top of page

Load data for .260 PICRA + .264 | 100gr | Winchester Pointed Soft Point

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.260 PICRA + .264 | 100gr | Winchester Pointed Soft Point

Load Specifications

Bullet:
.264 | 100gr | Winchester Pointed Soft Point
Bullet Weight:
100gr | 6.5g
Bullet Diameter:
0.264" | 6.71mm
Bullet Length:
1.000" | 25.4mm
Caliber:
.260 PICRA
Case Length (l3):
1.515" | 38.5mm
Cartridge Length (C.O.L.):
2.393" | 60.8mm
Seated Depth:
0.122" | 3.1mm
Shank Seated Depth:
0.122" | 3.1mm
Case Capacity:
38.6 Grains of Water | 2.51 cm³
Primer Size:
Large Pistol (LP)
Max. allowed Pressure:
56565 psi | 3900 bar
LID:
LID_B6614_C251

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 0 loads in caliber .260 PICRA with .264 | 100gr | Winchester Pointed Soft Point bullet and 0 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
70%
50546
89%
**63
100%
ADI APS 350
<<locked>>
74%
49850
88%
**60
100%
ADI APS 450
<<locked>>
73%
49342
87%
**73
100%
ADI AS 30
<<locked>>
69%
49864
88%
**90
100%
ADI AS 50N
<<locked>>
62%
49574
88%
**09
100%
Accurate 4100 👍
<<locked>>
65%
50691
90%
**55
99%
Accurate No. 11 FS
<<locked>>
71%
50067
89%
**72
95%
Accurate Solo 1000
<<locked>>
66%
49371
87%
**03
100%
Accurate Solo 1250
<<locked>>
65%
50241
89%
**42
100%
Alliant BLUE DOT
<<locked>>
67%
49995
88%
**26
100%
Baschieri & Pellagri 100
<<locked>>
65%
50836
90%
**09
100%
Hodgdon Clays
<<locked>>
72%
49676
88%
**60
100%
Hodgdon H110
<<locked>>
67%
50749
90%
**59
97%
Hodgdon LilGun 👍
<<locked>>
65%
50024
88%
**49
100%
Hodgdon TrailBoss
<<locked>>
96%
31169
55%
**07
100%
Maxam CSB 1
<<locked>>
67%
49574
88%
**12
100%
Maxam CSB 3
<<locked>>
67%
50850
90%
**26
100%
Maxam CSB 4
<<locked>>
66%
50285
89%
**06
100%
Maxam CSB 5
<<locked>>
66%
50241
89%
**80
100%
ReloadSwiss RS 14
<<locked>>
95%
30980
55%
**34
100%
ReloadSwiss RS 30
<<locked>>
79%
49777
88%
**55
98%
SNPE Vectan A0
<<locked>>
65%
49443
87%
**55
100%
SNPE Vectan BA10
<<locked>>
69%
50125
89%
**80
100%
SNPE Vectan BA6 1/2
<<locked>>
84%
50691
90%
**42
100%
SNPE Vectan BA7 1/2
<<locked>>
66%
50299
89%
**04
100%
Somchem S265
<<locked>>
76%
49922
88%
**45
96%
Vihtavuori 3N38
<<locked>>
63%
49588
88%
**90
100%
Vihtavuori N105
<<locked>>
64%
49734
88%
**67
100%
Vihtavuori N110 👍
<<locked>>
75%
49937
88%
**52
100%
Vihtavuori N32C Tin Star
<<locked>>
88%
50096
89%
**50
100%
Winchester 296
<<locked>>
65%
49763
88%
**78
94%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
61%
39610
70%
**16
100%
ADI APS 350
<<locked>>
61%
38580
68%
**06
100%
ADI APS 450
<<locked>>
61%
38711
68%
**25
100%
ADI AS 30
<<locked>>
61%
41452
73%
**78
100%
ADI AS 50N
<<locked>>
61%
47674
84%
**86
100%
Accurate 4100
<<locked>>
61%
45092
80%
**83
98%
[Accurate No. 11 FS]*
<<locked>>
61%
35766
63%
**19
88%
Accurate Solo 1000
<<locked>>
61%
44309
78%
**37
100%
Accurate Solo 1250
<<locked>>
61%
45005
80%
**67
100%
Alliant BLUE DOT
<<locked>>
61%
42583
75%
**27
100%
Baschieri & Pellagri 100
<<locked>>
61%
45527
80%
**40
100%
Hodgdon Clays
<<locked>>
61%
39653
70%
**35
100%
Hodgdon H110
<<locked>>
61%
41437
73%
**14
94%
Hodgdon LilGun
<<locked>>
61%
42917
76%
**40
98%
Hodgdon TrailBoss
<<locked>>
61%
17114
30%
**2
100%
Maxam CSB 1
<<locked>>
61%
42960
76%
**40
100%
Maxam CSB 3
<<locked>>
61%
44063
78%
**40
100%
Maxam CSB 4
<<locked>>
61%
45179
80%
**53
100%
Maxam CSB 5
<<locked>>
61%
45107
80%
**30
100%
ReloadSwiss RS 14
<<locked>>
61%
17129
30%
**1
100%
[ReloadSwiss RS 30]*
<<locked>>
61%
27557
49%
**71
88%
SNPE Vectan A0
<<locked>>
61%
44512
79%
**93
100%
SNPE Vectan BA10
<<locked>>
61%
42424
75%
**78
100%
SNPE Vectan BA6 1/2
<<locked>>
61%
26310
47%
**16
94%
SNPE Vectan BA7 1/2
<<locked>>
61%
44106
78%
**29
100%
[Somchem S265]*
<<locked>>
61%
32024
57%
**34
88%
Vihtavuori 3N38
<<locked>>
61%
46267
82%
**47
100%
Vihtavuori N105
<<locked>>
61%
44643
79%
**01
100%
Vihtavuori N110
<<locked>>
61%
32532
58%
**57
95%
Vihtavuori N32C Tin Star
<<locked>>
61%
29921
53%
**71
100%
Winchester 296
<<locked>>
61%
42946
76%
**73
91%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page