Load data for .240 Flang. N.E. + .243 | 90gr | Nosler Ballistic Tip Hunting

.240 Flang. N.E. cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:90 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.496"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:56.99 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:9.5

Load data in caliber .240 Flang. N.E. with .243 | 90gr | Nosler Ballistic Tip Hunting bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-26, Vihtavuori N555 and Winchester StaBALL HD.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>96%41,060 psi88%2969 fps96.2%
Accurate 4350<<locked>>86%40,277 psi87%2982 fps97.7%
Alliant Reloder-16<<locked>>88%41,829 psi90%3051 fps98.4%
Alliant Reloder-17<<locked>>84%41,930 psi90%3074 fps99.5%
Alliant Reloder-23<<locked>>98%41,829 psi90%3068 fps99.5%
Alliant Reloder-25ᴾ<<locked>>100%39,088 psi84%3012 fps96.1%
Alliant Reloder-26<<locked>>94%40,756 psi88%3110 fps97.7%
Hodgdon Hybrid 100V<<locked>>90%41,655 psi90%2989 fps99.3%
Hodgdon TrailBossᴾ<<locked>>100%35,853 psi77%2018 fps100%
IMR 4831<<locked>>88%41,379 psi89%2989 fps98%
Lovex S065<<locked>>84%41,104 psi89%2923 fps96.5%
Norma URP<<locked>>86%39,987 psi86%2972 fps97.5%
Ramshot Hunter<<locked>>88%41,582 psi90%3018 fps96.2%
ReloadSwiss RS 14ᴾ<<locked>>100%36,361 psi78%2064 fps100%
ReloadSwiss RS 60<<locked>>82%41,669 psi90%3084 fps100%
ReloadSwiss RS 62<<locked>>86%40,045 psi86%2999 fps97.3%
ReloadSwiss RS 70<<locked>>86%39,363 psi85%3005 fps96.6%
Shooters World Long Rifle<<locked>>84%41,104 psi89%2923 fps96.5%
Somchem S365<<locked>>90%41,249 psi89%3048 fps99.9%
Vihtavuori N150<<locked>>82%40,756 psi88%2904 fps99.7%
Vihtavuori N160<<locked>>86%41,814 psi90%2979 fps97.9%
Vihtavuori N550<<locked>>86%41,205 psi89%2979 fps97.6%
Vihtavuori N555<<locked>>94%40,741 psi88%3035 fps98.4%
Winchester 6.5 StaBALL<<locked>>86%41,220 psi89%2943 fps99.4%
Winchester StaBALL HDᴾ<<locked>>100%40,219 psi87%3156 fps99.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>94%38,508 psi83%2910 fps95.4%
Accurate 4350<<locked>>80%32,430 psi70%2782 fps95%
Alliant Reloder-16<<locked>>80%32,401 psi70%2799 fps95%
Alliant Reloder-17<<locked>>80%36,347 psi78%2940 fps98.3%
Alliant Reloder-23<<locked>>88%30,371 psi65%2759 fps95.9%
Alliant Reloder-25<<locked>>98%36,622 psi79%2940 fps95%
Alliant Reloder-26<<locked>>90%35,317 psi76%2959 fps95.6%
Hodgdon Hybrid 100V<<locked>>80%29,994 psi65%2690 fps95.9%
Hodgdon TrailBoss<<locked>>80%26,658 psi57%1804 fps100%
IMR 4831<<locked>>82%33,837 psi73%2805 fps95.7%
Lovex S065<<locked>>82%38,522 psi83%2861 fps95.7%
Norma URP<<locked>>82%35,056 psi76%2851 fps95.9%
Ramshot Hunter<<locked>>86%38,899 psi84%2953 fps95.3%
ReloadSwiss RS 14<<locked>>80%27,195 psi59%1850 fps100%
ReloadSwiss RS 60<<locked>>80%38,653 psi83%3012 fps100%
ReloadSwiss RS 62<<locked>>82%34,606 psi75%2864 fps95.5%
ReloadSwiss RS 70<<locked>>84%36,869 psi79%2936 fps95.6%
Shooters World Long Rifle<<locked>>82%38,522 psi83%2861 fps95.7%
Somchem S365<<locked>>80%29,327 psi63%2733 fps97.2%
Vihtavuori N150<<locked>>80%38,043 psi82%2841 fps99.4%
Vihtavuori N160<<locked>>80%33,968 psi73%2789 fps95.4%
Vihtavuori N550<<locked>>80%33,707 psi73%2792 fps95%
Vihtavuori N555<<locked>>86%30,908 psi67%2782 fps95%
Winchester 6.5 StaBALL<<locked>>80%33,707 psi73%2762 fps97.7%
Winchester StaBALL HD<<locked>>90%28,660 psi62%2782 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 25 powders for .240 Flang. N.E. loaded with the .243 | 90gr | Nosler Ballistic Tip Hunting. Winchester StaBALL HD delivers the highest muzzle velocity at 3,156 fps; across all powders the maximum-charge window runs from 2,018 fps to 3,156 fps. Alliant Reloder-25 gives the best case fill at 100 %, and 25 of the 25 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 77–90 %, leaving at least 10 % headroom. The 90.0 gr projectile in 0.243" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. Alliant Reloder-25, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-26, Vihtavuori N555, Winchester StaBALL HD rank at the top here: for .240 Flang. N.E. with the .243 | 90gr | Nosler Ballistic Tip Hunting they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data