Load data for .240 Flang. N.E. + .243 | 80gr | Remington HP Power-Lokt

.240 Flang. N.E. cartridge drawing
Remington logo

Load Specifications

Bullet Manufacturer:Remington
Bullet Weight:80 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.496"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:56.99 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:10.0

Load data in caliber .240 Flang. N.E. with .243 | 80gr | Remington HP Power-Lokt bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Somchem S365 and Vihtavuori N555.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 4350<<locked>>88%39,276 psi85%3107 fps96.2%
ADI AR 2208<<locked>>82%41,713 psi90%3091 fps97.4%
Alliant Reloder- TS 15.5<<locked>>82%41,437 psi89%3114 fps98.7%
Alliant Reloder-16<<locked>>90%41,524 psi89%3192 fps97.1%
Alliant Reloder-17<<locked>>86%41,379 psi89%3215 fps98.6%
Alliant Reloder-23ᴾ<<locked>>100%40,988 psi88%3196 fps98.5%
Bofors RP3<<locked>>82%41,379 psi89%3120 fps98.8%
Hodgdon Hybrid 100V<<locked>>92%40,785 psi88%3120 fps98.4%
Hodgdon TrailBossᴾ<<locked>>100%35,375 psi76%2129 fps100%
IMR 4831<<locked>>90%40,437 psi87%3117 fps96.6%
Norma URP<<locked>>90%41,945 psi90%3169 fps96.9%
ReloadSwiss RS 14ᴾ<<locked>>100%36,071 psi78%2185 fps100%
ReloadSwiss RS 60<<locked>>84%41,205 psi89%3228 fps99.9%
ReloadSwiss RS 62<<locked>>90%41,887 psi90%3189 fps96.7%
Rottweil R 903<<locked>>84%41,510 psi89%3117 fps98.6%
SNPE Vectan SP 11<<locked>>82%40,016 psi86%3110 fps97.6%
SNPE Vectan Tubal 5000<<locked>>82%41,191 psi89%2999 fps100%
Somchem S355<<locked>>82%39,595 psi85%3061 fps98%
Somchem S365<<locked>>92%40,422 psi87%3182 fps99.4%
Vihtavuori N150<<locked>>84%40,292 psi87%3045 fps99.2%
Vihtavuori N160<<locked>>88%41,017 psi88%3110 fps96.5%
Vihtavuori N550<<locked>>88%40,654 psi88%3110 fps96.2%
Vihtavuori N555<<locked>>96%39,523 psi85%3159 fps97.1%
Winchester 6.5 StaBALL<<locked>>88%41,060 psi88%3081 fps98.6%
Winchester StaBALL HDᴾ<<locked>>100%36,912 psi80%3189 fps98.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 4350<<locked>>86%36,535 psi79%3038 fps95.2%
ADI AR 2208<<locked>>80%39,030 psi84%3025 fps96.6%
Alliant Reloder- TS 15.5<<locked>>80%38,740 psi83%3051 fps98.1%
Alliant Reloder-16<<locked>>86%36,405 psi78%3051 fps95.2%
Alliant Reloder-17<<locked>>80%33,663 psi73%3002 fps96%
Alliant Reloder-23<<locked>>94%33,866 psi73%2999 fps96.1%
Bofors RP3<<locked>>80%38,638 psi83%3054 fps98.2%
Hodgdon Hybrid 100V<<locked>>84%31,444 psi68%2871 fps95.1%
Hodgdon TrailBoss<<locked>>80%26,368 psi57%1909 fps100%
IMR 4831<<locked>>88%38,000 psi82%3058 fps95.9%
Norma URP<<locked>>86%36,854 psi79%3045 fps95.2%
ReloadSwiss RS 14<<locked>>80%26,818 psi58%1959 fps100%
ReloadSwiss RS 60<<locked>>80%35,824 psi77%3084 fps99.1%
ReloadSwiss RS 62<<locked>>88%39,117 psi84%3127 fps95.8%
Rottweil R 903<<locked>>80%36,434 psi79%2992 fps97.3%
SNPE Vectan SP 11<<locked>>80%37,405 psi81%3045 fps96.8%
SNPE Vectan Tubal 5000<<locked>>80%38,479 psi83%2940 fps100%
Somchem S355<<locked>>80%37,014 psi80%2995 fps97.3%
Somchem S36540.3 gr82%28,950 psi62%2854 fps95.5%
Vihtavuori N150<<locked>>80%35,433 psi76%2927 fps98.1%
Vihtavuori N160<<locked>>86%38,305 psi83%3041 fps95.6%
Vihtavuori N550<<locked>>86%38,029 psi82%3048 fps95.3%
Vihtavuori N55544.5 gr92%34,360 psi74%3025 fps95.2%
Winchester 6.5 StaBALL<<locked>>80%31,415 psi68%2825 fps95.3%
Winchester StaBALL HD<<locked>>96%32,140 psi69%3025 fps95.9%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 25 powders for .240 Flang. N.E. loaded with the .243 | 80gr | Remington HP Power-Lokt. ReloadSwiss RS 60 delivers the highest muzzle velocity at 3,228 fps; across all powders the maximum-charge window runs from 2,129 fps to 3,228 fps. Alliant Reloder-23 gives the best case fill at 100 %, and 25 of the 25 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 76–90 %, leaving at least 10 % headroom. The 80.0 gr projectile in 0.243" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Alliant Reloder-23, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-26, Somchem S365, Vihtavuori N555 rank at the top here: for .240 Flang. N.E. with the .243 | 80gr | Remington HP Power-Lokt they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data