Load data for .26 Nosler + .264 | 140gr | Speer Gold Dot

.26 Nosler cartridge drawing
Speer logo

Load Specifications

Bullet Manufacturer:Speer
Bullet Weight:140 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):2.59"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:100.5 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:24"
Max. allowed Pressure:65,000 psi
Recommended Twist Rate:1:10.0

Load data in caliber .26 Nosler with .264 | 140gr | Speer Gold Dot bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2218, Alliant Reloder-50 and Norma 217.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>96%56,289 psi87%3015 fps98.4%
ADI AR 2217<<locked>>88%58,102 psi89%3038 fps100%
ADI AR 2218<<locked>>90%55,332 psi85%3114 fps99%
ADI AR 2225<<locked>>88%55,463 psi85%3018 fps100%
Alliant Reloder-25<<locked>>82%55,492 psi85%2979 fps100%
Alliant Reloder-33<<locked>>88%58,262 psi90%3100 fps99.1%
Alliant Reloder-50<<locked>>90%56,927 psi88%3064 fps98.5%
Baschieri & Pellagri 109<<locked>>82%56,594 psi87%2982 fps99%
Bofors RP15<<locked>>82%58,740 psi90%3035 fps100%
Bofors RP30<<locked>>84%56,188 psi86%3012 fps100%
Hodgdon H1000<<locked>>84%55,622 psi86%2992 fps100%
Hodgdon Retumbo<<locked>>82%55,419 psi85%3077 fps100%
Hodgdon TrailBossᴾ<<locked>>100%38,725 psi60%1952 fps100%
IMR 7977 Enduron<<locked>>86%57,812 psi89%2946 fps96.5%
IMR 8133 Enduron<<locked>>90%55,724 psi86%3022 fps100%
Lovex S071<<locked>>82%56,086 psi86%2890 fps100%
Norma 217<<locked>>90%57,638 psi89%3048 fps100%
Ramshot Magnum<<locked>>82%57,769 psi89%2989 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%39,987 psi62%2001 fps100%
ReloadSwiss RS 76<<locked>>82%55,941 psi86%3058 fps100%
ReloadSwiss RS 80<<locked>>84%55,985 psi86%3041 fps99.8%
SNPE Vectan SP 13<<locked>>96%58,291 psi90%3025 fps98.4%
Vihtavuori 20N29<<locked>>98%56,130 psi86%3009 fps96.6%
Vihtavuori N170<<locked>>84%55,883 psi86%2953 fps97.6%
Vihtavuori N565<<locked>>82%57,856 psi89%3025 fps100%
Vihtavuori N568<<locked>>84%55,912 psi86%3038 fps99.6%
Vihtavuori N570<<locked>>86%57,348 psi88%3107 fps98.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>88%43,830 psi67%2779 fps95.4%
ADI AR 2217<<locked>>80%45,484 psi70%2815 fps99.4%
ADI AR 221875 gr82%43,004 psi66%2851 fps95.7%
ADI AR 2225<<locked>>80%43,482 psi67%2808 fps100%
Alliant Reloder-25<<locked>>80%52,301 psi80%2927 fps100%
Alliant Reloder-33<<locked>>80%45,368 psi70%2854 fps96.5%
Alliant Reloder-5076.1 gr82%44,657 psi69%2828 fps95.7%
Baschieri & Pellagri 109<<locked>>80%53,359 psi82%2927 fps98.5%
Bofors RP15<<locked>>80%55,419 psi85%2979 fps100%
Bofors RP30<<locked>>80%50,082 psi77%2907 fps99.8%
Hodgdon H1000<<locked>>80%49,037 psi75%2881 fps99.9%
Hodgdon Retumbo<<locked>>80%51,851 psi80%3018 fps100%
Hodgdon TrailBoss<<locked>>80%29,298 psi45%1749 fps100%
IMR 7977 Enduron<<locked>>82%51,561 psi79%2835 fps95.1%
IMR 8133 Enduron<<locked>>80%41,887 psi64%2756 fps98.7%
Lovex S071<<locked>>80%53,156 psi82%2844 fps100%
Norma 21767.6 gr80%43,033 psi66%2789 fps99.9%
Ramshot Magnum<<locked>>80%54,230 psi83%2933 fps100%
ReloadSwiss RS 14<<locked>>80%30,327 psi47%1791 fps100%
ReloadSwiss RS 76<<locked>>80%52,518 psi81%3002 fps100%
ReloadSwiss RS 80<<locked>>80%49,385 psi76%2923 fps99.1%
SNPE Vectan SP 13<<locked>>86%43,598 psi67%2749 fps95%
Vihtavuori 20N29<<locked>>94%49,763 psi77%2894 fps95%
Vihtavuori N170<<locked>>80%49,748 psi77%2838 fps96.2%
Vihtavuori N565<<locked>>80%54,491 psi84%2966 fps99.9%
Vihtavuori N568<<locked>>80%49,487 psi76%2920 fps98.7%
Vihtavuori N570<<locked>>80%47,630 psi73%2920 fps96.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .26 Nosler loaded with the .264 | 140gr | Speer Gold Dot. ADI AR 2218 delivers the highest muzzle velocity at 3,114 fps; across all powders the maximum-charge window runs from 1,952 fps to 3,114 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (448 MPa), the top charges use 60–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.264" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2218, Alliant Reloder-50, Norma 217 rank at the top here: for .26 Nosler with the .264 | 140gr | Speer Gold Dot they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data