Load data for .260 PICRA + .264 | 100gr | CutEdge ESP Raptor

Recommended Powder(s):

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.264 \| 100gr \| CutEdge ESP Raptor
Manufacturer SKU:	ESP G100 RAPTOR WoT
Bullet Weight:	100gr \| 6.5g
Bullet Diameter:	0.264" \| 6.71mm
Bullet Length:	<<locked>>
Caliber:	.260 PICRA load data
Case Length (l3):	1.515" \| 38.5mm
Cartridge Length (C.O.L.):	<<locked>>
Seated Depth:	<<locked>>
Shank Seated Depth:	<<locked>>
Case Capacity:	38.6 Grains of Water \| 2.51 cm³
Primer Size:	Large Pistol (LP)
Max. allowed Pressure:	56565 psi \| 3900 bar
LID:	LID_B8425_C251
Last updated:	2026-02-02

Load data for 76 loads in caliber .260 PICRA with .264 | 100gr | CutEdge ESP Raptor bullet and 38 powder(s). The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	50850	90%	**73	100%
ADI APS 350	<<locked>>	75%	50372	89%	**67	101%
ADI APS 450	<<locked>>	74%	49951	88%	**70	100%
ADI AS 30	<<locked>>	70%	49995	88%	**99	100%
ADI AS 50N	<<locked>>	64%	50647	90%	**29	100%
Accurate 4100 👍	<<locked>>	66%	50430	89%	**78	99%
Accurate No. 11 FS	<<locked>>	72%	49719	88%	**68	94%
Accurate Solo 1000	<<locked>>	68%	50705	90%	**19	100%
Accurate Solo 1250	<<locked>>	65%	49690	88%	**29	100%
Alliant 2400	<<locked>>	64%	50821	90%	**78	100%
Alliant BE-86	<<locked>>	65%	50488	89%	**26	100%
Alliant BLUE DOT	<<locked>>	68%	49371	87%	**16	100%
Alliant Herco	<<locked>>	74%	50169	89%	**78	100%
Baschieri & Pellagri 100	<<locked>>	65%	50256	89%	**99	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	80%	50082	89%	**93	100%
Hodgdon Clays	<<locked>>	73%	50169	89%	**67	100%
Hodgdon H110	<<locked>>	68%	50082	89%	**59	96%
Hodgdon LilGun 👍	<<locked>>	67%	49240	87%	**42	99%
Hodgdon TrailBoss	<<locked>>	95%	30313	54%	**98	100%
Maxam CSB 1	<<locked>>	69%	50691	90%	**39	100%
Maxam CSB 2	<<locked>>	64%	50299	89%	**19	100%
Maxam CSB 3	<<locked>>	66%	49313	87%	**06	100%
Maxam CSB 4	<<locked>>	66%	49705	88%	**06	100%
Maxam CSB 5	<<locked>>	66%	49705	88%	**80	100%
Ramshot Enforcer	<<locked>>	63%	50140	89%	**42	100%
ReloadSwiss RS 14	<<locked>>	96%	30676	54%	**27	100%
ReloadSwiss RS 30	<<locked>>	81%	49864	88%	**85	99%
SNPE Vectan A0	<<locked>>	67%	50662	90%	**81	100%
SNPE Vectan BA10	<<locked>>	70%	50807	90%	**86	100%
SNPE Vectan BA6 1/2	<<locked>>	85%	49661	88%	**29	100%
SNPE Vectan BA7 1/2	<<locked>>	67%	50705	90%	**14	100%
Somchem S265	<<locked>>	77%	49545	88%	**42	96%
Vihtavuori 3N38	<<locked>>	65%	49661	88%	**86	100%
Vihtavuori N105	<<locked>>	66%	49588	88%	**90	100%
Vihtavuori N110	<<locked>>	77%	49966	88%	**42	100%
Vihtavuori N320	<<locked>>	63%	50575	89%	**03	100%
Vihtavuori N32C Tin Star	<<locked>>	90%	50705	90%	**53	100%
Winchester 296	<<locked>>	67%	50517	89%	**98	94%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	38072	67%	**93	100%
ADI APS 350	<<locked>>	61%	38580	68%	**19	100%
ADI APS 450	<<locked>>	61%	38711	68%	**29	100%
ADI AS 30	<<locked>>	61%	41466	73%	**81	100%
ADI AS 50N	<<locked>>	61%	47021	83%	**83	100%
Accurate 4100	<<locked>>	61%	42946	76%	**63	97%
[Accurate No. 11 FS]*	<<locked>>	61%	33765	60%	**96	86%
Accurate Solo 1000	<<locked>>	61%	43569	77%	**34	100%
Accurate Solo 1250	<<locked>>	61%	44222	78%	**63	100%
Alliant 2400	<<locked>>	61%	45992	81%	**09	99%
Alliant BE-86	<<locked>>	61%	45672	81%	**60	100%
Alliant BLUE DOT	<<locked>>	61%	40292	71%	**81	100%
Alliant Herco	<<locked>>	61%	36579	65%	**98	100%
Baschieri & Pellagri 100	<<locked>>	61%	44875	79%	**40	100%
Baschieri & Pellagri 102 Pistol	<<locked>>	61%	32576	58%	**60	100%
Hodgdon Clays	<<locked>>	61%	39740	70%	**32	100%
Hodgdon H110	<<locked>>	61%	39044	69%	**94	93%
Hodgdon LilGun	<<locked>>	61%	40437	71%	**17	98%
Hodgdon TrailBoss	<<locked>>	61%	16911	30%	**5	100%
Maxam CSB 1	<<locked>>	61%	42192	75%	**40	100%
Maxam CSB 2	<<locked>>	61%	46746	83%	**86	100%
Maxam CSB 3	<<locked>>	61%	44222	78%	**47	100%
Maxam CSB 4	<<locked>>	61%	44367	78%	**34	100%
Maxam CSB 5	<<locked>>	61%	44556	79%	**24	100%
Ramshot Enforcer	<<locked>>	61%	46862	83%	**93	99%
ReloadSwiss RS 14	<<locked>>	60%	16389	29%	**5	100%
[ReloadSwiss RS 30]*	<<locked>>	61%	25730	45%	**52	86%
SNPE Vectan A0	<<locked>>	61%	43888	78%	**83	100%
SNPE Vectan BA10	<<locked>>	61%	42583	75%	**85	100%
SNPE Vectan BA6 1/2	<<locked>>	61%	24656	44%	**86	93%
SNPE Vectan BA7 1/2	<<locked>>	61%	42801	76%	**19	100%
[Somchem S265]*	<<locked>>	61%	29979	53%	**11	87%
Vihtavuori 3N38	<<locked>>	61%	44744	79%	**17	100%
Vihtavuori N105	<<locked>>	61%	42801	76%	**85	100%
Vihtavuori N110	<<locked>>	61%	30690	54%	**37	94%
Vihtavuori N320	<<locked>>	61%	48617	86%	**80	100%
Vihtavuori N32C Tin Star	<<locked>>	61%	29631	52%	**71	100%
[Winchester 296]*	<<locked>>	61%	40524	72%	**21	89%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data