Load data for .26 Nosler + .264 | 150gr | Sierra MatchKing

.26 Nosler cartridge drawing
Sierra logo

Load Specifications

Bullet Manufacturer:Sierra
Bullet Weight:150 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):2.59"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:100.5 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:24"
Max. allowed Pressure:65,000 psi
Recommended Twist Rate:1:8.0

Load data in caliber .26 Nosler with .264 | 150gr | Sierra MatchKing bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2218, Alliant Reloder-50 and Accurate 8700.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>96%57,334 psi88%2949 fps99%
ADI AR 2217<<locked>>86%55,651 psi86%2910 fps100%
ADI AR 2218<<locked>>90%56,333 psi87%3048 fps99.5%
ADI AR 2225<<locked>>88%56,710 psi87%2949 fps100%
Alliant Reloder-25<<locked>>82%56,492 psi87%2900 fps100%
Alliant Reloder-33<<locked>>86%55,883 psi86%2976 fps99.1%
Alliant Reloder-50<<locked>>90%58,276 psi90%3005 fps99.1%
Baschieri & Pellagri 109<<locked>>82%57,450 psi88%2910 fps99.4%
Bofors RP30<<locked>>84%57,305 psi88%2943 fps100%
Hodgdon H1000<<locked>>84%56,652 psi87%2920 fps100%
Hodgdon Retumbo<<locked>>82%56,652 psi87%3002 fps100%
Hodgdon TrailBossᴾ<<locked>>100%38,885 psi60%1886 fps100%
IMR 7977 Enduron<<locked>>86%58,581 psi90%2877 fps97.2%
IMR 8133 Enduron<<locked>>90%56,768 psi87%2949 fps100%
Lovex D100<<locked>>88%57,885 psi89%2897 fps96.1%
Lovex S071<<locked>>82%57,116 psi88%2815 fps100%
Norma 217<<locked>>90%58,755 psi90%2976 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%40,016 psi62%1929 fps100%
ReloadSwiss RS 76<<locked>>82%57,348 psi88%2986 fps100%
ReloadSwiss RS 80<<locked>>84%57,159 psi88%2976 fps100%
Shooters World 50 BMG<<locked>>88%57,885 psi89%2897 fps96.1%
SNPE Vectan SP 13<<locked>>94%55,985 psi86%2907 fps98.5%
Vihtavuori 20N29<<locked>>98%57,217 psi88%2949 fps97.5%
Vihtavuori N170<<locked>>84%56,855 psi87%2887 fps98.2%
Vihtavuori N565<<locked>>82%58,726 psi90%2946 fps100%
Vihtavuori N568<<locked>>84%57,043 psi88%2969 fps99.8%
Vihtavuori N570<<locked>>86%58,523 psi90%3041 fps99.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 870074.7 gr86%42,119 psi65%2671 fps95.7%
ADI AR 2217<<locked>>80%46,456 psi71%2749 fps99.8%
ADI AR 221871 gr80%41,220 psi63%2733 fps95.9%
ADI AR 2225<<locked>>80%44,498 psi68%2746 fps100%
Alliant Reloder-25<<locked>>80%53,345 psi82%2854 fps100%
Alliant Reloder-33<<locked>>80%46,369 psi71%2799 fps97.4%
Alliant Reloder-5072.1 gr80%43,076 psi66%2717 fps95.9%
Baschieri & Pellagri 109<<locked>>80%54,085 psi83%2854 fps99%
Bofors RP30<<locked>>80%50,879 psi78%2835 fps100%
Hodgdon H1000<<locked>>80%50,140 psi77%2815 fps100%
Hodgdon Retumbo<<locked>>80%53,171 psi82%2946 fps100%
Hodgdon TrailBoss<<locked>>80%29,312 psi45%1683 fps100%
IMR 7977 Enduron<<locked>>80%49,385 psi76%2717 fps95.2%
IMR 8133 Enduron<<locked>>80%42,772 psi66%2694 fps99.2%
Lovex D100<<locked>>86%54,404 psi84%2838 fps95.3%
Lovex S071<<locked>>80%54,085 psi83%2769 fps100%
Norma 217<<locked>>80%44,019 psi68%2726 fps100%
ReloadSwiss RS 14<<locked>>80%30,385 psi47%1726 fps100%
ReloadSwiss RS 76<<locked>>80%53,664 psi83%2933 fps100%
ReloadSwiss RS 80<<locked>>80%50,444 psi78%2861 fps99.6%
Shooters World 50 BMG<<locked>>86%54,404 psi84%2838 fps95.3%
SNPE Vectan SP 13<<locked>>84%42,076 psi65%2641 fps95.2%
Vihtavuori 20N29<<locked>>92%47,747 psi73%2779 fps95.2%
Vihtavuori N170<<locked>>80%50,575 psi78%2776 fps97%
Vihtavuori N565<<locked>>80%55,492 psi85%2897 fps100%
Vihtavuori N568<<locked>>80%50,488 psi78%2858 fps99.3%
Vihtavuori N570<<locked>>80%48,689 psi75%2861 fps97.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .26 Nosler loaded with the .264 | 150gr | Sierra MatchKing. ADI AR 2218 delivers the highest muzzle velocity at 3,048 fps; across all powders the maximum-charge window runs from 1,886 fps to 3,048 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (448 MPa), the top charges use 60–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.264" calls for a 1:8.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2218, Alliant Reloder-50, Accurate 8700 rank at the top here: for .26 Nosler with the .264 | 150gr | Sierra MatchKing they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data