Load data for .240 Flang. N.E. + .243 | 90gr | Berger BT M T

.240 Flang. N.E. cartridge drawing
Berger logo

Load Specifications

Bullet Manufacturer:Berger
Bullet Weight:90 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.496"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:56.99 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:9.0

Load data in caliber .240 Flang. N.E. with .243 | 90gr | Berger BT M T bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-26, Winchester StaBALL HD and Vihtavuori N555.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>96%40,886 psi88%2966 fps96.1%
Accurate 4350<<locked>>86%40,132 psi86%2979 fps97.6%
Alliant Reloder-16<<locked>>88%41,698 psi90%3048 fps98.3%
Alliant Reloder-17<<locked>>84%41,742 psi90%3074 fps99.4%
Alliant Reloder-23<<locked>>98%41,698 psi90%3064 fps99.4%
Alliant Reloder-25ᴾ<<locked>>100%38,957 psi84%3005 fps96.1%
Alliant Reloder-26<<locked>>94%40,596 psi87%3104 fps97.6%
Hodgdon Hybrid 100V<<locked>>90%41,466 psi89%2986 fps99.3%
Hodgdon TrailBossᴾ<<locked>>100%35,926 psi77%2018 fps100%
IMR 4831<<locked>>88%41,234 psi89%2986 fps98%
Lovex S065<<locked>>84%40,959 psi88%2917 fps96.4%
Norma URP<<locked>>86%39,827 psi86%2969 fps97.4%
Ramshot Hunter<<locked>>88%41,727 psi90%3022 fps96.3%
ReloadSwiss RS 14ᴾ<<locked>>100%36,434 psi79%2064 fps100%
ReloadSwiss RS 60<<locked>>82%41,510 psi89%3077 fps100%
ReloadSwiss RS 62<<locked>>86%39,900 psi86%2995 fps97.3%
ReloadSwiss RS 70<<locked>>88%41,959 psi90%3071 fps97.4%
Rottweil R 903<<locked>>82%41,974 psi90%2969 fps99.4%
Shooters World Long Rifle<<locked>>84%40,959 psi88%2917 fps96.4%
Somchem S365<<locked>>90%41,118 psi89%3045 fps99.9%
Vihtavuori N150<<locked>>82%40,582 psi87%2897 fps99.7%
Vihtavuori N160<<locked>>86%41,655 psi90%2972 fps97.8%
Vihtavuori N550<<locked>>86%41,075 psi89%2976 fps97.5%
Vihtavuori N555<<locked>>94%40,553 psi87%3031 fps98.4%
Winchester 6.5 StaBALL<<locked>>86%41,394 psi89%2946 fps99.4%
Winchester StaBALL HDᴾ<<locked>>100%40,089 psi86%3153 fps99.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>94%38,363 psi83%2910 fps95.3%
Accurate 4350<<locked>>80%32,518 psi70%2785 fps95%
Alliant Reloder-16<<locked>>80%32,489 psi70%2799 fps95%
Alliant Reloder-17<<locked>>80%36,448 psi79%2943 fps98.3%
Alliant Reloder-23<<locked>>88%30,269 psi65%2756 fps95.9%
Alliant Reloder-25<<locked>>98%36,738 psi79%2946 fps95.1%
Alliant Reloder-2647 gr90%35,172 psi76%2959 fps95.5%
Hodgdon Hybrid 100V<<locked>>80%29,878 psi64%2687 fps95.9%
Hodgdon TrailBoss<<locked>>80%26,731 psi58%1804 fps100%
IMR 4831<<locked>>82%33,707 psi73%2802 fps95.6%
Lovex S065<<locked>>82%38,609 psi83%2861 fps95.7%
Norma URP<<locked>>82%34,925 psi75%2848 fps95.8%
Ramshot Hunter<<locked>>86%38,783 psi84%2949 fps95.3%
ReloadSwiss RS 14<<locked>>80%27,253 psi59%1850 fps100%
ReloadSwiss RS 60<<locked>>80%38,769 psi84%3015 fps100%
ReloadSwiss RS 62<<locked>>82%34,447 psi74%2861 fps95.4%
ReloadSwiss RS 70<<locked>>84%36,767 psi79%2936 fps95.6%
Rottweil R 903<<locked>>80%39,160 psi84%2907 fps98.9%
Shooters World Long Rifle<<locked>>82%38,609 psi83%2861 fps95.7%
Somchem S365<<locked>>80%29,385 psi63%2733 fps97.2%
Vihtavuori N150<<locked>>80%37,869 psi82%2838 fps99.4%
Vihtavuori N160<<locked>>80%34,084 psi73%2792 fps95.4%
Vihtavuori N550<<locked>>80%33,562 psi72%2785 fps95%
Vihtavuori N55541 gr86%30,980 psi67%2785 fps95.1%
Winchester 6.5 StaBALL<<locked>>80%33,605 psi72%2756 fps97.7%
Winchester StaBALL HD45.2 gr90%28,747 psi62%2785 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .240 Flang. N.E. loaded with the .243 | 90gr | Berger BT M T. Winchester StaBALL HD delivers the highest muzzle velocity at 3,153 fps; across all powders the maximum-charge window runs from 2,018 fps to 3,153 fps. Alliant Reloder-25 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 77–90 %, leaving at least 10 % headroom. The 90.0 gr projectile in 0.243" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Alliant Reloder-25, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-26, Winchester StaBALL HD, Vihtavuori N555 rank at the top here: for .240 Flang. N.E. with the .243 | 90gr | Berger BT M T they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data