Load data for .26 Nosler + .264 | 140gr | Remington PSP Core-Lokt

.26 Nosler cartridge drawing
Remington logo

Load Specifications

Bullet Manufacturer:Remington
Bullet Weight:140 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):2.59"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:100.5 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:24"
Max. allowed Pressure:65,000 psi
Recommended Twist Rate:1:10.5

Load data in caliber .26 Nosler with .264 | 140gr | Remington PSP Core-Lokt bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2218, Alliant Reloder-50 and Norma 217.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>96%56,478 psi87%3015 fps98.5%
ADI AR 2217<<locked>>88%58,334 psi90%3038 fps100%
ADI AR 2218<<locked>>90%55,492 psi85%3117 fps99%
ADI AR 2225<<locked>>88%55,651 psi86%3022 fps100%
Alliant Reloder-25<<locked>>82%55,680 psi86%2982 fps100%
Alliant Reloder-33<<locked>>88%58,436 psi90%3104 fps99.1%
Alliant Reloder-50<<locked>>90%57,087 psi88%3068 fps98.6%
Baschieri & Pellagri 109<<locked>>82%56,768 psi87%2986 fps99%
Bofors RP30<<locked>>84%56,333 psi87%3015 fps100%
Hodgdon H1000<<locked>>84%55,825 psi86%2995 fps100%
Hodgdon Retumbo<<locked>>82%55,390 psi85%3074 fps100%
Hodgdon TrailBossᴾ<<locked>>100%38,783 psi60%1955 fps100%
IMR 7977 Enduron<<locked>>86%58,001 psi89%2949 fps96.6%
IMR 8133 Enduron<<locked>>90%55,767 psi86%3022 fps100%
Lovex S071<<locked>>82%56,246 psi87%2894 fps100%
Norma 217<<locked>>90%57,696 psi89%3048 fps100%
Ramshot Magnum<<locked>>82%58,001 psi89%2992 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%39,885 psi61%1998 fps100%
ReloadSwiss RS 76<<locked>>82%56,188 psi86%3061 fps100%
ReloadSwiss RS 80<<locked>>84%56,202 psi86%3045 fps99.8%
SNPE Vectan SP 13<<locked>>96%58,479 psi90%3028 fps98.5%
Vihtavuori 20N29<<locked>>98%56,333 psi87%3009 fps96.7%
Vihtavuori N170<<locked>>84%56,072 psi86%2956 fps97.6%
Vihtavuori N565<<locked>>82%58,044 psi89%3028 fps100%
Vihtavuori N568<<locked>>84%56,043 psi86%3041 fps99.6%
Vihtavuori N570<<locked>>86%57,566 psi89%3110 fps98.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>88%43,990 psi68%2782 fps95.5%
ADI AR 2217<<locked>>80%45,658 psi70%2818 fps99.4%
ADI AR 221875.1 gr82%42,960 psi66%2851 fps95.8%
ADI AR 2225<<locked>>80%43,685 psi67%2812 fps100%
Alliant Reloder-25<<locked>>80%52,330 psi81%2927 fps100%
Alliant Reloder-33<<locked>>80%45,498 psi70%2858 fps96.5%
Alliant Reloder-5076.3 gr82%44,817 psi69%2831 fps95.7%
Baschieri & Pellagri 109<<locked>>80%53,548 psi82%2930 fps98.6%
Bofors RP30<<locked>>80%50,038 psi77%2904 fps99.8%
Hodgdon H1000<<locked>>80%49,168 psi76%2881 fps99.9%
Hodgdon Retumbo<<locked>>80%52,054 psi80%3018 fps100%
Hodgdon TrailBoss<<locked>>80%29,356 psi45%1749 fps100%
IMR 7977 Enduron<<locked>>82%51,692 psi80%2838 fps95.1%
IMR 8133 Enduron<<locked>>80%41,887 psi64%2756 fps98.7%
Lovex S071<<locked>>80%53,330 psi82%2844 fps100%
Norma 21767.8 gr80%43,192 psi66%2792 fps99.9%
Ramshot Magnum<<locked>>80%54,244 psi83%2933 fps100%
ReloadSwiss RS 14<<locked>>80%30,240 psi47%1791 fps100%
ReloadSwiss RS 76<<locked>>80%52,678 psi81%3002 fps100%
ReloadSwiss RS 80<<locked>>80%49,516 psi76%2927 fps99.1%
SNPE Vectan SP 13<<locked>>86%43,772 psi67%2749 fps95%
Vihtavuori 20N29<<locked>>94%49,893 psi77%2894 fps95%
Vihtavuori N170<<locked>>80%49,879 psi77%2841 fps96.3%
Vihtavuori N565<<locked>>80%54,708 psi84%2969 fps99.9%
Vihtavuori N568<<locked>>80%49,676 psi76%2923 fps98.8%
Vihtavuori N570<<locked>>80%47,819 psi74%2923 fps96.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .26 Nosler loaded with the .264 | 140gr | Remington PSP Core-Lokt. ADI AR 2218 delivers the highest muzzle velocity at 3,117 fps; across all powders the maximum-charge window runs from 1,955 fps to 3,117 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (448 MPa), the top charges use 60–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.264" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2218, Alliant Reloder-50, Norma 217 rank at the top here: for .26 Nosler with the .264 | 140gr | Remington PSP Core-Lokt they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data