Load data for .26 Nosler + .264 | 140gr | Hornady InterLock

.26 Nosler cartridge drawing
Hornady logo

Load Specifications

Bullet Manufacturer:Hornady
Bullet Weight:140 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):2.59"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:100.5 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:24"
Max. allowed Pressure:65,000 psi
Recommended Twist Rate:1:10.0

Load data in caliber .26 Nosler with .264 | 140gr | Hornady InterLock bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2218, Alliant Reloder-50 and Norma 217.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>96%56,057 psi86%3009 fps98.4%
ADI AR 2217<<locked>>88%57,943 psi89%3035 fps100%
ADI AR 2218<<locked>>92%58,726 psi90%3173 fps99.4%
ADI AR 2225<<locked>>90%58,740 psi90%3068 fps100%
Alliant Reloder-25<<locked>>84%58,711 psi90%3025 fps100%
Alliant Reloder-33<<locked>>88%58,131 psi89%3097 fps99%
Alliant Reloder-50<<locked>>90%56,797 psi87%3064 fps98.5%
Baschieri & Pellagri 109<<locked>>82%56,449 psi87%2979 fps99%
Bofors RP15<<locked>>82%58,639 psi90%3031 fps100%
Bofors RP30<<locked>>84%56,014 psi86%3009 fps100%
Hodgdon H1000<<locked>>84%55,492 psi85%2992 fps100%
Hodgdon Retumbo<<locked>>84%58,769 psi90%3127 fps100%
Hodgdon TrailBossᴾ<<locked>>100%38,711 psi60%1952 fps100%
IMR 7977 Enduron<<locked>>86%57,754 psi89%2946 fps96.5%
IMR 8133 Enduron<<locked>>92%58,784 psi90%3071 fps100%
Lovex S071<<locked>>82%55,956 psi86%2887 fps100%
Norma 217<<locked>>90%57,305 psi88%3045 fps100%
Ramshot Magnum<<locked>>82%57,479 psi88%2986 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%39,972 psi61%1998 fps100%
ReloadSwiss RS 76<<locked>>82%55,840 psi86%3054 fps100%
ReloadSwiss RS 80<<locked>>84%55,840 psi86%3041 fps99.8%
SNPE Vectan SP 13<<locked>>96%58,044 psi89%3018 fps98.4%
Vihtavuori 20N29<<locked>>98%55,912 psi86%3002 fps96.5%
Vihtavuori N170<<locked>>84%55,811 psi86%2949 fps97.5%
Vihtavuori N565<<locked>>82%57,740 psi89%3022 fps100%
Vihtavuori N568<<locked>>84%55,782 psi86%3035 fps99.5%
Vihtavuori N570<<locked>>86%57,261 psi88%3104 fps98.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>88%43,743 psi67%2776 fps95.4%
ADI AR 2217<<locked>>80%45,368 psi70%2812 fps99.4%
ADI AR 221874.7 gr82%42,743 psi66%2844 fps95.6%
ADI AR 2225<<locked>>80%43,366 psi67%2805 fps100%
Alliant Reloder-25<<locked>>80%52,185 psi80%2923 fps100%
Alliant Reloder-33<<locked>>80%45,063 psi69%2848 fps96.4%
Alliant Reloder-5075.9 gr82%44,512 psi68%2825 fps95.6%
Baschieri & Pellagri 109<<locked>>80%53,272 psi82%2923 fps98.5%
Bofors RP15<<locked>>80%55,303 psi85%2979 fps100%
Bofors RP30<<locked>>80%49,748 psi77%2900 fps99.8%
Hodgdon H1000<<locked>>80%48,878 psi75%2877 fps99.9%
Hodgdon Retumbo<<locked>>80%51,721 psi80%3015 fps100%
Hodgdon TrailBoss<<locked>>80%29,399 psi45%1749 fps100%
IMR 7977 Enduron<<locked>>82%51,416 psi79%2831 fps95%
IMR 8133 Enduron<<locked>>80%41,771 psi64%2753 fps98.6%
Lovex S071<<locked>>80%53,011 psi82%2841 fps100%
Norma 21767.4 gr80%42,873 psi66%2785 fps99.9%
Ramshot Magnum<<locked>>80%53,925 psi83%2930 fps100%
ReloadSwiss RS 14<<locked>>80%30,269 psi47%1788 fps100%
ReloadSwiss RS 76<<locked>>80%52,344 psi81%2999 fps100%
ReloadSwiss RS 80<<locked>>80%49,052 psi75%2917 fps99%
SNPE Vectan SP 13<<locked>>88%45,992 psi71%2799 fps95.7%
Vihtavuori 20N29<<locked>>96%52,591 psi81%2943 fps95.8%
Vihtavuori N170<<locked>>80%49,603 psi76%2835 fps96.2%
Vihtavuori N565<<locked>>80%54,360 psi84%2963 fps99.8%
Vihtavuori N568<<locked>>80%49,371 psi76%2917 fps98.7%
Vihtavuori N570<<locked>>80%47,500 psi73%2917 fps96.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .26 Nosler loaded with the .264 | 140gr | Hornady InterLock. ADI AR 2218 delivers the highest muzzle velocity at 3,173 fps; across all powders the maximum-charge window runs from 1,952 fps to 3,173 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (448 MPa), the top charges use 60–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.264" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2218, Alliant Reloder-50, Norma 217 rank at the top here: for .26 Nosler with the .264 | 140gr | Hornady InterLock they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data