Load data for .224 Weath. Mag. + .222 | 45gr | Peregrine VRG-3

.224 Weath. Mag. cartridge drawing
Peregrine logo

Load Specifications

Bullet Manufacturer:Peregrine
Bullet Weight:45 gr
Bullet Diameter:0.222"
Bullet Length:<<locked>>
Case Length (l3):1.923"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:38 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:63,817 psi

Load data in caliber .224 Weath. Mag. with .222 | 45gr | Peregrine VRG-3 bullet and 47 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, Hodgdon H322 and SNPE Vectan SP 3.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>88%56,536 psi89%3635 fps100%
Accurate 2015ᴾ<<locked>>100%53,519 psi84%3668 fps99.6%
Accurate 2460<<locked>>98%56,550 psi89%3734 fps98.2%
Accurate 2495ᴾ<<locked>>100%41,205 psi65%3478 fps98.3%
Accurate 2520ᴾ<<locked>>100%53,316 psi84%3714 fps97.4%
Accurate LT-30<<locked>>94%56,855 psi89%3648 fps99.2%
Accurate LT-32<<locked>>94%57,348 psi90%3661 fps97.9%
ADI APS 450<<locked>>82%57,159 psi90%2910 fps100%
ADI AR 2205<<locked>>82%57,319 psi90%3540 fps100%
ADI AR 2207<<locked>>92%56,536 psi89%3720 fps100%
ADI AR 2219<<locked>>94%55,608 psi87%3766 fps99%
Alliant AR-Compᴾ<<locked>>100%49,545 psi78%3701 fps100%
Alliant Reloder-10x<<locked>>98%57,014 psi89%3770 fps100%
Alliant Reloder-7<<locked>>90%54,723 psi86%3665 fps100%
Baschieri & Pellagri 106<<locked>>94%55,898 psi88%3619 fps99.4%
Hodgdon Benchmarkᴾ<<locked>>100%56,333 psi88%3688 fps96.7%
Hodgdon H322<<locked>>98%57,450 psi90%3799 fps99.2%
Hodgdon H335<<locked>>96%55,535 psi87%3750 fps98.3%
Hodgdon H4198<<locked>>90%55,622 psi87%3658 fps98.7%
Hodgdon TrailBossᴾ<<locked>>100%31,459 psi49%2326 fps100%
IMR 3031ᴾ<<locked>>100%47,108 psi74%3668 fps98.5%
IMR 4198<<locked>>96%55,100 psi86%3694 fps100%
IMR 4227<<locked>>86%55,027 psi86%3629 fps100%
Lovex D073.4<<locked>>92%57,290 psi90%3766 fps97.7%
Lovex D073.5<<locked>>98%56,898 psi89%3730 fps97.1%
Lovex S053<<locked>>88%56,695 psi89%3619 fps100%
Norma 200<<locked>>94%57,479 psi90%3750 fps100%
Norma 202ᴾ<<locked>>100%47,819 psi75%3602 fps96.9%
ReloadSwiss RS 14ᴾ<<locked>>100%31,198 psi49%2375 fps100%
ReloadSwiss RS 36<<locked>>86%55,216 psi87%3665 fps100%
ReloadSwiss RS 40<<locked>>98%56,724 psi89%3750 fps97.5%
Rottweil R 901ᴾ<<locked>>100%52,025 psi82%3658 fps97.5%
Shooters World AR Plus<<locked>>92%57,290 psi90%3766 fps97.7%
SNPE Vectan BA6 1/2<<locked>>92%56,927 psi89%3428 fps100%
SNPE Vectan SP 10<<locked>>94%56,391 psi88%3766 fps98.3%
SNPE Vectan SP 3<<locked>>96%54,955 psi86%3727 fps99.4%
SNPE Vectan Tubal 3000ᴾ<<locked>>100%51,547 psi81%3570 fps97.5%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%41,147 psi64%3356 fps96.2%
Somchem S321<<locked>>98%54,665 psi86%3720 fps96.1%
Somchem S335ᴾ<<locked>>100%50,067 psi78%3560 fps98.1%
Vihtavuori N110<<locked>>82%55,100 psi86%3507 fps100%
Vihtavuori N120<<locked>>92%56,565 psi89%3655 fps100%
Vihtavuori N130<<locked>>98%54,563 psi86%3645 fps99.9%
Vihtavuori N133ᴾ<<locked>>100%50,676 psi79%3576 fps99.3%
Vihtavuori N135ᴾ<<locked>>100%42,380 psi66%3497 fps98.4%
Vihtavuori N140ᴾ<<locked>>100%45,397 psi71%3510 fps96.7%
Winchester 748ᴾ<<locked>>100%51,967 psi81%3714 fps96.1%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%42,844 psi67%3373 fps99%
Accurate 2015<<locked>>86%33,649 psi53%3219 fps95.5%
Accurate 2460<<locked>>90%42,308 psi66%3448 fps95.1%
Accurate 2495<<locked>>94%33,098 psi52%3268 fps95.9%
Accurate 2520<<locked>>96%46,209 psi72%3573 fps95.8%
Accurate LT-30<<locked>>82%38,943 psi61%3271 fps95.7%
Accurate LT-32<<locked>>86%44,498 psi70%3402 fps95.1%
ADI APS 450<<locked>>80%54,824 psi86%2867 fps100%
ADI AR 2205<<locked>>80%53,925 psi85%3484 fps100%
ADI AR 2207<<locked>>80%38,392 psi60%3363 fps100%
ADI AR 221927.9 gr84%39,073 psi61%3409 fps95.4%
Alliant AR-Comp<<locked>>82%26,948 psi42%3081 fps95.1%
Alliant Reloder-10x<<locked>>80%31,894 psi50%3196 fps96.1%
Alliant Reloder-7<<locked>>80%39,639 psi62%3350 fps98.7%
Baschieri & Pellagri 106<<locked>>82%37,565 psi59%3235 fps95.7%
Hodgdon Benchmark<<locked>>96%49,501 psi78%3553 fps95.1%
Hodgdon H32227.6 gr86%37,840 psi59%3376 fps95%
Hodgdon H335<<locked>>88%41,466 psi65%3455 fps95.1%
Hodgdon H4198<<locked>>80%40,393 psi63%3330 fps95.4%
Hodgdon TrailBoss<<locked>>80%23,206 psi36%2093 fps100%
IMR 3031<<locked>>92%35,955 psi56%3386 fps95.3%
IMR 4198<<locked>>80%33,852 psi53%3219 fps97.7%
IMR 4227<<locked>>80%45,440 psi71%3448 fps100%
Lovex D073.4<<locked>>86%45,585 psi71%3537 fps95.2%
Lovex D073.5<<locked>>94%48,907 psi77%3579 fps95.4%
Lovex S053<<locked>>80%44,686 psi70%3406 fps100%
Norma 200<<locked>>80%36,085 psi57%3304 fps98.2%
Norma 202<<locked>>96%42,119 psi66%3471 fps95.4%
ReloadSwiss RS 14<<locked>>80%22,756 psi36%2133 fps100%
ReloadSwiss RS 36<<locked>>80%45,382 psi71%3481 fps100%
ReloadSwiss RS 40<<locked>>92%46,615 psi73%3550 fps95.3%
Rottweil R 901<<locked>>94%42,815 psi67%3458 fps95.2%
Shooters World AR Plus<<locked>>86%45,585 psi71%3537 fps95.2%
SNPE Vectan BA6 1/2<<locked>>80%40,930 psi64%3163 fps100%
SNPE Vectan SP 10<<locked>>86%42,743 psi67%3481 fps95.3%
SNPE Vectan SP 325.5 gr84%36,898 psi58%3330 fps95.7%
SNPE Vectan Tubal 3000<<locked>>94%42,511 psi67%3379 fps95.3%
SNPE Vectan Tubal 5000<<locked>>98%38,653 psi61%3294 fps95.4%
Somchem S321<<locked>>96%50,763 psi80%3645 fps95.2%
Somchem S335<<locked>>92%38,392 psi60%3301 fps95.2%
Vihtavuori N110<<locked>>80%51,605 psi81%3451 fps100%
Vihtavuori N120<<locked>>80%38,566 psi60%3320 fps100%
Vihtavuori N130<<locked>>80%30,560 psi48%3084 fps95.2%
Vihtavuori N133<<locked>>88%34,635 psi54%3209 fps95.8%
Vihtavuori N135<<locked>>92%32,489 psi51%3238 fps95.3%
Vihtavuori N140<<locked>>96%39,595 psi62%3376 fps95%
Winchester 748<<locked>>98%48,312 psi76%3638 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 47 powders for .224 Weath. Mag. loaded with the .222 | 45gr | Peregrine VRG-3. Hodgdon H322 delivers the highest muzzle velocity at 3,799 fps; across all powders the maximum-charge window runs from 2,326 fps to 3,799 fps. Accurate 2015 gives the best case fill at 100 %, and 47 of the 47 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (440 MPa), the top charges use 49–90 %, leaving at least 10 % headroom. Accurate 2015, Accurate 2495, Accurate 2520 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, Hodgdon H322, SNPE Vectan SP 3 rank at the top here: for .224 Weath. Mag. with the .222 | 45gr | Peregrine VRG-3 they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data