Load data for .223 Rem. + .224 | 55gr | Remington FMC

.223 Rem. cartridge drawing
Remington logo

Load Specifications

Bullet Manufacturer:Remington
Bullet Weight:55 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.759"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:30 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:55,000 psi
Recommended Twist Rate:1:7.5

Load data in caliber .223 Rem. with .224 | 55gr | Remington FMC bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Norma 200, ADI AR 2207 and Alliant Reloder-10x.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>88%48,225 psi88%2976 fps99.3%
Accurate 2015ᴾ<<locked>>100%43,584 psi79%2979 fps97.9%
Accurate 2460ᴾ<<locked>>100%48,573 psi88%3074 fps95.9%
Accurate LT-30<<locked>>94%48,646 psi88%2972 fps97.4%
ADI AR 2207<<locked>>92%47,253 psi86%3048 fps100%
ADI AR 2219<<locked>>96%49,168 psi89%3117 fps97.3%
Alliant AR-Compᴾ<<locked>>100%40,089 psi73%2999 fps99.2%
Alliant Reloder-10x<<locked>>98%47,572 psi86%3084 fps99.3%
Alliant Reloder-7<<locked>>92%49,632 psi90%3051 fps99.7%
Baschieri & Pellagri 106<<locked>>94%46,804 psi85%2949 fps97.4%
Hodgdon H322<<locked>>98%47,079 psi86%3081 fps96.9%
Hodgdon H335<<locked>>98%48,051 psi87%3091 fps96%
Hodgdon H4198<<locked>>90%47,471 psi86%2972 fps96.5%
Hodgdon TrailBossᴾ<<locked>>100%30,908 psi56%1909 fps100%
IMR 4198<<locked>>98%49,342 psi90%3068 fps99.8%
IMR 4227<<locked>>86%47,616 psi87%2972 fps100%
Lovex S053<<locked>>88%49,298 psi90%2979 fps100%
Norma 200<<locked>>94%47,224 psi86%3061 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%30,298 psi55%1949 fps100%
ReloadSwiss RS 36<<locked>>86%47,529 psi86%3009 fps100%
SNPE Vectan BA6 1/2<<locked>>90%47,369 psi86%2792 fps100%
SNPE Vectan SP 10<<locked>>96%49,690 psi90%3117 fps96.3%
SNPE Vectan SP 3<<locked>>98%48,399 psi88%3077 fps98%
Vihtavuori N110<<locked>>82%48,356 psi88%2890 fps100%
Vihtavuori N120<<locked>>92%47,427 psi86%3002 fps100%
Vihtavuori N130ᴾ<<locked>>100%48,283 psi88%3018 fps99.2%
Vihtavuori N133ᴾ<<locked>>100%41,756 psi76%2904 fps97.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%36,941 psi67%2756 fps97.2%
Accurate 2015<<locked>>92%33,446 psi61%2762 fps95%
Accurate 2460<<locked>>98%45,165 psi82%3012 fps95%
Accurate LT-30<<locked>>88%40,625 psi74%2818 fps95.4%
ADI AR 220717 gr80%32,111 psi58%2740 fps99.1%
ADI AR 2219<<locked>>90%40,292 psi73%2943 fps95%
Alliant AR-Comp<<locked>>90%29,312 psi53%2717 fps95.8%
Alliant Reloder-10x18 gr84%30,211 psi55%2700 fps95%
Alliant Reloder-7<<locked>>80%33,852 psi62%2730 fps96.9%
Baschieri & Pellagri 106<<locked>>88%38,841 psi71%2795 fps95.3%
Hodgdon H322<<locked>>94%41,423 psi75%2966 fps95.4%
Hodgdon H335<<locked>>96%45,426 psi83%3041 fps95.4%
Hodgdon H4198<<locked>>86%42,395 psi77%2874 fps95.2%
Hodgdon TrailBoss<<locked>>80%22,321 psi41%1703 fps100%
IMR 4198<<locked>>80%29,211 psi53%2612 fps95.4%
IMR 4227<<locked>>80%39,900 psi73%2828 fps99.5%
Lovex S053<<locked>>80%38,682 psi70%2792 fps100%
Norma 20017.8 gr80%30,197 psi55%2687 fps96%
ReloadSwiss RS 14<<locked>>80%22,452 psi41%1755 fps100%
ReloadSwiss RS 36<<locked>>80%38,957 psi71%2848 fps99.3%
SNPE Vectan BA6 1/2<<locked>>80%35,998 psi65%2602 fps100%
SNPE Vectan SP 10<<locked>>94%46,253 psi84%3058 fps95.5%
SNPE Vectan SP 3<<locked>>90%37,927 psi69%2867 fps95.4%
Vihtavuori N110<<locked>>80%45,484 psi83%2844 fps100%
Vihtavuori N120<<locked>>80%32,343 psi59%2710 fps99.7%
Vihtavuori N130<<locked>>86%31,444 psi57%2667 fps95.2%
Vihtavuori N133<<locked>>94%34,795 psi63%2749 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 53 powders for .223 Rem. loaded with the .224 | 55gr | Remington FMC. Alliant Power Pro 1200-R delivers the highest muzzle velocity at 3,179 fps; across all powders the maximum-charge window runs from 1,909 fps to 3,179 fps. Accurate 2015 gives the best case fill at 100 %, and 53 of the 53 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (379 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. The 55.0 gr projectile in 0.224" calls for a 1:7.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2460, Accurate 2495 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Norma 200, ADI AR 2207, Alliant Reloder-10x rank at the top here: for .223 Rem. with the .224 | 55gr | Remington FMC they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2520, ADI Benchmark 8208, Alliant Power Pro 1200-R burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data