top of page

Load data for .260 PICRA + .264 | 120gr | Sierra HPBT MatchKing

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.260 PICRA + .264 | 120gr | Sierra HPBT MatchKing

Load Specifications

Bullet:
.264 | 120gr | Sierra HPBT MatchKing
Manufacturer SKU:
1725
Bullet Weight:
120gr | 7.8g
Bullet Diameter:
0.264" | 6.71mm
Bullet Length:
1.179" | 29.9mm
Caliber:
.260 PICRA
Case Length (l3):
1.515" | 38.5mm
Cartridge Length (C.O.L.):
2.404" | 61.1mm
Seated Depth:
0.290" | 7.4mm
Shank Seated Depth:
0.140" | 3.5mm
Case Capacity:
38.6 Grains of Water | 2.51 cm³
Primer Size:
Large Pistol (LP)
Max. allowed Pressure:
56565 psi | 3900 bar
LID:
LID_B5805_C251

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 56 loads in caliber .260 PICRA with .264 | 120gr | Sierra HPBT MatchKing bullet and 28 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
68%
50154
89%
**19
100%
ADI APS 350
<<locked>>
75%
50821
90%
**42
101%
ADI APS 450
<<locked>>
74%
50633
90%
**62
100%
ADI AS 30
<<locked>>
68%
49197
87%
**55
100%
Accurate No. 11 FS
<<locked>>
69%
50430
89%
**37
97%
Accurate Solo 1000
<<locked>>
66%
50024
88%
**81
100%
Accurate Solo 1250
<<locked>>
64%
50691
90%
**04
100%
Alliant BLUE DOT
<<locked>>
65%
50807
90%
**91
100%
Baschieri & Pellagri 100
<<locked>>
64%
50865
90%
**71
100%
Hodgdon Clays
<<locked>>
73%
50531
89%
**55
100%
Hodgdon H110 👍
<<locked>>
64%
49487
87%
**27
99%
Hodgdon LilGun
<<locked>>
63%
49458
87%
**08
100%
Hodgdon TrailBoss
<<locked>>
95%
31386
55%
**09
100%
Maxam CSB 1
<<locked>>
67%
50894
90%
**04
100%
Maxam CSB 2
<<locked>>
62%
50328
89%
**78
100%
Maxam CSB 3
<<locked>>
64%
49153
87%
**68
100%
Maxam CSB 4
<<locked>>
65%
50125
89%
**78
100%
Maxam CSB 5
<<locked>>
65%
49676
88%
**48
100%
ReloadSwiss RS 14
<<locked>>
97%
32576
58%
**45
100%
ReloadSwiss RS 30
<<locked>>
76%
49342
87%
**24
100%
SNPE Vectan A0
<<locked>>
64%
49313
87%
**21
100%
SNPE Vectan BA10
<<locked>>
68%
49719
88%
**42
100%
SNPE Vectan BA6 1/2 👍
<<locked>>
81%
49835
88%
**91
100%
SNPE Vectan BA7 1/2
<<locked>>
65%
50560
89%
**70
100%
Somchem S265
<<locked>>
73%
49690
88%
**27
99%
Vihtavuori N110
<<locked>>
72%
49937
88%
**04
100%
Vihtavuori N32C Tin Star
<<locked>>
88%
50531
89%
**29
100%
Winchester 296
<<locked>>
63%
50212
89%
**40
97%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
61%
41887
74%
**14
100%
ADI APS 350
<<locked>>
61%
38928
69%
**07
100%
ADI APS 450
<<locked>>
61%
39305
69%
**20
100%
ADI AS 30
<<locked>>
61%
42221
75%
**70
100%
Accurate No. 11 FS
<<locked>>
61%
39131
69%
**67
93%
Accurate Solo 1000
<<locked>>
61%
44759
79%
**12
100%
Accurate Solo 1250
<<locked>>
61%
46891
83%
**58
100%
Alliant BLUE DOT
<<locked>>
61%
44396
78%
**99
100%
Baschieri & Pellagri 100
<<locked>>
61%
47268
84%
**32
100%
Hodgdon Clays
<<locked>>
61%
40089
71%
**24
100%
Hodgdon H110
<<locked>>
61%
45281
80%
**68
98%
Hodgdon LilGun
<<locked>>
61%
46456
82%
**72
100%
Hodgdon TrailBoss
<<locked>>
61%
17608
31%
**6
100%
Maxam CSB 1
<<locked>>
61%
43874
78%
**25
100%
Maxam CSB 2
<<locked>>
61%
48559
86%
**68
100%
Maxam CSB 3
<<locked>>
61%
45585
81%
**29
100%
Maxam CSB 4
<<locked>>
61%
46514
82%
**39
100%
Maxam CSB 5
<<locked>>
61%
46209
82%
**09
100%
ReloadSwiss RS 14
<<locked>>
61%
17724
31%
**9
100%
ReloadSwiss RS 30
<<locked>>
61%
30647
54%
**29
94%
SNPE Vectan A0
<<locked>>
61%
45919
81%
**71
100%
SNPE Vectan BA10
<<locked>>
61%
43134
76%
**63
100%
SNPE Vectan BA6 1/2
<<locked>>
61%
28543
50%
**73
98%
SNPE Vectan BA7 1/2
<<locked>>
61%
45687
81%
**21
100%
Somchem S265
<<locked>>
61%
34142
60%
**81
94%
Vihtavuori N110
<<locked>>
61%
35418
63%
**07
99%
Vihtavuori N32C Tin Star
<<locked>>
61%
30545
54%
**79
100%
Winchester 296
<<locked>>
61%
47311
84%
**08
96%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page