Load data for .260 PICRA + .264 | 108gr | Lapua Scenar

Recommended Powder(s): Accurate 4100, SNPE Vectan BA6 1/2, Vihtavuori N110

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.264 \| 108gr \| Lapua Scenar
Manufacturer SKU:	4PL6020 \| GB464
Bullet Weight:	108gr \| 7.0g
Bullet Diameter:	0.264" \| 6.71mm
Bullet Length:	1.299" \| 33.0mm
Caliber:	.260 PICRA load data
Case Length (l3):	1.515" \| 38.5mm
Cartridge Length (C.O.L.):	2.404" \| 61.1mm
Seated Depth:	0.410" \| 10.4mm
Shank Seated Depth:	0.193" \| 4.9mm
Case Capacity:	38.6 Grains of Water \| 2.51 cm³
Primer Size:	Large Pistol (LP)
Max. allowed Pressure:	56565 psi \| 3900 bar
LID:	LID_B3113_C251
Last updated:	2025-01-01
Recommended Twist Rate:	1:8 - 1:6

Load data for 70 loads in caliber .260 PICRA with .264 | 108gr | Lapua Scenar bullet and 35 powders such as Accurate 4100, SNPE Vectan BA6 1/2, Vihtavuori N110. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	71%	50836	90%	**11	100%
ADI APS 350	<<locked>>	75%	50879	90%	**17	100%
ADI APS 450	<<locked>>	75%	50749	90%	**30	100%
ADI AS 30	<<locked>>	69%	48965	87%	**21	100%
ADI AS 50N	<<locked>>	63%	49617	88%	**53	100%
Accurate 4100 👍	<<locked>>	65%	50125	89%	**03	99%
Accurate No. 11 FS	<<locked>>	72%	50053	88%	**39	96%
Accurate Solo 1000	<<locked>>	67%	49632	88%	**50	100%
Accurate Solo 1250	<<locked>>	66%	50850	90%	**83	100%
Alliant 2400	<<locked>>	63%	50546	89%	**32	100%
Alliant BLUE DOT	<<locked>>	67%	49313	87%	**73	100%
Baschieri & Pellagri 100	<<locked>>	64%	49472	87%	**34	100%
Hodgdon Clays	<<locked>>	73%	50589	89%	**24	100%
Hodgdon H110	<<locked>>	68%	50705	90%	**26	98%
Hodgdon LilGun	<<locked>>	66%	49661	88%	**19	100%
Hodgdon TrailBoss	<<locked>>	96%	31343	55%	**65	100%
Maxam CSB 1	<<locked>>	67%	49313	87%	**70	100%
Maxam CSB 2	<<locked>>	64%	50734	90%	**67	100%
Maxam CSB 3	<<locked>>	66%	49487	87%	**63	100%
Maxam CSB 4	<<locked>>	66%	50575	89%	**53	100%
Maxam CSB 5	<<locked>>	66%	50401	89%	**37	100%
ReloadSwiss RS 14	<<locked>>	96%	31212	55%	**94	100%
ReloadSwiss RS 30	<<locked>>	80%	49342	87%	**32	99%
SNPE Vectan A0	<<locked>>	65%	49458	87%	**06	100%
SNPE Vectan BA10	<<locked>>	70%	50749	90%	**30	100%
SNPE Vectan BA6 1/2 👍	<<locked>>	84%	49661	88%	**67	100%
SNPE Vectan BA7 1/2	<<locked>>	67%	50633	90%	**68	100%
SNPE Vectan BA9 1/2	<<locked>>	63%	50444	89%	**83	100%
Somchem MS200	<<locked>>	63%	50488	89%	**12	100%
Somchem S265	<<locked>>	77%	50459	89%	**29	98%
Vihtavuori 3N38	<<locked>>	64%	49182	87%	**27	100%
Vihtavuori N105	<<locked>>	65%	50140	89%	**34	100%
Vihtavuori N110 👍	<<locked>>	76%	50401	89%	**26	100%
Vihtavuori N32C Tin Star	<<locked>>	89%	50778	90%	**07	100%
Winchester 296	<<locked>>	66%	49487	87%	**32	95%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	38943	69%	**63	100%
ADI APS 350	<<locked>>	61%	38406	68%	**53	100%
ADI APS 450	<<locked>>	61%	38856	69%	**76	100%
ADI AS 30	<<locked>>	61%	41669	74%	**25	100%
ADI AS 50N	<<locked>>	61%	47747	84%	**27	100%
Accurate 4100	<<locked>>	61%	43976	78%	**27	98%
Accurate No. 11 FS	<<locked>>	61%	34780	61%	**93	90%
Accurate Solo 1000	<<locked>>	61%	44034	78%	**88	100%
Accurate Solo 1250	<<locked>>	61%	45150	80%	**14	100%
Alliant 2400	<<locked>>	61%	47268	84%	**80	100%
Alliant BLUE DOT	<<locked>>	61%	41176	73%	**62	100%
Baschieri & Pellagri 100	<<locked>>	61%	45701	81%	**88	100%
Hodgdon Clays	<<locked>>	61%	39537	70%	**83	100%
Hodgdon H110	<<locked>>	61%	40509	72%	**81	95%
Hodgdon LilGun	<<locked>>	61%	41756	74%	**94	99%
Hodgdon TrailBoss	<<locked>>	61%	17071	30%	**9	100%
Maxam CSB 1	<<locked>>	61%	42264	75%	**78	100%
Maxam CSB 2	<<locked>>	61%	46934	83%	**24	100%
Maxam CSB 3	<<locked>>	61%	43932	78%	**94	100%
Maxam CSB 4	<<locked>>	61%	44947	79%	**91	100%
Maxam CSB 5	<<locked>>	61%	44875	79%	**62	100%
ReloadSwiss RS 14	<<locked>>	61%	17172	30%	**8	100%
ReloadSwiss RS 30	<<locked>>	61%	26774	47%	**45	90%
SNPE Vectan A0	<<locked>>	61%	44121	78%	**30	100%
SNPE Vectan BA10	<<locked>>	61%	42264	75%	**29	100%
SNPE Vectan BA6 1/2	<<locked>>	61%	25715	45%	**89	96%
SNPE Vectan BA7 1/2	<<locked>>	61%	43787	77%	**76	100%
SNPE Vectan BA9 1/2	<<locked>>	61%	48501	86%	**60	100%
Somchem MS200	<<locked>>	61%	48631	86%	**90	100%
Somchem S265	<<locked>>	61%	31009	55%	**04	90%
Vihtavuori 3N38	<<locked>>	61%	45774	81%	**94	100%
Vihtavuori N105	<<locked>>	61%	44541	79%	**52	100%
Vihtavuori N110	<<locked>>	61%	31589	56%	**11	96%
Vihtavuori N32C Tin Star	<<locked>>	61%	29921	53%	**29	100%
Winchester 296	<<locked>>	61%	42061	74%	**14	92%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data