Load data for .223 Rem. + .224 | 50gr | Sierra SP Blitz

.223 Rem. cartridge drawing
Sierra logo

Load Specifications

Bullet Manufacturer:Sierra
Bullet Weight:50 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.759"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:30 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:55,000 psi

Load data in caliber .223 Rem. with .224 | 50gr | Sierra SP Blitz bullet and 29 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Alliant Reloder-10x and ADI AR 2219.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%48,240 psi88%3159 fps99.3%
Accurate 2015ᴾ<<locked>>100%47,123 psi86%3219 fps98.6%
Accurate 2460<<locked>>98%49,588 psi90%3268 fps96.3%
Accurate 2495ᴾ<<locked>>100%35,462 psi64%3045 fps96.4%
Accurate LT-30<<locked>>92%48,762 psi89%3159 fps97.6%
ADI AR 2207<<locked>>90%47,326 psi86%3232 fps100%
ADI AR 2219<<locked>>94%49,487 psi90%3310 fps97.6%
Alliant AR-Compᴾ<<locked>>100%43,627 psi79%3248 fps99.7%
Alliant Reloder-10x<<locked>>96%47,863 psi87%3271 fps99.4%
Alliant Reloder-7<<locked>>90%49,705 psi90%3235 fps99.7%
Baschieri & Pellagri 106<<locked>>92%47,253 psi86%3133 fps97.7%
Hodgdon H322<<locked>>96%47,587 psi87%3271 fps97.2%
Hodgdon H335<<locked>>96%48,849 psi89%3284 fps96.5%
Hodgdon H4198<<locked>>88%47,616 psi87%3159 fps96.7%
Hodgdon TrailBossᴾ<<locked>>100%30,922 psi56%2064 fps100%
IMR 3031ᴾ<<locked>>100%41,568 psi76%3212 fps96.6%
IMR 4198<<locked>>96%49,443 psi90%3255 fps99.9%
IMR 4227<<locked>>84%47,210 psi86%3156 fps100%
Lovex S053<<locked>>86%48,965 psi89%3159 fps100%
Norma 200<<locked>>92%47,819 psi87%3248 fps99.7%
ReloadSwiss RS 36<<locked>>84%47,166 psi86%3186 fps100%
SNPE Vectan BA6 1/2<<locked>>88%47,108 psi86%2966 fps100%
SNPE Vectan SP 10<<locked>>94%49,588 psi90%3297 fps96.5%
SNPE Vectan SP 3<<locked>>96%48,559 psi88%3268 fps98.2%
Somchem S335ᴾ<<locked>>100%44,628 psi81%3127 fps96.4%
Vihtavuori N120<<locked>>90%47,471 psi86%3182 fps100%
Vihtavuori N130<<locked>>98%48,675 psi88%3205 fps99.3%
Vihtavuori N133ᴾ<<locked>>100%44,976 psi82%3140 fps98.1%
Vihtavuori N135ᴾ<<locked>>100%37,057 psi67%3061 fps96.5%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%39,030 psi71%2976 fps97.8%
Accurate 2015<<locked>>90%34,040 psi62%2936 fps95.2%
Accurate 2460<<locked>>96%45,876 psi83%3199 fps95.4%
Accurate 2495<<locked>>98%33,040 psi60%2986 fps95.5%
Accurate LT-30<<locked>>86%40,553 psi74%2995 fps95.6%
ADI AR 2207<<locked>>80%34,534 psi63%2966 fps99.5%
ADI AR 221923.6 gr88%40,335 psi73%3117 fps95.2%
Alliant AR-Comp<<locked>>86%27,920 psi51%2828 fps95.1%
Alliant Reloder-10x20.1 gr82%30,777 psi56%2874 fps95.2%
Alliant Reloder-7<<locked>>80%36,274 psi66%2959 fps97.6%
Baschieri & Pellagri 106<<locked>>86%38,711 psi70%2959 fps95.5%
Hodgdon H32223.8 gr92%41,379 psi75%3143 fps95.5%
Hodgdon H335<<locked>>94%45,281 psi82%3215 fps95.5%
Hodgdon H4198<<locked>>84%42,018 psi76%3045 fps95.2%
Hodgdon TrailBoss<<locked>>80%22,843 psi42%1857 fps100%
IMR 3031<<locked>>98%39,001 psi71%3146 fps95.8%
IMR 4198<<locked>>80%30,922 psi56%2831 fps96.1%
IMR 4227<<locked>>80%41,959 psi76%3051 fps99.7%
Lovex S053<<locked>>80%41,002 psi75%3015 fps100%
Norma 200<<locked>>80%32,576 psi59%2910 fps96.8%
ReloadSwiss RS 36<<locked>>80%41,539 psi76%3077 fps99.7%
SNPE Vectan BA6 1/2<<locked>>80%37,913 psi69%2808 fps100%
SNPE Vectan SP 10<<locked>>92%46,615 psi85%3238 fps95.8%
SNPE Vectan SP 3<<locked>>88%38,043 psi69%3045 fps95.5%
Somchem S335<<locked>>98%41,974 psi76%3071 fps95.7%
Vihtavuori N120<<locked>>80%34,693 psi63%2930 fps99.9%
Vihtavuori N130<<locked>>84%31,662 psi58%2831 fps95.3%
Vihtavuori N133<<locked>>92%35,389 psi64%2930 fps95.5%
Vihtavuori N135<<locked>>98%34,737 psi63%3002 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 29 powders for .223 Rem. loaded with the .224 | 50gr | Sierra SP Blitz. ADI AR 2219 delivers the highest muzzle velocity at 3,310 fps; across all powders the maximum-charge window runs from 2,064 fps to 3,310 fps. Accurate 2015 gives the best case fill at 100 %, and 29 of the 29 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (379 MPa), the top charges use 56–90 %, leaving at least 10 % headroom. Accurate 2015, Accurate 2495, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Alliant Reloder-10x, ADI AR 2219 rank at the top here: for .223 Rem. with the .224 | 50gr | Sierra SP Blitz they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data