Load data for .223 Rem. + .224 | 50gr | Nosler Ballistic Tip Lead Free

.223 Rem. cartridge drawing
Nosler logo

Load Specifications

Bullet Manufacturer:Nosler
Bullet Weight:50 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.759"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:30 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:55,000 psi
Recommended Twist Rate:1:8.5

Load data in caliber .223 Rem. with .224 | 50gr | Nosler Ballistic Tip Lead Free bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Norma 200 and ADI AR 2207.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>90%49,559 psi90%3150 fps99.1%
Accurate 2015ᴾ<<locked>>100%41,582 psi76%3087 fps96.9%
Accurate LT-30<<locked>>94%46,963 psi85%3091 fps96.5%
ADI AR 2205<<locked>>82%48,936 psi89%3048 fps100%
ADI AR 2207<<locked>>94%48,211 psi88%3225 fps100%
ADI AR 2219<<locked>>96%47,239 psi86%3228 fps96.3%
Alliant AR-Compᴾ<<locked>>100%38,363 psi70%3104 fps98.5%
Alliant Reloder-10xᴾ<<locked>>100%47,819 psi87%3241 fps99.1%
Alliant Reloder-7<<locked>>92%47,616 psi87%3173 fps99.3%
Baschieri & Pellagri 106<<locked>>96%48,573 psi88%3123 fps97.3%
Hodgdon H322ᴾ<<locked>>100%48,559 psi88%3255 fps96.6%
Hodgdon H4198<<locked>>92%49,255 psi90%3156 fps96.3%
Hodgdon TrailBossᴾ<<locked>>100%30,124 psi55%2021 fps100%
IMR 4198<<locked>>98%47,776 psi87%3196 fps99.5%
IMR 4227<<locked>>88%48,849 psi89%3153 fps100%
Lovex D060<<locked>>82%49,298 psi90%3202 fps99.5%
Lovex S053<<locked>>88%46,992 psi85%3104 fps100%
Norma 200<<locked>>96%47,892 psi87%3228 fps99.5%
ReloadSwiss RS 14ᴾ<<locked>>100%29,356 psi53%2057 fps100%
ReloadSwiss RS 36<<locked>>88%48,124 psi87%3179 fps99.9%
Shooters World Buffalo Rifle<<locked>>82%49,298 psi90%3202 fps99.5%
SNPE Vectan BA6 1/2<<locked>>92%48,225 psi88%2963 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%49,617 psi90%3251 fps97.8%
Vihtavuori N110<<locked>>84%49,458 psi90%3071 fps100%
Vihtavuori N120<<locked>>94%48,370 psi88%3176 fps100%
Vihtavuori N130ᴾ<<locked>>100%46,586 psi85%3140 fps98.6%
Vihtavuori N133ᴾ<<locked>>100%40,277 psi73%3012 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%35,186 psi64%2858 fps96.1%
Accurate 2015<<locked>>96%35,969 psi65%2963 fps95.2%
Accurate LT-30<<locked>>90%41,568 psi76%2982 fps95%
ADI AR 2205<<locked>>80%46,354 psi84%3005 fps100%
ADI AR 220717.9 gr80%30,240 psi55%2838 fps98.2%
ADI AR 2219<<locked>>94%44,063 psi80%3166 fps95.5%
Alliant AR-Comp<<locked>>92%29,834 psi54%2864 fps95.2%
Alliant Reloder-10x<<locked>>88%32,503 psi59%2907 fps95.3%
Alliant Reloder-7<<locked>>80%32,285 psi59%2835 fps95.7%
Baschieri & Pellagri 106<<locked>>92%42,685 psi78%3012 fps95.9%
Hodgdon H322<<locked>>98%45,310 psi82%3192 fps95.8%
Hodgdon H4198<<locked>>90%46,050 psi84%3094 fps95.5%
Hodgdon TrailBoss<<locked>>80%21,988 psi40%1814 fps100%
IMR 4198<<locked>>84%31,604 psi57%2825 fps95.7%
IMR 4227<<locked>>80%38,305 psi70%2946 fps99%
Lovex D060<<locked>>80%46,079 psi84%3140 fps99.1%
Lovex S053<<locked>>80%37,028 psi67%2910 fps100%
Norma 20019.3 gr82%30,458 psi55%2838 fps95.4%
ReloadSwiss RS 14<<locked>>80%21,495 psi39%1850 fps100%
ReloadSwiss RS 36<<locked>>80%37,434 psi68%2963 fps98.7%
Shooters World Buffalo Rifle<<locked>>80%46,079 psi84%3140 fps99.1%
SNPE Vectan BA6 1/2<<locked>>80%34,896 psi63%2733 fps100%
SNPE Vectan SP 3<<locked>>94%40,814 psi74%3077 fps95.7%
Vihtavuori N110<<locked>>80%43,308 psi79%2972 fps100%
Vihtavuori N120<<locked>>80%30,472 psi55%2808 fps99.1%
Vihtavuori N130<<locked>>90%33,779 psi61%2867 fps95.4%
Vihtavuori N133<<locked>>98%37,608 psi68%2953 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .223 Rem. loaded with the .224 | 50gr | Nosler Ballistic Tip Lead Free. Hodgdon H322 delivers the highest muzzle velocity at 3,255 fps; across all powders the maximum-charge window runs from 2,021 fps to 3,255 fps. Accurate 2015 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (379 MPa), the top charges use 53–90 %, leaving at least 10 % headroom. The 50.0 gr projectile in 0.224" calls for a 1:8.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Alliant AR-Comp, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon Benchmark, Norma 200, ADI AR 2207 rank at the top here: for .223 Rem. with the .224 | 50gr | Nosler Ballistic Tip Lead Free they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data