Load data for .26 Nosler + .264 | 144gr | Lapua MaxRange Target OTM

.26 Nosler cartridge drawing
Lapua logo

Load Specifications

Bullet Manufacturer:Lapua
Bullet Weight:144 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):2.59"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:100.5 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:24"
Max. allowed Pressure:65,000 psi
Recommended Twist Rate:1:9.0

Load data in caliber .26 Nosler with .264 | 144gr | Lapua MaxRange Target OTM bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2218, Alliant Reloder-50 and Norma 217.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>96%56,420 psi87%2982 fps98.6%
ADI AR 2217<<locked>>88%58,262 psi90%3002 fps100%
ADI AR 2218<<locked>>90%55,521 psi85%3084 fps99.2%
ADI AR 2225<<locked>>88%55,666 psi86%2986 fps100%
Alliant Reloder-25<<locked>>82%55,738 psi86%2943 fps100%
Alliant Reloder-33<<locked>>88%58,523 psi90%3071 fps99.2%
Alliant Reloder-50<<locked>>90%57,159 psi88%3038 fps98.7%
Baschieri & Pellagri 109<<locked>>82%56,681 psi87%2949 fps99.1%
Bofors RP30<<locked>>84%56,463 psi87%2982 fps100%
Hodgdon H1000<<locked>>84%55,738 psi86%2959 fps100%
Hodgdon Retumbo<<locked>>82%55,521 psi85%3041 fps100%
Hodgdon TrailBossᴾ<<locked>>100%38,841 psi60%1926 fps100%
IMR 7977 Enduron<<locked>>86%58,131 psi89%2920 fps96.8%
IMR 8133 Enduron<<locked>>90%55,985 psi86%2992 fps100%
Lovex S071<<locked>>82%56,376 psi87%2858 fps100%
Norma 217<<locked>>90%57,870 psi89%3018 fps100%
Ramshot Magnum<<locked>>82%57,928 psi89%2956 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%39,958 psi61%1969 fps100%
ReloadSwiss RS 76<<locked>>82%56,260 psi87%3025 fps100%
ReloadSwiss RS 80<<locked>>84%56,318 psi87%3012 fps99.9%
SNPE Vectan SP 13<<locked>>96%58,334 psi90%2992 fps98.6%
Vihtavuori 20N29<<locked>>98%56,333 psi87%2979 fps96.9%
Vihtavuori N170<<locked>>84%56,072 psi86%2923 fps97.8%
Vihtavuori N565<<locked>>82%57,914 psi89%2989 fps100%
Vihtavuori N568<<locked>>84%56,086 psi86%3009 fps99.7%
Vihtavuori N570<<locked>>86%57,638 psi89%3074 fps98.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>88%44,092 psi68%2756 fps95.8%
ADI AR 2217<<locked>>80%45,600 psi70%2785 fps99.5%
ADI AR 221872 gr80%40,567 psi62%2759 fps95.1%
ADI AR 2225<<locked>>80%43,700 psi67%2779 fps100%
Alliant Reloder-25<<locked>>80%52,460 psi81%2894 fps100%
Alliant Reloder-33<<locked>>80%45,484 psi70%2828 fps96.8%
Alliant Reloder-5073.1 gr80%42,322 psi65%2746 fps95.2%
Baschieri & Pellagri 109<<locked>>80%53,432 psi82%2894 fps98.7%
Bofors RP30<<locked>>80%50,212 psi77%2874 fps99.9%
Hodgdon H1000<<locked>>80%49,211 psi76%2851 fps100%
Hodgdon Retumbo<<locked>>80%52,098 psi80%2986 fps100%
Hodgdon TrailBoss<<locked>>80%29,399 psi45%1722 fps100%
IMR 7977 Enduron<<locked>>82%51,706 psi80%2805 fps95.4%
IMR 8133 Enduron<<locked>>80%42,018 psi65%2726 fps98.9%
Lovex S071<<locked>>80%53,403 psi82%2812 fps100%
Norma 21766.5 gr80%43,163 psi66%2759 fps100%
Ramshot Magnum<<locked>>80%54,317 psi84%2900 fps100%
ReloadSwiss RS 14<<locked>>80%30,298 psi47%1762 fps100%
ReloadSwiss RS 76<<locked>>80%52,634 psi81%2966 fps100%
ReloadSwiss RS 80<<locked>>80%49,501 psi76%2894 fps99.3%
SNPE Vectan SP 13<<locked>>86%43,787 psi67%2723 fps95.3%
Vihtavuori 20N29<<locked>>94%49,835 psi77%2864 fps95.3%
Vihtavuori N170<<locked>>80%49,951 psi77%2812 fps96.5%
Vihtavuori N565<<locked>>80%54,737 psi84%2936 fps99.9%
Vihtavuori N568<<locked>>80%49,705 psi76%2894 fps98.9%
Vihtavuori N570<<locked>>80%47,906 psi74%2894 fps97%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .26 Nosler loaded with the .264 | 144gr | Lapua MaxRange Target OTM. ADI AR 2218 delivers the highest muzzle velocity at 3,084 fps; across all powders the maximum-charge window runs from 1,926 fps to 3,084 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (448 MPa), the top charges use 60–90 %, leaving at least 10 % headroom. The 144.0 gr projectile in 0.264" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2218, Alliant Reloder-50, Norma 217 rank at the top here: for .26 Nosler with the .264 | 144gr | Lapua MaxRange Target OTM they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data