Load data for .240 Flang. N.E. + .243 | 85gr | Barnes TSX BT

.240 Flang. N.E. cartridge drawing
Barnes logo

Load Specifications

Bullet Manufacturer:Barnes
Bullet Weight:85 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.496"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:56.99 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:9.5

Load data in caliber .240 Flang. N.E. with .243 | 85gr | Barnes TSX BT bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Vihtavuori N555, ReloadSwiss RS 62 and Alliant Reloder-16.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 4350<<locked>>88%39,697 psi86%3048 fps97%
Alliant Reloder- TS 15.5<<locked>>82%41,785 psi90%3048 fps99.1%
Alliant Reloder-16<<locked>>90%41,800 psi90%3127 fps97.8%
Alliant Reloder-17<<locked>>86%41,727 psi90%3150 fps99.1%
Alliant Reloder-23ᴾ<<locked>>100%41,408 psi89%3133 fps99.1%
Alliant Reloder-26<<locked>>96%40,393 psi87%3169 fps96.9%
Bofors RP3<<locked>>82%41,640 psi90%3051 fps99.2%
Hodgdon Hybrid 100V<<locked>>92%41,408 psi89%3061 fps98.9%
Hodgdon TrailBossᴾ<<locked>>100%35,563 psi77%2070 fps100%
IMR 4831<<locked>>90%40,944 psi88%3058 fps97.4%
Norma URP<<locked>>88%39,682 psi86%3045 fps96.8%
ReloadSwiss RS 14ᴾ<<locked>>100%35,955 psi77%2119 fps100%
ReloadSwiss RS 60<<locked>>84%41,481 psi89%3159 fps100%
ReloadSwiss RS 62<<locked>>88%39,465 psi85%3061 fps96.6%
Rottweil R 903<<locked>>84%41,785 psi90%3048 fps99%
SNPE Vectan SP 11<<locked>>82%40,219 psi87%3045 fps98.1%
SNPE Vectan Tubal 5000<<locked>>82%41,510 psi89%2930 fps100%
Somchem S355<<locked>>82%39,813 psi86%2992 fps98.5%
Somchem S365<<locked>>92%40,785 psi88%3117 fps99.7%
Vihtavuori N150<<locked>>84%40,640 psi88%2979 fps99.5%
Vihtavuori N160<<locked>>88%41,626 psi90%3051 fps97.3%
Vihtavuori N550<<locked>>88%40,872 psi88%3048 fps96.9%
Vihtavuori N555<<locked>>96%39,900 psi86%3094 fps97.7%
Winchester 6.5 StaBALL<<locked>>88%41,394 psi89%3022 fps99.1%
Winchester StaBALL HDᴾ<<locked>>100%36,985 psi80%3133 fps99.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 4350<<locked>>84%34,185 psi74%2907 fps95%
Alliant Reloder- TS 15.5<<locked>>80%38,986 psi84%2982 fps98.6%
Alliant Reloder-1639.9 gr84%34,316 psi74%2927 fps95.1%
Alliant Reloder-17<<locked>>80%33,910 psi73%2943 fps96.9%
Alliant Reloder-23<<locked>>92%31,734 psi68%2874 fps95.8%
Alliant Reloder-26<<locked>>94%37,376 psi81%3091 fps95.7%
Bofors RP3<<locked>>80%38,769 psi84%2989 fps98.7%
Hodgdon Hybrid 100V<<locked>>84%31,589 psi68%2812 fps96%
Hodgdon TrailBoss<<locked>>80%26,397 psi57%1854 fps100%
IMR 4831<<locked>>86%35,534 psi77%2927 fps95.6%
Norma URP<<locked>>84%34,693 psi75%2917 fps95%
ReloadSwiss RS 14<<locked>>80%26,571 psi57%1896 fps100%
ReloadSwiss RS 60<<locked>>80%36,129 psi78%3025 fps99.5%
ReloadSwiss RS 6244 gr86%36,724 psi79%2995 fps95.6%
Rottweil R 903<<locked>>80%36,260 psi78%2917 fps97.8%
SNPE Vectan SP 11<<locked>>80%37,507 psi81%2976 fps97.4%
SNPE Vectan Tubal 5000<<locked>>80%38,682 psi83%2871 fps100%
Somchem S355<<locked>>80%37,130 psi80%2930 fps97.9%
Somchem S365<<locked>>80%26,803 psi58%2717 fps95.1%
Vihtavuori N150<<locked>>80%35,302 psi76%2854 fps98.6%
Vihtavuori N160<<locked>>84%36,143 psi78%2920 fps95.5%
Vihtavuori N550<<locked>>84%35,636 psi77%2917 fps95.1%
Vihtavuori N55543.1 gr90%32,300 psi70%2900 fps95%
Winchester 6.5 StaBALL<<locked>>80%31,386 psi68%2762 fps96.1%
Winchester StaBALL HD<<locked>>94%30,168 psi65%2897 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 25 powders for .240 Flang. N.E. loaded with the .243 | 85gr | Barnes TSX BT. Alliant Reloder-26 delivers the highest muzzle velocity at 3,169 fps; across all powders the maximum-charge window runs from 2,070 fps to 3,169 fps. Alliant Reloder-23 gives the best case fill at 100 %, and 25 of the 25 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 77–90 %, leaving at least 10 % headroom. The 85.0 gr projectile in 0.243" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. Alliant Reloder-23, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Vihtavuori N555, ReloadSwiss RS 62, Alliant Reloder-16 rank at the top here: for .240 Flang. N.E. with the .243 | 85gr | Barnes TSX BT they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data