top of page

Load data for .260 PICRA + .264 | 100gr | Ferrobull Tripple Expand Jagd

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.260 PICRA + .264 | 100gr | Ferrobull Tripple Expand Jagd

Load Specifications

Bullet:
.264 | 100gr | Ferrobull Tripple Expand Jagd
Manufacturer SKU:
J-264-6,5-100
Bullet Weight:
100gr | 6.5g
Bullet Diameter:
0.264" | 6.71mm
Bullet Length:
1.055" | 26.8mm
Caliber:
.260 PICRA
Case Length (l3):
1.515" | 38.5mm
Cartridge Length (C.O.L.):
2.404" | 61.1mm
Seated Depth:
0.166" | 4.2mm
Shank Seated Depth:
-0.090" | -2.3mm
Case Capacity:
38.6 Grains of Water | 2.51 cm³
Primer Size:
Large Pistol (LP)
Max. allowed Pressure:
56565 psi | 3900 bar
LID:
LID_B9058_C251

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 60 loads in caliber .260 PICRA with .264 | 100gr | Ferrobull Tripple Expand Jagd bullet and 30 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
70%
50618
89%
**77
100%
ADI APS 350
<<locked>>
74%
50140
89%
**76
100%
ADI APS 450
<<locked>>
73%
49429
87%
**86
100%
ADI AS 30
<<locked>>
69%
50169
89%
**03
100%
Accurate 4100 👍
<<locked>>
64%
50314
89%
**55
99%
Accurate No. 11 FS
<<locked>>
70%
50749
90%
**68
95%
Accurate Solo 1000
<<locked>>
67%
50560
89%
**22
100%
Accurate Solo 1250
<<locked>>
65%
50502
89%
**52
100%
Alliant BLUE DOT
<<locked>>
67%
50517
89%
**32
100%
Baschieri & Pellagri 100
<<locked>>
64%
49211
87%
**06
100%
Hodgdon Clays
<<locked>>
72%
49980
88%
**76
100%
Hodgdon H110
<<locked>>
66%
50778
90%
**78
97%
Hodgdon LilGun
<<locked>>
64%
49763
88%
**72
100%
Hodgdon TrailBoss
<<locked>>
95%
31038
55%
**17
100%
Maxam CSB 1
<<locked>>
67%
49835
88%
**42
100%
Maxam CSB 3
<<locked>>
65%
49429
87%
**22
100%
Maxam CSB 4
<<locked>>
66%
50589
89%
**19
100%
Maxam CSB 5
<<locked>>
66%
50488
89%
**96
100%
ReloadSwiss RS 14
<<locked>>
97%
31966
57%
**60
100%
ReloadSwiss RS 30
<<locked>>
79%
50778
90%
**95
99%
SNPE Vectan A0
<<locked>>
65%
49574
88%
**62
100%
SNPE Vectan BA10
<<locked>>
69%
50256
89%
**90
100%
SNPE Vectan BA6 1/2 👍
<<locked>>
83%
50894
90%
**45
100%
SNPE Vectan BA7 1/2
<<locked>>
66%
50169
89%
**17
100%
Somchem S265
<<locked>>
75%
49937
88%
**72
97%
Vihtavuori 3N38
<<locked>>
63%
50299
89%
**03
100%
Vihtavuori N105
<<locked>>
64%
50647
90%
**83
100%
Vihtavuori N110 👍
<<locked>>
74%
50502
89%
**65
100%
Vihtavuori N32C Tin Star
<<locked>>
88%
50024
88%
**50
100%
Winchester 296
<<locked>>
64%
50154
89%
**72
94%

Max Load - Barrel Length: 5.50''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AP 100
<<locked>>
61%
40089
71%
**42
100%
ADI APS 350
<<locked>>
61%
39146
69%
**35
100%
ADI APS 450
<<locked>>
61%
39044
69%
**48
100%
ADI AS 30
<<locked>>
61%
42076
74%
**04
100%
Accurate 4100
<<locked>>
61%
46137
82%
**06
98%
[Accurate No. 11 FS]*
<<locked>>
61%
36724
65%
**45
89%
Accurate Solo 1000
<<locked>>
61%
44063
78%
**50
100%
Accurate Solo 1250
<<locked>>
61%
45469
80%
**80
100%
Alliant BLUE DOT
<<locked>>
61%
43381
77%
**47
100%
Baschieri & Pellagri 100
<<locked>>
61%
45905
81%
**57
100%
Hodgdon Clays
<<locked>>
61%
40437
71%
**48
100%
Hodgdon H110
<<locked>>
61%
42873
76%
**44
94%
Hodgdon LilGun
<<locked>>
61%
44092
78%
**63
99%
Hodgdon TrailBoss
<<locked>>
61%
17405
31%
**5
100%
Maxam CSB 1
<<locked>>
61%
43410
77%
**57
100%
Maxam CSB 3
<<locked>>
61%
44527
79%
**57
100%
Maxam CSB 4
<<locked>>
61%
45571
81%
**57
100%
Maxam CSB 5
<<locked>>
61%
45701
81%
**34
100%
ReloadSwiss RS 14
<<locked>>
61%
17463
31%
**8
100%
[ReloadSwiss RS 30]*
<<locked>>
61%
28674
51%
**01
89%
SNPE Vectan A0
<<locked>>
61%
44817
79%
**06
100%
SNPE Vectan BA10
<<locked>>
61%
42670
75%
**98
100%
SNPE Vectan BA6 1/2
<<locked>>
61%
26992
48%
**35
95%
SNPE Vectan BA7 1/2
<<locked>>
61%
44309
78%
**49
100%
[Somchem S265]*
<<locked>>
61%
32460
57%
**60
89%
Vihtavuori 3N38
<<locked>>
61%
47094
83%
**67
100%
Vihtavuori N105
<<locked>>
61%
45716
81%
**27
100%
Vihtavuori N110
<<locked>>
61%
33243
59%
**73
96%
Vihtavuori N32C Tin Star
<<locked>>
61%
30385
54%
**94
100%
Winchester 296
<<locked>>
61%
44817
79%
**09
92%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page