Load data for .26 Nosler + .263 | 140gr | Rhino Solid Shank

.26 Nosler cartridge drawing
Rhino Bullets logo

Load Specifications

Bullet Manufacturer:Rhino Bullets
Bullet Weight:140 gr
Bullet Diameter:0.263"
Bullet Length:<<locked>>
Case Length (l3):2.59"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:100.5 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:24"
Max. allowed Pressure:65,000 psi
Recommended Twist Rate:1:10.0

Load data in caliber .26 Nosler with .263 | 140gr | Rhino Solid Shank bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2218, Alliant Reloder-50 and Norma 217.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>96%56,246 psi87%3015 fps98.4%
ADI AR 2217<<locked>>88%58,001 psi89%3035 fps100%
ADI AR 2218<<locked>>90%55,216 psi85%3110 fps98.9%
ADI AR 2225<<locked>>88%55,317 psi85%3018 fps100%
Alliant Reloder-25<<locked>>84%58,798 psi90%3025 fps100%
Alliant Reloder-33<<locked>>88%58,247 psi90%3100 fps99.1%
Alliant Reloder-50<<locked>>90%56,811 psi87%3064 fps98.5%
Baschieri & Pellagri 109<<locked>>82%56,463 psi87%2982 fps99%
Bofors RP15<<locked>>82%58,624 psi90%3031 fps100%
Bofors RP30<<locked>>84%56,072 psi86%3012 fps100%
Hodgdon H1000<<locked>>84%55,564 psi85%2992 fps100%
Hodgdon Retumbo<<locked>>84%58,813 psi90%3130 fps100%
Hodgdon TrailBossᴾ<<locked>>100%38,783 psi60%1955 fps100%
IMR 7977 Enduron<<locked>>86%57,769 psi89%2946 fps96.5%
IMR 8133 Enduron<<locked>>92%58,813 psi90%3071 fps100%
Lovex S071<<locked>>82%56,173 psi86%2890 fps100%
Norma 217<<locked>>90%57,537 psi89%3045 fps100%
Ramshot Magnum<<locked>>82%57,711 psi89%2989 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%39,885 psi61%1998 fps100%
ReloadSwiss RS 76<<locked>>82%55,898 psi86%3054 fps100%
ReloadSwiss RS 80<<locked>>84%55,854 psi86%3041 fps99.8%
SNPE Vectan SP 13<<locked>>96%58,247 psi90%3022 fps98.4%
Vihtavuori 20N29<<locked>>98%56,144 psi86%3009 fps96.6%
Vihtavuori N170<<locked>>84%55,840 psi86%2953 fps97.5%
Vihtavuori N565<<locked>>82%57,798 psi89%3022 fps100%
Vihtavuori N568<<locked>>84%55,782 psi86%3035 fps99.5%
Vihtavuori N570<<locked>>86%57,305 psi88%3107 fps98.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 8700<<locked>>88%43,758 psi67%2779 fps95.4%
ADI AR 2217<<locked>>80%45,368 psi70%2812 fps99.4%
ADI AR 221874.9 gr82%42,917 psi66%2848 fps95.7%
ADI AR 2225<<locked>>80%43,410 psi67%2808 fps100%
Alliant Reloder-25<<locked>>80%52,185 psi80%2927 fps100%
Alliant Reloder-33<<locked>>80%45,237 psi70%2851 fps96.4%
Alliant Reloder-5076 gr82%44,614 psi69%2825 fps95.7%
Baschieri & Pellagri 109<<locked>>80%53,272 psi82%2923 fps98.5%
Bofors RP15<<locked>>80%55,347 psi85%2979 fps100%
Bofors RP30<<locked>>80%49,995 psi77%2904 fps99.8%
Hodgdon H1000<<locked>>80%48,878 psi75%2877 fps99.9%
Hodgdon Retumbo<<locked>>80%51,735 psi80%3012 fps100%
Hodgdon TrailBoss<<locked>>80%29,327 psi45%1749 fps100%
IMR 7977 Enduron<<locked>>82%51,445 psi79%2835 fps95%
IMR 8133 Enduron<<locked>>80%41,771 psi64%2753 fps98.6%
Lovex S071<<locked>>80%53,055 psi82%2841 fps100%
Norma 21767.5 gr80%42,946 psi66%2785 fps99.9%
Ramshot Magnum<<locked>>80%54,172 psi83%2933 fps100%
ReloadSwiss RS 14<<locked>>80%30,356 psi47%1791 fps100%
ReloadSwiss RS 76<<locked>>80%52,373 psi81%2999 fps100%
ReloadSwiss RS 80<<locked>>80%49,284 psi76%2923 fps99.1%
SNPE Vectan SP 13<<locked>>88%46,166 psi71%2805 fps95.8%
Vihtavuori 20N29<<locked>>94%49,661 psi76%2890 fps95%
Vihtavuori N170<<locked>>80%49,806 psi77%2841 fps96.2%
Vihtavuori N565<<locked>>80%54,433 psi84%2966 fps99.9%
Vihtavuori N568<<locked>>80%49,429 psi76%2920 fps98.7%
Vihtavuori N570<<locked>>80%47,732 psi73%2923 fps96.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .26 Nosler loaded with the .263 | 140gr | Rhino Solid Shank. Hodgdon Retumbo delivers the highest muzzle velocity at 3,130 fps; across all powders the maximum-charge window runs from 1,955 fps to 3,130 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (448 MPa), the top charges use 60–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.263" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2218, Alliant Reloder-50, Norma 217 rank at the top here: for .26 Nosler with the .263 | 140gr | Rhino Solid Shank they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data