Load data for .26 Nosler + .263 | 150gr | Rhino Solid Shank

.26 Nosler cartridge drawing
Rhino Bullets logo

Load Specifications

Bullet Manufacturer:Rhino Bullets
Bullet Weight:150 gr
Bullet Diameter:0.263"
Bullet Length:<<locked>>
Case Length (l3):2.59"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:100.5 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:24"
Max. allowed Pressure:65,000 psi
Recommended Twist Rate:1:9.5

Load data in caliber .26 Nosler with .263 | 150gr | Rhino Solid Shank bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2218, Alliant Reloder-50 and IMR 8133 Enduron.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>96%58,479 psi90%2966 fps99.2%
ADI AR 2217<<locked>>86%56,608 psi87%2920 fps100%
ADI AR 2218<<locked>>90%57,638 psi89%3068 fps99.6%
ADI AR 2225<<locked>>88%57,711 psi89%2959 fps100%
Alliant Reloder-25<<locked>>82%57,580 psi89%2917 fps100%
Alliant Reloder-33<<locked>>86%56,927 psi88%2992 fps99.3%
Alliant Reloder-50<<locked>>88%55,825 psi86%2963 fps98.9%
Baschieri & Pellagri 109<<locked>>82%58,175 psi89%2923 fps99.5%
Bofors RP30<<locked>>84%58,059 psi89%2953 fps100%
Hodgdon H1000<<locked>>84%57,638 psi89%2933 fps100%
Hodgdon Retumbo<<locked>>82%57,566 psi89%3015 fps100%
Hodgdon TrailBossᴾ<<locked>>100%38,769 psi60%1890 fps100%
Hodgdon US 869<<locked>>94%58,682 psi90%2963 fps95.9%
IMR 7977 Enduron<<locked>>84%56,159 psi86%2838 fps96.9%
IMR 8133 Enduron<<locked>>90%57,914 psi89%2969 fps100%
Lovex D100<<locked>>88%58,784 psi90%2910 fps96.4%
Lovex S071<<locked>>82%57,899 psi89%2828 fps100%
Norma 217<<locked>>88%56,507 psi87%2940 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%40,074 psi62%1936 fps100%
ReloadSwiss RS 76<<locked>>82%58,421 psi90%2999 fps100%
ReloadSwiss RS 80<<locked>>84%58,291 psi90%2989 fps100%
Shooters World 50 BMG<<locked>>88%58,784 psi90%2910 fps96.4%
SNPE Vectan SP 13<<locked>>94%56,927 psi88%2920 fps98.7%
Vihtavuori 20N29<<locked>>98%58,407 psi90%2966 fps97.7%
Vihtavuori N170<<locked>>84%57,638 psi89%2900 fps98.4%
Vihtavuori N568<<locked>>84%57,972 psi89%2982 fps99.9%
Vihtavuori N570<<locked>>84%56,072 psi86%2995 fps99%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>84%40,480 psi62%2631 fps95.2%
ADI AR 2217<<locked>>80%47,224 psi73%2762 fps99.8%
ADI AR 221872.2 gr80%41,974 psi65%2753 fps96.3%
ADI AR 2225<<locked>>80%45,310 psi70%2759 fps100%
Alliant Reloder-25<<locked>>80%54,230 psi83%2864 fps100%
Alliant Reloder-33<<locked>>80%47,181 psi73%2812 fps97.7%
Alliant Reloder-5073.3 gr80%43,932 psi68%2733 fps96.3%
Baschieri & Pellagri 109<<locked>>80%54,853 psi84%2867 fps99.2%
Bofors RP30<<locked>>80%51,880 psi80%2851 fps100%
Hodgdon H1000<<locked>>80%50,894 psi78%2828 fps100%
Hodgdon Retumbo<<locked>>80%54,099 psi83%2959 fps100%
Hodgdon TrailBoss<<locked>>80%29,356 psi45%1690 fps100%
Hodgdon US 869<<locked>>92%55,303 psi85%2904 fps95%
IMR 7977 Enduron<<locked>>80%50,009 psi77%2730 fps95.5%
IMR 8133 Enduron66.3 gr80%43,497 psi67%2710 fps99.4%
Lovex D100<<locked>>86%55,317 psi85%2851 fps95.6%
Lovex S071<<locked>>80%54,868 psi84%2782 fps100%
Norma 217<<locked>>80%44,831 psi69%2740 fps100%
ReloadSwiss RS 14<<locked>>80%30,414 psi47%1732 fps100%
ReloadSwiss RS 76<<locked>>80%54,708 psi84%2943 fps100%
ReloadSwiss RS 80<<locked>>80%51,314 psi79%2874 fps99.7%
Shooters World 50 BMG<<locked>>86%55,317 psi85%2851 fps95.6%
SNPE Vectan SP 13<<locked>>84%42,830 psi66%2657 fps95.6%
Vihtavuori 20N29<<locked>>92%48,747 psi75%2795 fps95.5%
Vihtavuori N170<<locked>>80%51,372 psi79%2789 fps97.3%
Vihtavuori N568<<locked>>80%51,430 psi79%2871 fps99.4%
Vihtavuori N570<<locked>>80%49,676 psi76%2877 fps97.9%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .26 Nosler loaded with the .263 | 150gr | Rhino Solid Shank. ADI AR 2218 delivers the highest muzzle velocity at 3,068 fps; across all powders the maximum-charge window runs from 1,890 fps to 3,068 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (448 MPa), the top charges use 60–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.263" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2218, Alliant Reloder-50, IMR 8133 Enduron rank at the top here: for .26 Nosler with the .263 | 150gr | Rhino Solid Shank they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data