Load data for .26 Nosler + .264 | 140gr | Speer Deep Curl Soft Point

.26 Nosler cartridge drawing
Speer logo

Load Specifications

Bullet Manufacturer:Speer
Bullet Weight:140 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):2.59"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:100.5 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:24"
Max. allowed Pressure:65,000 psi
Recommended Twist Rate:1:10.5

Load data in caliber .26 Nosler with .264 | 140gr | Speer Deep Curl Soft Point bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2218, Alliant Reloder-50 and Norma 217.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>96%56,579 psi87%3018 fps98.5%
ADI AR 2217<<locked>>88%58,421 psi90%3038 fps100%
ADI AR 2218<<locked>>90%55,593 psi86%3120 fps99%
ADI AR 2225<<locked>>88%55,767 psi86%3022 fps100%
Alliant Reloder-25<<locked>>82%55,811 psi86%2982 fps100%
Alliant Reloder-33<<locked>>88%58,755 psi90%3107 fps99.1%
Alliant Reloder-50<<locked>>90%57,406 psi88%3074 fps98.6%
Baschieri & Pellagri 109<<locked>>82%56,840 psi87%2989 fps99%
Bofors RP30<<locked>>84%56,536 psi87%3018 fps100%
Hodgdon H1000<<locked>>84%55,970 psi86%2999 fps100%
Hodgdon Retumbo<<locked>>82%55,535 psi85%3074 fps100%
Hodgdon TrailBossᴾ<<locked>>100%38,812 psi60%1955 fps100%
IMR 7977 Enduron<<locked>>86%58,073 psi89%2949 fps96.6%
IMR 8133 Enduron<<locked>>90%56,115 psi86%3028 fps100%
Lovex S071<<locked>>82%56,405 psi87%2894 fps100%
Norma 217<<locked>>90%58,001 psi89%3054 fps100%
Ramshot Magnum<<locked>>82%58,088 psi89%2992 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%39,900 psi61%2001 fps100%
ReloadSwiss RS 76<<locked>>82%56,376 psi87%3064 fps100%
ReloadSwiss RS 80<<locked>>84%56,333 psi87%3045 fps99.8%
SNPE Vectan SP 13<<locked>>96%58,552 psi90%3028 fps98.5%
Vihtavuori 20N29<<locked>>98%56,405 psi87%3012 fps96.7%
Vihtavuori N170<<locked>>84%56,130 psi86%2956 fps97.6%
Vihtavuori N565<<locked>>82%58,146 psi89%3028 fps100%
Vihtavuori N568<<locked>>84%56,202 psi86%3041 fps99.6%
Vihtavuori N570<<locked>>86%57,740 psi89%3110 fps98.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>88%44,063 psi68%2782 fps95.5%
ADI AR 2217<<locked>>80%45,788 psi70%2818 fps99.4%
ADI AR 221875.4 gr82%43,236 psi67%2858 fps95.9%
ADI AR 2225<<locked>>80%43,816 psi67%2812 fps100%
Alliant Reloder-25<<locked>>80%52,475 psi81%2927 fps100%
Alliant Reloder-33<<locked>>80%45,643 psi70%2861 fps96.6%
Alliant Reloder-5076.5 gr82%44,991 psi69%2835 fps95.8%
Baschieri & Pellagri 109<<locked>>80%53,635 psi83%2930 fps98.6%
Bofors RP30<<locked>>80%50,256 psi77%2910 fps99.8%
Hodgdon H1000<<locked>>80%49,385 psi76%2887 fps99.9%
Hodgdon Retumbo<<locked>>80%52,228 psi80%3018 fps100%
Hodgdon TrailBoss<<locked>>80%29,414 psi45%1752 fps100%
IMR 7977 Enduron<<locked>>82%51,793 psi80%2841 fps95.2%
IMR 8133 Enduron<<locked>>80%42,018 psi65%2756 fps98.7%
Lovex S071<<locked>>80%53,447 psi82%2848 fps100%
Norma 21768 gr80%43,337 psi67%2792 fps99.9%
Ramshot Magnum<<locked>>80%54,389 psi84%2936 fps100%
ReloadSwiss RS 14<<locked>>80%30,284 psi47%1791 fps100%
ReloadSwiss RS 76<<locked>>80%52,837 psi81%3005 fps100%
ReloadSwiss RS 80<<locked>>80%49,676 psi76%2927 fps99.1%
SNPE Vectan SP 13<<locked>>86%43,903 psi68%2753 fps95.1%
Vihtavuori 20N29<<locked>>94%49,980 psi77%2897 fps95.1%
Vihtavuori N170<<locked>>80%49,951 psi77%2841 fps96.3%
Vihtavuori N565<<locked>>80%54,810 psi84%2972 fps99.9%
Vihtavuori N568<<locked>>80%49,777 psi77%2927 fps98.8%
Vihtavuori N570<<locked>>80%47,979 psi74%2927 fps96.8%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .26 Nosler loaded with the .264 | 140gr | Speer Deep Curl Soft Point. ADI AR 2218 delivers the highest muzzle velocity at 3,120 fps; across all powders the maximum-charge window runs from 1,955 fps to 3,120 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (448 MPa), the top charges use 60–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.264" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2218, Alliant Reloder-50, Norma 217 rank at the top here: for .26 Nosler with the .264 | 140gr | Speer Deep Curl Soft Point they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data