Load data for .26 Nosler + .264 | 143gr | Hornady ELD-X

.26 Nosler cartridge drawing
Hornady logo

Load Specifications

Bullet Manufacturer:Hornady
Bullet Weight:143 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):2.59"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:100.5 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:24"
Max. allowed Pressure:65,000 psi
Recommended Twist Rate:1:8.5

Load data in caliber .26 Nosler with .264 | 143gr | Hornady ELD-X bullet and 28 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2218, Alliant Reloder-50 and Norma 217.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>96%55,825 psi86%2982 fps98.4%
ADI AR 2217<<locked>>88%57,609 psi89%3002 fps100%
ADI AR 2218<<locked>>92%58,436 psi90%3146 fps99.5%
ADI AR 2225<<locked>>90%58,450 psi90%3038 fps100%
Alliant Reloder-25<<locked>>84%58,523 psi90%2995 fps100%
Alliant Reloder-33<<locked>>88%57,827 psi89%3068 fps99.1%
Alliant Reloder-50<<locked>>90%56,521 psi87%3035 fps98.6%
Baschieri & Pellagri 109<<locked>>82%56,188 psi86%2949 fps99%
Bofors RP15<<locked>>82%58,305 psi90%2999 fps100%
Bofors RP30<<locked>>84%55,898 psi86%2982 fps100%
Hodgdon H1000<<locked>>84%55,332 psi85%2963 fps100%
Hodgdon Retumbo<<locked>>84%58,566 psi90%3100 fps100%
Hodgdon TrailBossᴾ<<locked>>100%38,725 psi60%1929 fps100%
IMR 7977 Enduron<<locked>>86%57,609 psi89%2917 fps96.6%
IMR 8133 Enduron<<locked>>92%58,537 psi90%3041 fps100%
Lovex S071<<locked>>82%55,796 psi86%2858 fps100%
Norma 217<<locked>>90%57,203 psi88%3015 fps100%
Ramshot Magnum<<locked>>82%57,334 psi88%2956 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%40,030 psi62%1975 fps100%
ReloadSwiss RS 76<<locked>>82%55,550 psi85%3025 fps100%
ReloadSwiss RS 80<<locked>>84%55,622 psi86%3012 fps99.8%
SNPE Vectan SP 13<<locked>>96%57,740 psi89%2992 fps98.4%
Vihtavuori 20N29<<locked>>98%55,506 psi85%2976 fps96.6%
Vihtavuori N165<<locked>>82%58,769 psi90%2927 fps100%
Vihtavuori N170<<locked>>84%55,550 psi85%2920 fps97.6%
Vihtavuori N565<<locked>>82%57,551 psi89%2992 fps100%
Vihtavuori N568<<locked>>84%55,477 psi85%3005 fps99.6%
Vihtavuori N570<<locked>>86%56,956 psi88%3074 fps98.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>88%43,410 psi67%2749 fps95.5%
ADI AR 2217<<locked>>80%45,223 psi70%2785 fps99.4%
ADI AR 221873.4 gr82%42,641 psi66%2822 fps95.8%
ADI AR 2225<<locked>>80%43,265 psi67%2779 fps100%
Alliant Reloder-25<<locked>>80%51,880 psi80%2894 fps100%
Alliant Reloder-33<<locked>>80%44,918 psi69%2825 fps96.5%
Alliant Reloder-5074.5 gr82%44,295 psi68%2799 fps95.8%
Baschieri & Pellagri 109<<locked>>80%53,142 psi82%2897 fps98.6%
Bofors RP15<<locked>>80%55,201 psi85%2949 fps100%
Bofors RP30<<locked>>80%49,661 psi76%2871 fps99.8%
Hodgdon H1000<<locked>>80%48,791 psi75%2851 fps99.9%
Hodgdon Retumbo<<locked>>80%51,576 psi79%2986 fps100%
Hodgdon TrailBoss<<locked>>80%29,269 psi45%1722 fps100%
IMR 7977 Enduron<<locked>>82%51,227 psi79%2805 fps95.1%
IMR 8133 Enduron<<locked>>80%41,466 psi64%2723 fps98.7%
Lovex S071<<locked>>80%53,040 psi82%2815 fps100%
Norma 21766.2 gr80%42,714 psi66%2759 fps99.9%
Ramshot Magnum<<locked>>80%53,751 psi83%2900 fps100%
ReloadSwiss RS 14<<locked>>80%30,313 psi47%1768 fps100%
ReloadSwiss RS 76<<locked>>80%51,938 psi80%2966 fps100%
ReloadSwiss RS 80<<locked>>80%48,892 psi75%2890 fps99.1%
SNPE Vectan SP 13<<locked>>86%43,294 psi67%2720 fps95%
Vihtavuori 20N29<<locked>>94%49,284 psi76%2861 fps95%
Vihtavuori N165<<locked>>80%55,419 psi85%2874 fps100%
Vihtavuori N170<<locked>>80%49,487 psi76%2812 fps96.3%
Vihtavuori N565<<locked>>80%54,186 psi83%2936 fps99.9%
Vihtavuori N568<<locked>>80%49,168 psi76%2890 fps98.8%
Vihtavuori N570<<locked>>80%47,311 psi73%2890 fps96.8%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 28 powders for .26 Nosler loaded with the .264 | 143gr | Hornady ELD-X. ADI AR 2218 delivers the highest muzzle velocity at 3,146 fps; across all powders the maximum-charge window runs from 1,929 fps to 3,146 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 28 of the 28 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (448 MPa), the top charges use 60–90 %, leaving at least 10 % headroom. The 143.0 gr projectile in 0.264" calls for a 1:8.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2218, Alliant Reloder-50, Norma 217 rank at the top here: for .26 Nosler with the .264 | 143gr | Hornady ELD-X they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data