Load data for .26 Nosler + .264 | 144gr | Berger Long Range Hybrid Target

.26 Nosler cartridge drawing
Berger logo

Load Specifications

Bullet Manufacturer:Berger
Bullet Weight:144 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):2.59"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:100.5 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:24"
Max. allowed Pressure:65,000 psi
Recommended Twist Rate:1:8.5

Load data in caliber .26 Nosler with .264 | 144gr | Berger Long Range Hybrid Target bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2218, Alliant Reloder-50 and Norma 217.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>96%56,159 psi86%2979 fps98.5%
ADI AR 2217<<locked>>88%57,928 psi89%2995 fps100%
ADI AR 2218<<locked>>92%58,784 psi90%3140 fps99.5%
ADI AR 2225<<locked>>90%58,798 psi90%3035 fps100%
Alliant Reloder-25<<locked>>84%58,813 psi90%2992 fps100%
Alliant Reloder-33<<locked>>88%58,175 psi89%3068 fps99.2%
Alliant Reloder-50<<locked>>90%56,855 psi87%3035 fps98.7%
Baschieri & Pellagri 109<<locked>>82%56,405 psi87%2946 fps99.1%
Bofors RP15<<locked>>82%58,566 psi90%2995 fps100%
Bofors RP30<<locked>>84%56,086 psi86%2976 fps100%
Hodgdon H1000<<locked>>84%55,637 psi86%2956 fps100%
Hodgdon Retumbo<<locked>>82%55,288 psi85%3038 fps100%
Hodgdon TrailBossᴾ<<locked>>100%38,740 psi60%1923 fps100%
IMR 7977 Enduron<<locked>>86%57,841 psi89%2913 fps96.7%
IMR 8133 Enduron<<locked>>90%55,666 psi86%2986 fps100%
Lovex S071<<locked>>82%56,043 psi86%2851 fps100%
Norma 217<<locked>>90%57,537 psi89%3012 fps100%
Ramshot Magnum<<locked>>82%57,638 psi89%2949 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%40,045 psi62%1969 fps100%
ReloadSwiss RS 76<<locked>>82%55,898 psi86%3022 fps100%
ReloadSwiss RS 80<<locked>>84%55,753 psi86%3005 fps99.8%
SNPE Vectan SP 13<<locked>>96%58,059 psi89%2989 fps98.5%
Vihtavuori 20N29<<locked>>98%55,840 psi86%2972 fps96.8%
Vihtavuori N170<<locked>>84%55,811 psi86%2917 fps97.7%
Vihtavuori N565<<locked>>82%57,827 psi89%2986 fps100%
Vihtavuori N568<<locked>>84%55,767 psi86%3002 fps99.6%
Vihtavuori N570<<locked>>86%57,276 psi88%3071 fps98.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>88%43,671 psi67%2749 fps95.7%
ADI AR 2217<<locked>>80%45,469 psi70%2779 fps99.5%
ADI AR 221873.4 gr82%42,888 psi66%2818 fps96%
ADI AR 2225<<locked>>80%43,511 psi67%2776 fps100%
Alliant Reloder-25<<locked>>80%52,098 psi80%2887 fps100%
Alliant Reloder-33<<locked>>80%45,179 psi70%2822 fps96.7%
Alliant Reloder-5072.7 gr80%42,018 psi65%2740 fps95.1%
Baschieri & Pellagri 109<<locked>>80%53,374 psi82%2890 fps98.7%
Bofors RP15<<locked>>80%55,448 psi85%2946 fps100%
Bofors RP30<<locked>>80%49,908 psi77%2867 fps99.9%
Hodgdon H1000<<locked>>80%49,052 psi75%2848 fps100%
Hodgdon Retumbo<<locked>>80%51,895 psi80%2979 fps100%
Hodgdon TrailBoss<<locked>>80%29,283 psi45%1719 fps100%
IMR 7977 Enduron<<locked>>82%51,430 psi79%2799 fps95.3%
IMR 8133 Enduron<<locked>>80%41,698 psi64%2723 fps98.8%
Lovex S071<<locked>>80%53,229 psi82%2808 fps100%
Norma 21766.2 gr80%42,975 psi66%2756 fps99.9%
Ramshot Magnum<<locked>>80%54,027 psi83%2897 fps100%
ReloadSwiss RS 14<<locked>>80%30,327 psi47%1762 fps100%
ReloadSwiss RS 76<<locked>>80%52,257 psi80%2963 fps100%
ReloadSwiss RS 80<<locked>>80%49,182 psi76%2887 fps99.2%
SNPE Vectan SP 13<<locked>>86%43,540 psi67%2717 fps95.2%
Vihtavuori 20N29<<locked>>94%49,588 psi76%2861 fps95.2%
Vihtavuori N170<<locked>>80%49,705 psi76%2805 fps96.4%
Vihtavuori N565<<locked>>80%54,447 psi84%2930 fps99.9%
Vihtavuori N568<<locked>>80%49,429 psi76%2887 fps98.9%
Vihtavuori N570<<locked>>80%47,587 psi73%2887 fps96.9%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .26 Nosler loaded with the .264 | 144gr | Berger Long Range Hybrid Target. ADI AR 2218 delivers the highest muzzle velocity at 3,140 fps; across all powders the maximum-charge window runs from 1,923 fps to 3,140 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (448 MPa), the top charges use 60–90 %, leaving at least 10 % headroom. The 144.0 gr projectile in 0.264" calls for a 1:8.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2218, Alliant Reloder-50, Norma 217 rank at the top here: for .26 Nosler with the .264 | 144gr | Berger Long Range Hybrid Target they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data