Specifications

Bullet:
.264 | 130gr | Barnes Solid BT
Manufacturer SKU:
26412
Bullet Weight:
130gr | 8.4g
Bullet Diameter:
0.264" | 6.71mm
Bullet Length:
1.366" | 34.7mm
Caliber:
.260 PICRA
Case Length (l3):
1.515" | 38.5mm
Cartridge Length (C.O.L.):
2.404" | 61.1mm
Seated Depth:
0.477" | 12.1mm
Shank Seated Depth:
0.377" | 9.6mm
Case Capacity:
38.6 Grains of Water | 2.51 cm³
Primer Size:
Large Pistol (LP)
Max. allowed Pressure:
56565 psi | 3900 bar
LID:
LID_B518_C251

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 60 loads in caliber .260 PICRA with .264 | 130gr | Barnes Solid BT bullet and 30 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
69%
50053
88%
**53
100%
ADI APS 350
<<locked>>
74%
50256
89%
**80
100%
ADI APS 450
<<locked>>
73%
49574
88%
**86
100%
ADI AS 30
<<locked>>
69%
49559
88%
**99
100%
ADI AS 50N
<<locked>>
63%
50459
89%
**22
100%
Accurate 4100
<<locked>>
63%
50546
89%
**62
100%
Accurate No. 11 FS
<<locked>>
69%
49922
88%
**88
98%
Accurate Solo 1000
<<locked>>
67%
50575
89%
**19
100%
Accurate Solo 1250
<<locked>>
64%
50401
89%
**35
100%
Alliant BLUE DOT
<<locked>>
66%
50676
90%
**32
100%
Baschieri & Pellagri 100
<<locked>>
64%
50662
90%
**06
100%
Hodgdon Clays
<<locked>>
72%
49922
88%
**76
100%
Hodgdon H110 👍
<<locked>>
65%
50198
89%
**75
99%
Hodgdon LilGun
<<locked>>
64%
50589
89%
**72
100%
Hodgdon TrailBoss
<<locked>>
94%
31024
55%
**50
100%
Maxam CSB 1
<<locked>>
68%
50778
90%
**45
100%
Maxam CSB 2
<<locked>>
62%
49951
88%
**25
100%
Maxam CSB 3
<<locked>>
66%
50575
89%
**32
100%
Maxam CSB 4
<<locked>>
65%
49530
88%
**06
100%
Maxam CSB 5
<<locked>>
65%
50111
89%
**93
100%
ReloadSwiss RS 14
<<locked>>
94%
30995
55%
**70
100%
ReloadSwiss RS 30 👍
<<locked>>
78%
50082
89%
**01
100%
SNPE Vectan A0
<<locked>>
64%
49487
87%
**52
100%
SNPE Vectan BA10
<<locked>>
69%
50604
89%
**96
100%
SNPE Vectan BA6 1/2
<<locked>>
81%
49603
88%
**22
100%
SNPE Vectan BA7 1/2
<<locked>>
65%
50734
90%
**21
100%
Somchem S265 👍
<<locked>>
75%
50328
89%
**62
99%
Vihtavuori N110
<<locked>>
73%
49864
88%
**45
100%
Vihtavuori N32C Tin Star
<<locked>>
88%
50270
89%
**63
100%
Winchester 296
<<locked>>
64%
50879
90%
**08
98%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
61%
41089
73%
**42
100%
ADI APS 350
<<locked>>
61%
39073
69%
**52
100%
ADI APS 450
<<locked>>
61%
39059
69%
**65
100%
ADI AS 30
<<locked>>
61%
41858
74%
**07
100%
ADI AS 50N
<<locked>>
61%
48472
86%
**06
100%
Accurate 4100
<<locked>>
61%
47137
83%
**26
100%
Accurate No. 11 FS
<<locked>>
61%
37797
67%
**14
94%
Accurate Solo 1000
<<locked>>
61%
44686
79%
**53
100%
Accurate Solo 1250
<<locked>>
61%
46296
82%
**99
100%
Alliant BLUE DOT
<<locked>>
61%
43671
77%
**37
100%
Baschieri & Pellagri 100
<<locked>>
61%
46572
82%
**70
100%
Hodgdon Clays
<<locked>>
61%
40292
71%
**65
100%
Hodgdon H110
<<locked>>
61%
43830
77%
**03
98%
Hodgdon LilGun
<<locked>>
61%
45324
80%
**06
100%
Hodgdon TrailBoss
<<locked>>
60%
17216
30%
**3
100%
Maxam CSB 1
<<locked>>
61%
43265
76%
**60
100%
Maxam CSB 2
<<locked>>
61%
47993
85%
**96
100%
Maxam CSB 3
<<locked>>
61%
44875
79%
**63
100%
Maxam CSB 4
<<locked>>
61%
45614
81%
**66
100%
Maxam CSB 5
<<locked>>
61%
46137
82%
**47
100%
ReloadSwiss RS 14
<<locked>>
61%
17332
31%
**3
100%
ReloadSwiss RS 30
<<locked>>
61%
29428
52%
**80
95%
SNPE Vectan A0
<<locked>>
61%
45658
81%
**09
100%
SNPE Vectan BA10
<<locked>>
61%
43279
77%
**17
100%
SNPE Vectan BA6 1/2
<<locked>>
61%
27615
49%
**14
99%
SNPE Vectan BA7 1/2
<<locked>>
61%
45295
80%
**58
100%
Somchem S265
<<locked>>
61%
33417
59%
**32
95%
Vihtavuori N110
<<locked>>
61%
33997
60%
**39
99%
Vihtavuori N32C Tin Star
<<locked>>
61%
30023
53%
**27
100%
Winchester 296
<<locked>>
61%
45759
81%
**45
97%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page